From: WeipingPan <panweiping3@gmail.com>
To: "open list:NETWORKING [GENERAL]" <netdev@vger.kernel.org>
Subject: netxen_nic: unregister_netdevice error
Date: Tue, 31 May 2011 14:15:24 +0800 [thread overview]
Message-ID: <4DE4877C.1070704@gmail.com> (raw)
hi,
When test bonding broadcast mode I met a problem.
modprobe -r bonding will fail after I ping broadcast address.
I find that the problem only shows up when I use netxen_nic driver.
When use ixgbe and bn2x2 driver, no problem occurs.
I use RHEL 6.2, kernel 2.6.32-131.0.15.el6.i686,
Can anybody confirm this bug using 2.6.39 or upstream ?
many thanks
Weiping Pan
The test script is followed.
#test script start
#!/bin/bash
NETWORK_CARD0=eth1
NETWORK_CARD1=eth2
function broadcast_test()
{
modprobe bonding mode=broadcast miimon=100
ifconfig bond0 192.168.8.2 netmask 255.255.255.0 up
ifconfig $NETWORK_CARD0 down
ifconfig $NETWORK_CARD1 down
echo +$NETWORK_CARD0 > /sys/class/net/bond0/bonding/slaves
echo +$NETWORK_CARD1 > /sys/class/net/bond0/bonding/slaves
ping 192.168.8.255 -b -c 10
modprobe -r bonding
}
# main
echo 0 >/proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
modprobe -r bonding
for i in `seq 1 10`
do
echo "*******************"
echo "***iteration$i*****"
echo -e "*******************\n\n"
broadcast_test
done
#test script end
Some information is followed.
[root@hp-magnycours-01 ~]# uname -a
Linux hp-magnycours-01.rhts.eng.bos.redhat.com 2.6.32-131.0.15.el6.i686
#1 SMP Tue May 10 15:42:28 EDT 2011 i686 i686 i386 GNU/Linux
[root@hp-magnycours-01 ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.1 (Santiago)
[root@hp-magnycours-01 ~]# lspci |grep Ethernet
04:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
04:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
04:00.2 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
04:00.3 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
[root@hp-magnycours-01 ~]# lsmod |grep net
netxen_nic 83405 0
[root@hp-magnycours-01 ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 1C:C1:DE:EE:28:F0
inet addr:10.16.64.212 Bcast:10.16.71.255 Mask:255.255.248.0
inet6 addr: fec0:0:a10:4000:1ec1:deff:feee:28f0/64 Scope:Site
inet6 addr: fe80::1ec1:deff:feee:28f0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13417 errors:0 dropped:0 overruns:0 frame:0
TX packets:713 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1110663 (1.0 MiB) TX bytes:90272 (88.1 KiB)
Interrupt:93
eth1 Link encap:Ethernet HWaddr 1C:C1:DE:EE:28:F1
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:97
eth2 Link encap:Ethernet HWaddr 1C:C1:DE:EE:28:F2
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:101
eth3 Link encap:Ethernet HWaddr 1C:C1:DE:EE:28:F3
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:105
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10557 (10.3 KiB) TX bytes:10557 (10.3 KiB)
[root@hp-magnycours-01 ~]# ./test_bonding_broadcast.sh |tee log
*******************
***iteration1*****
*******************
WARNING: pinging broadcast address
PING 192.168.8.255 (192.168.8.255) 56(84) bytes of data.
64 bytes from 192.168.8.2: icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from 192.168.8.2: icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from 192.168.8.2: icmp_seq=3 ttl=64 time=0.027 ms
64 bytes from 192.168.8.2: icmp_seq=4 ttl=64 time=0.026 ms
64 bytes from 192.168.8.2: icmp_seq=5 ttl=64 time=0.030 ms
64 bytes from 192.168.8.2: icmp_seq=6 ttl=64 time=0.024 ms
64 bytes from 192.168.8.2: icmp_seq=7 ttl=64 time=0.024 ms
64 bytes from 192.168.8.2: icmp_seq=8 ttl=64 time=0.023 ms
64 bytes from 192.168.8.2: icmp_seq=9 ttl=64 time=0.024 ms
64 bytes from 192.168.8.2: icmp_seq=10 ttl=64 time=0.023 ms
--- 192.168.8.255 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9000ms
rtt min/avg/max/mdev = 0.023/0.027/0.041/0.005 ms
Message from syslogd@hp-magnycours-01 at May 25 04:07:22 ...
kernel:unregister_netdevice: waiting for bond0 to become free. Usage
count = 1
Message from syslogd@hp-magnycours-01 at May 25 04:07:33 ...
kernel:unregister_netdevice: waiting for bond0 to become free. Usage
count = 1
[root@hp-magnycours-01 ~]# dmesg
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
bonding: MII link monitoring set to 100 ms
ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth1.
bonding: bond0: enslaving eth1 as an active interface with a down link.
netxen_nic: eth1 NIC Link is up
bonding: bond0: Adding slave eth2.
bonding: bond0: enslaving eth2 as an active interface with a down link.
netxen_nic: eth2 NIC Link is up
bonding: bond0: link status definitely up for interface eth1.
bonding: bond0: link status definitely up for interface eth2.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bond0: IPv6 duplicate address fe80::1ec1:deff:feee:28f1 detected!
bonding: bond0: released all slaves
unregister_netdevice: waiting for bond0 to become free. Usage count = 1
unregister_netdevice: waiting for bond0 to become free. Usage count = 1
unregister_netdevice: waiting for bond0 to become free. Usage count = 1
unregister_netdevice: waiting for bond0 to become free. Usage count = 1
next reply other threads:[~2011-05-31 6:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-31 6:15 WeipingPan [this message]
2011-05-31 9:19 ` netxen_nic: unregister_netdevice error Jiri Pirko
2011-05-31 9:21 ` WeipingPan
2011-05-31 9:48 ` Eric Dumazet
2011-05-31 10:12 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DE4877C.1070704@gmail.com \
--to=panweiping3@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).