From: Michal Simek <monstr-pSz03upnqPeHXe+LvDLADg@public.gmane.org>
To: Trond Myklebust
<Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org>
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: NFS on little-endian platform - Microblaze
Date: Wed, 16 Feb 2011 15:16:56 +0100 [thread overview]
Message-ID: <4D5BDC58.9020906@monstr.eu> (raw)
In-Reply-To: <1297865074.6596.10.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
Trond Myklebust wrote:
> On Wed, 2011-02-16 at 14:53 +0100, Michal Simek wrote:
>> Trond Myklebust wrote:
>>> On Wed, 2011-02-16 at 14:16 +0100, Michal Simek wrote:
>>>> Hi again,
>>>>
>>>> I forget to cc linux-nfs mailing list.
>>>>
>>>> Michal
>>>>
>>>> P.S.: Tested on kernels 2.6.38-rc4, 2.6.37 and 2.6.36
>>>>
>>>> Michal Simek wrote:
>>>>> Hi All,
>>>>>
>>>>> I am trying to understand one problem which we have found.
>>>>> The problem is that I can't on Microblaze little-endian platform
>>>>> mount nfs without -o nolock options. (Log below)
>>>>> Selecting tcp or udp has no effect.
>>>>> I am using emaclite driver and there is no problem on big endian
>>>>> microblaze.
>>>>>
>>>>> ping, telnet, http, ftp, iperf, netperf work well.
>>>>>
>>>>> That's why I have a question if there is any endian specific option for
>>>>> NFS?
>>>>>
>>>>> Thanks,
>>>>> Michal
>>>>>
>>>>> ~ # mount -t nfs 192.168.0.101:/tftpboot/nfs /mnt
>>>>> svc: failed to register lockdv1 RPC service (errno 13).
>>>>> lockd_up: makesock failed, error=-13
>>>>> svc: failed to register lockdv1 RPC service (errno 13).
>>>>> ~ # mount -t nfs -o nolock 192.168.0.101:/tftpboot/nfs /mnt
>>>>> ~ # mount
>>>>> rootfs on / type rootfs (rw)
>>>>> proc on /proc type proc (rw,relatime)
>>>>> none on /var type ramfs (rw,relatime)
>>>>> none on /sys type sysfs (rw,relatime)
>>>>> none on /etc/config type ramfs (rw,relatime)
>>>>> none on /dev/pts type devpts (rw,relatime,mode=600)
>>>>> 192.168.0.101:/tftpboot/nfs on /mnt type nfs
>>>>> (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,hard,nolock,proto=udp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.101)
>>>>>
>>>>> ~ #
>>>>> ~ # ps
>>>>> PID USER TIME COMMAND
>>>>> 1 root 0:02 init
>>>>> 2 root 0:00 [kthreadd]
>>>>> 3 root 0:00 [ksoftirqd/0]
>>>>> 4 root 0:00 [kworker/0:0]
>>>>> 5 root 0:00 [kworker/u:0]
>>>>> 6 root 0:00 [khelper]
>>>>> 7 root 0:00 [sync_supers]
>>>>> 8 root 0:00 [bdi-default]
>>>>> 9 root 0:00 [kblockd]
>>>>> 10 root 0:00 [rpciod]
>>>>> 11 root 0:00 [kworker/0:1]
>>>>> 12 root 0:00 [kswapd0]
>>>>> 13 root 0:00 [fsnotify_mark]
>>>>> 14 root 0:00 [aio]
>>>>> 15 root 0:00 [nfsiod]
>>>>> 16 root 0:00 [kworker/u:1]
>>>>> 58 root 0:00 udhcpc -R -n -p /var/run/udhcpc.eth0.pid -i eth0
>>>>> 62 1 0:00 /bin/portmap
>>>>> 64 root 0:00 /bin/inetd /etc/inetd.conf
>>>>> 65 root 0:01 -sh
>>>>> 66 root 0:00 /bin/syslogd -n
>>>>> 67 root 0:00 /bin/flatfsd
>>>>> 68 root 0:00 [kworker/0:2]
>>>>> 91 root 0:00 ps
>>> Where is rpc.statd? Without it, the above behaviour is 100% expected.
>> I see on BE that lockd is used but it is enabled on little endian too but hasn't started.
>>
>> Enabled options:
>> CONFIG_NETWORK_FILESYSTEMS=y
>> CONFIG_NFS_FS=y
>> CONFIG_NFS_V3=y
>> CONFIG_LOCKD=y
>> CONFIG_LOCKD_V4=y
>> CONFIG_NFS_COMMON=y
>> CONFIG_SUNRPC=y
>>
>> On Be lockd is up.
>> 69 root 0:00 /bin/flatfsd
>> 71 root 0:00 [lockd]
>> 73 root 0:00 ps
>>
>> I have to look why.
>> How is it started?
>
> Either rpc.bind or rpc.portmap and then rpc.statd need to be started
> manually (in that order) before you may mount the NFS partition without
> '-onolock'. The lockd daemon itself will be started by the kernel
> whenever there is a need for it.
On big-endian system is not any rpc* binary either that's why I think this is not a problem.
Only portmap is started on both systems. Nothing more. If you want I can send you cpio archive.
>
> Please check your 'init' boot scripts to find out why they are not being
> started as expected.
ok.
Michal
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-02-16 14:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 13:09 NFS on little-endian platform - Microblaze Michal Simek
[not found] ` <4D5BCC74.9010301-pSz03upnqPeHXe+LvDLADg@public.gmane.org>
2011-02-16 13:16 ` Michal Simek
2011-02-16 13:22 ` Trond Myklebust
[not found] ` <1297862575.6596.0.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2011-02-16 13:53 ` Michal Simek
2011-02-16 14:04 ` Trond Myklebust
[not found] ` <1297865074.6596.10.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2011-02-16 14:16 ` Michal Simek [this message]
2011-02-17 12:01 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5BDC58.9020906@monstr.eu \
--to=monstr-psz03upnqpehxe+lvdladg@public.gmane.org \
--cc=Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).