From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Greear Subject: Re: [PATCH 1/2] igb: Allow extra 4 bytes on RX for vlan tags. Date: Wed, 20 Jul 2011 17:27:19 -0700 Message-ID: <4E277267.8090702@candelatech.com> References: <1297375149-18458-1-git-send-email-greearb@candelatech.com> <4D5D5AD8.5000802@candelatech.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: Jeff Kirsher , netdev@vger.kernel.org, "Duyck, Alexander H" To: Jesse Gross Return-path: Received: from mail.candelatech.com ([208.74.158.172]:60777 "EHLO ns3.lanforge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751699Ab1GUA1X (ORCPT ); Wed, 20 Jul 2011 20:27:23 -0400 In-Reply-To: Sender: netdev-owner@vger.kernel.org List-ID: On 07/20/2011 05:18 PM, Jesse Gross wrote: > On Thu, Feb 17, 2011 at 9:28 AM, Ben Greear wrote: >> On 02/17/2011 03:04 AM, Jeff Kirsher wrote: >>> >>> On Thu, Feb 10, 2011 at 13:59, wrote: >>>> >>>> From: Ben Greear >>>> >>>> This allows the NIC to receive 1518 byte (not counting >>>> FCS) packets when MTU is 1500, thus allowing 1500 MTU >>>> VLAN frames to be received. Please note that no VLANs >>>> were actually configured on the NIC...it was just acting >>>> as pass-through device. >>>> >>>> Signed-off-by: Ben Greear >>>> --- >>>> :100644 100644 58c665b... 30c9cc6... M drivers/net/igb/igb_main.c >>>> drivers/net/igb/igb_main.c | 5 +++-- >>>> 1 files changed, 3 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c >>>> index 58c665b..30c9cc6 100644 >>>> --- a/drivers/net/igb/igb_main.c >>>> +++ b/drivers/net/igb/igb_main.c >>>> @@ -2281,7 +2281,8 @@ static int __devinit igb_sw_init(struct igb_adapter >>>> *adapter) >>>> adapter->rx_itr_setting = IGB_DEFAULT_ITR; >>>> adapter->tx_itr_setting = IGB_DEFAULT_ITR; >>>> >>>> - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; >>>> + adapter->max_frame_size = (netdev->mtu + ETH_HLEN + ETH_FCS_LEN >>>> + + VLAN_HLEN); >>>> adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; >>>> >>>> spin_lock_init(&adapter->stats64_lock); >>>> @@ -4303,7 +4304,7 @@ static int igb_change_mtu(struct net_device >>>> *netdev, int new_mtu) >>>> { >>>> struct igb_adapter *adapter = netdev_priv(netdev); >>>> struct pci_dev *pdev = adapter->pdev; >>>> - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; >>>> + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; >>>> u32 rx_buffer_len, i; >>>> >>>> if ((new_mtu< 68) || (max_frame> MAX_JUMBO_FRAME_SIZE)) { >>> >>> While testing this patch, validation found that the patch reduces the >>> maximum mtu size >>> by 4 bytes (reduces it from 9216 to 9212). This is not a desired side >>> effect of this patch. >> >> You could add handling for that case and have it act as it used to when >> new_mtu is greater than 9212? >> >> I tested e1000e and it worked w/out hacking at 1500 MTU, so maybe >> check how it does it? > > I just wanted to bring this up again to see if any progress had been > made. We were looking at this driver and trying to figure out the > best way to convert it to use the new vlan model but I'm not familiar I've been watching :) > enough with the hardware to know. It seems that all of the other > Intel drivers unconditionally add space for the vlan tag to the > receive buffer (and would therefore have similar effects as this > patch), is there something different about this card? > > I believe that Alex was working on something in this area (in the > context of one of my patches from a long time ago) but I'm not sure > what came of that. Truth is, I don't really see why it's a problem to decrease the maximum MTU slightly in order to make it work with VLANs. I'm not sure if there is some way to make it work with VLANs and not decrease the maximum MTU. Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com