From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arvid Brodin Subject: Re: bridge: HSR support Date: Fri, 28 Oct 2011 18:36:24 +0200 Message-ID: <4EAADA08.10803@enea.com> References: <4E948A04.8060400@enea.com> <20111011112821.28cd3e51@nehalam.linuxnetplumber.net> <4E94D67A.9060207@enea.com> <4EA5738B.8080008@enea.com> <4EAACB7A.4090207@enea.com> <20111028175421.339b7c49@s6510.linuxnetplumber.net> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Cc: To: Stephen Hemminger Return-path: Received: from sestofw01.enea.se ([192.36.1.252]:31647 "HELO mx-3.enea.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with SMTP id S1752777Ab1J1Qg1 (ORCPT ); Fri, 28 Oct 2011 12:36:27 -0400 In-Reply-To: <20111028175421.339b7c49@s6510.linuxnetplumber.net> Sender: netdev-owner@vger.kernel.org List-ID: Stephen Hemminger wrote: > On Fri, 28 Oct 2011 17:34:18 +0200 > Arvid Brodin wrote: > >> Ok, so after a lot of reading and looking through code I have this idea of a >> standalone solution: >> >> 1) Add ioctls to create (and remove) "hsr" netdevs which encapsulates two >> physical Ethernet interfaces each (somewhat like the bridge code does, but >> with precisely 2 interfaces slaved). > > Please use the newer netlink interface and the master attribute for this > rather than inventing yet another ioctl. Ok, will do! Thanks! -- Arvid Brodin Enea Services Stockholm AB