From: Alexander Duyck <alexander.h.duyck@intel.com>
To: Ben Hutchings <bhutchings@solarflare.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
davem@davemloft.net, netdev@vger.kernel.org, gospo@redhat.com
Subject: Re: [net-next 31/40] ethtool: remove support for ETHTOOL_GRXNTUPLE
Date: Tue, 07 Jun 2011 15:20:04 -0700 [thread overview]
Message-ID: <4DEEA414.1010205@intel.com> (raw)
In-Reply-To: <1307451997.2908.13.camel@bwh-desktop>
On 06/07/2011 06:06 AM, Ben Hutchings wrote:
> On Tue, 2011-06-07 at 05:33 -0700, Jeff Kirsher wrote:
>> From: Alexander Duyck<alexander.h.duyck@intel.com>
>>
>> This change is meant to remove all support for displaying an ntuple as
>> strings via ETHTOOL_GRXNTUPLE. The reason for this change is due to the
>> fact that multiple issues have been found including:
>> - Multiple buffer overruns for strings being displayed.
>> - Incorrect filters displayed, cleared filters with ring of -2 are displayed
>> - Setting get_rx_ntuple displays no rules if defined.
>> - Endianess wrong on displayed values.
>> - Hard limit of 1024 filters makes display functionality extremely limited
>>
>> The only driver that had supported this interface was ixgbe. Since it no
>> longer uses the interface and due to the issues mentioned above I am
>> submitting this patch to remove it.
>>
>> Signed-off-by: Alexander Duyck<alexander.h.duyck@intel.com>
>> Tested-by: Ross Brattain<ross.b.brattain@intel.com>
>> Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@intel.com>
>> ---
>> include/linux/ethtool.h | 8 +-
>> include/linux/netdevice.h | 3 -
>> net/core/dev.c | 5 -
>> net/core/ethtool.c | 299 ---------------------------------------------
>> 4 files changed, 2 insertions(+), 313 deletions(-)
>>
>> diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
>> index c6a850a..3310ab6 100644
>> --- a/include/linux/ethtool.h
>> +++ b/include/linux/ethtool.h
>> @@ -287,7 +287,7 @@ enum ethtool_stringset {
>> ETH_SS_TEST = 0,
>> ETH_SS_STATS,
>> ETH_SS_PRIV_FLAGS,
>> - ETH_SS_NTUPLE_FILTERS,
>> + ETH_SS_DO_NOT_USE, /* was ETH_SS_NTUPLE_FILTERS */
>> ETH_SS_FEATURES,
>> };
>>
> Since this feature didn't work properly, any code that tried to use it
> didn't really work, but it still feels kind of wrong to turn that into a
> compile error. And it does no harm to leave the definition here, though
> you may want to comment that it is no longer supported.
>
Ok, if Jeff can pull that patch I will redo it with the definition left
behind and a comment added.
>> @@ -720,8 +720,6 @@ struct ethtool_rx_ntuple_flow_spec_container {
>> };
>>
>> struct ethtool_rx_ntuple_list {
>> -#define ETHTOOL_MAX_NTUPLE_LIST_ENTRY 1024
>> -#define ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY 14
>> struct list_head list;
>> unsigned int count;
>> };
> You can remove struct ethtool_rx_ntuple_flow_spec_container and struct
> ethtool_rx_ntuple_list as they were not exposed to userland.
>
> [...]
>> @@ -1017,7 +1013,7 @@ struct ethtool_ops {
>> #define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
>> #define ETHTOOL_RESET 0x00000034 /* Reset hardware */
>> #define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
>> -#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
>> +/* ETHTOOL_GRXNTUPLE 0x00000036 disabled due to multiple issues */
>> #define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
>> #define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
>> #define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
> [...]
>
> Same here; the command number needs to be reserved forever and the
> definition does no harm.
>
> Ben.
Same for this. I will update it so that the definition remains, but
comment that it should not be used.
