Re: [PATCH v4 1/1] can: add pruss CAN driver. - Marc Kleine-Budde

From: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Subhasish Ghosh
	<subhasish-EvXpCiN+lbve9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Cc: sachi-EvXpCiN+lbve9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
	davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
	Netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	nsekhar-l0cyMroinI0@public.gmane.org,
	open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	CAN NETWORK DRIVERS
	<socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	m-watkins-l0cyMroinI0@public.gmane.org,
	Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
Subject: Re: [PATCH v4 1/1] can: add pruss CAN driver.
Date: Wed, 27 Apr 2011 15:21:56 +0200	[thread overview]
Message-ID: <4DB81874.1060904@pengutronix.de> (raw)
In-Reply-To: <46D523E49EFF489F9B088AE7B9CD7286@subhasishg>

[-- Attachment #1.1: Type: text/plain, Size: 2178 bytes --]

On 04/27/2011 03:08 PM, Subhasish Ghosh wrote:

>>>> +static u32 pruss_intc_init[19][3] = {
>>>> + {PRUSS_INTC_POLARITY0, PRU_INTC_REGMAP_MASK, 0xFFFFFFFF},
>>>> + {PRUSS_INTC_POLARITY1, PRU_INTC_REGMAP_MASK, 0xFFFFFFFF},
>>>> + {PRUSS_INTC_TYPE0, PRU_INTC_REGMAP_MASK, 0x1C000000},
>>>> + {PRUSS_INTC_TYPE1, PRU_INTC_REGMAP_MASK, 0},
>>>> + {PRUSS_INTC_GLBLEN, 0, 1},
>>>> + {PRUSS_INTC_HOSTMAP0, PRU_INTC_REGMAP_MASK, 0x03020100},
>>>> + {PRUSS_INTC_HOSTMAP1, PRU_INTC_REGMAP_MASK, 0x07060504},
>>>> + {PRUSS_INTC_HOSTMAP2, PRU_INTC_REGMAP_MASK, 0x0000908},
>>>> + {PRUSS_INTC_CHANMAP0, PRU_INTC_REGMAP_MASK, 0},
>>>> + {PRUSS_INTC_CHANMAP8, PRU_INTC_REGMAP_MASK, 0x00020200},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 32},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 19},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 19},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 18},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 18},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 34},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 34},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 32},
>>>> + {PRUSS_INTC_HOSTINTEN, 0, 5}
>>>
>>> please add ","
>>
>> Also a struct to describe each entry would improve readability.
>> Then you could also use ARRAY_SIZE.
> 
> SG _ I could not follow this, are you recommending that I create a
> structure with three variables and then create
>            an array for it.
> something like:
> 
> const static struct [] = {
>    {
>    unsigned int reg_base;
>    unsigned int reg_mask;
>    unsigned int reg_val;
>    },
> ...
> };

I think this isn't valid C. It should look like this:

struct pruss_intc_init {
	unsigned long reg_base;
	u32 reg_mask;
	u32 reg+val;
};

static const struct pruss_intc_init pruss_initc_init[] = {
	{ .reg_base = 0xdeadbeef, .reg_mask = 0xaa, .reg_val = 0x55 },
	...
};

I'm not sure about the datatype of reg_base. I haven't looked at the
code that uses this array.

cheers, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core