Thanks,
Alex
next prev parent reply other threads:[~2011-06-07 22:20 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-07 12:32 [net-next 00/40][pull request] Intel Wired LAN Driver Update Jeff Kirsher
2011-06-07 12:32 ` [net-next 01/40] e1000e: disable far-end loopback mode on ESB2 Jeff Kirsher
2011-06-07 12:32 ` [net-next 02/40] e1000e: 82579 intermittently disabled during S0->Sx Jeff Kirsher
2011-06-07 12:32 ` [net-next 03/40] e1000e: log when swflag is cleared unexpectedly on ICH/PCH devices Jeff Kirsher
2011-06-07 12:32 ` [net-next 04/40] e1000e: do not schedule the Tx queue until ready Jeff Kirsher
2011-06-07 12:32 ` [net-next 05/40] e1000e: access multiple PHY registers on same page at the same time Jeff Kirsher
2011-06-07 12:32 ` [net-next 06/40] e1000e: Clear host wakeup bit on 82577/8 without touching PHY page 800 Jeff Kirsher
2011-06-07 12:32 ` [net-next 07/40] e1000e: remove redundant reverse dependency on CRC32 Jeff Kirsher
2011-06-07 12:32 ` [net-next 08/40] e1000e: update driver version Jeff Kirsher
2011-06-07 12:32 ` [net-next 09/40] igbvf: update version number Jeff Kirsher
2011-06-07 12:32 ` [net-next 10/40] igb: Change version to remove number after -k in kernel versions Jeff Kirsher
2011-06-07 12:32 ` [net-next 11/40] ixgbe: dcbnl reduce duplicated code and indentation Jeff Kirsher
2011-06-07 12:32 ` [net-next 12/40] ixgbe: consolidate packet buffer allocation Jeff Kirsher
2011-06-07 12:32 ` [net-next 13/40] ixgbe: consolidate MRQC and MTQC handling Jeff Kirsher
2011-06-07 12:32 ` [net-next 14/40] ixgbe: configure minimal packet buffers to support TC Jeff Kirsher
2011-06-07 12:32 ` [net-next 15/40] ixgbe: DCB use existing TX and RX queues Jeff Kirsher
2011-06-07 12:32 ` [net-next 16/40] ixgbe: DCB 82598 devices, tx_idx and rx_idx swapped Jeff Kirsher
2011-06-07 12:32 ` [net-next 17/40] ixgbe: setup redirection table for multiple packet buffers Jeff Kirsher
2011-06-07 12:32 ` [net-next 18/40] ixgbe: fix bit mask for DCB version Jeff Kirsher
2011-06-07 12:32 ` [net-next 19/40] ixgbe: DCB and perfect filters can coexist Jeff Kirsher
2011-06-07 12:32 ` [net-next 20/40] ixgbe: DCB, remove unneeded ixgbe_dcb_txq_to_tc() routine Jeff Kirsher
2011-06-07 12:32 ` [net-next 21/40] ixgbe: add support for Dell CEM Jeff Kirsher
2011-06-07 12:32 ` [net-next 22/40] ixgbe: setup per CPU PCI pool for FCoE DDP Jeff Kirsher
2011-06-07 12:32 ` [net-next 23/40] ixgbe: use per NUMA node lock " Jeff Kirsher
2011-06-07 12:32 ` [net-next 24/40] ixgbe: alloc DDP PCI pool and ixgbe queues as per NUMA nodes Jeff Kirsher
2011-06-07 12:58 ` Ben Hutchings
2011-06-14 0:14 ` Vasu Dev
2011-06-07 12:33 ` [net-next 25/40] ixgbe: remove ntuple filtering Jeff Kirsher
2011-06-07 12:33 ` [net-next 26/40] ixgbe: fix flags relating to perfect filters to support coexistence Jeff Kirsher
2011-06-07 12:33 ` [net-next 27/40] ixgbe: update perfect filter framework to support retaining filters Jeff Kirsher
2011-06-07 12:33 ` [net-next 28/40] ixgbe: add basic support for setting and getting nfc controls Jeff Kirsher
2011-06-07 12:33 ` [net-next 29/40] ixgbe: add support for displaying ntuple filters via the nfc interface Jeff Kirsher
2011-06-07 12:33 ` [net-next 30/40] ixgbe: add support for nfc addition and removal of filters Jeff Kirsher
2011-06-07 21:24 ` Ben Hutchings
2011-06-07 22:39 ` Alexander Duyck
2011-06-07 12:33 ` [net-next 31/40] ethtool: remove support for ETHTOOL_GRXNTUPLE Jeff Kirsher
2011-06-07 13:06 ` Ben Hutchings
2011-06-07 22:20 ` Alexander Duyck [this message]
2011-06-07 12:33 ` [net-next 32/40] ixgbe: add support for modifying UDP RSS flow hash options Jeff Kirsher
2011-06-07 12:33 ` [net-next 33/40] ixgbe: move setting RSC into a separate function Jeff Kirsher
2011-06-07 12:33 ` [net-next 34/40] ixgbe: move reset code " Jeff Kirsher
2011-06-07 12:33 ` [net-next 35/40] ixgbe: disable RSC when Rx checksum is off Jeff Kirsher
2011-06-07 12:33 ` [net-next 36/40] ixgbe: fix ring assignment issues for SR-IOV and drop cases Jeff Kirsher
2011-06-07 12:33 ` [net-next 37/40] rtnetlink: Compute and store minimum ifinfo dump size Jeff Kirsher
2011-06-08 6:09 ` Johannes Berg
2011-06-08 7:12 ` David Miller
2011-06-07 12:33 ` [net-next 38/40] ixgbe: Update feature flags so that LRO and Ntuple are restricted Jeff Kirsher
2011-06-07 13:15 ` Ben Hutchings
2011-06-07 22:32 ` Alexander Duyck
2011-06-07 12:33 ` [net-next 39/40] ixgbe: update driver version string Jeff Kirsher
2011-06-07 12:33 ` [net-next 40/40] ixgbevf: Update the driver string Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DEEA414.1010205@intel.com \
--to=alexander.h.duyck@intel.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).