netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Fastabend <john.r.fastabend@intel.com>
To: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>,
	"jesse@nicira.com" <jesse@nicira.com>,
	"hans.schillstrom@ericsson.com" <hans.schillstrom@ericsson.com>,
	"jpirko@redhat.com" <jpirko@redhat.com>,
	"mbizon@freebox.fr" <mbizon@freebox.fr>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"fubar@us.ibm.com" <fubar@us.ibm.com>
Subject: Re: [net-next PATCH] net: allow vlan traffic to be received under bond
Date: Fri, 28 Oct 2011 19:20:32 -0700	[thread overview]
Message-ID: <4EAB62F0.2040101@intel.com> (raw)
In-Reply-To: <1319799986.23112.101.camel@edumazet-laptop>

On 10/28/2011 4:06 AM, Eric Dumazet wrote:
> Le vendredi 28 octobre 2011 à 12:00 +0200, Eric Dumazet a écrit :
> 
>> Oh well, this broke my setup, a very basic one.
>>
>> eth1 and eth2 on a bonding device, bond0, active-backup
>>
>> some vlans on top of bond0, say vlan.103
>>
>> $ ip link show dev vlan.103
>> 8: vlan.103@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 100
>>     link/ether 00:1e:0b:ec:d3:d2 brd ff:ff:ff:ff:ff:ff
>>
>>
>> arp_rcv() now gets packets with skb->type PACKET_OTHERHOST and drops
>> such packets.
>>
>>      [000] 52870.115435: skb_gro_reset_offset <-napi_gro_receive
>>      [000] 52870.115435: dev_gro_receive <-napi_gro_receive
>>      [000] 52870.115435: napi_skb_finish <-napi_gro_receive
>>      [000] 52870.115435: netif_receive_skb <-napi_skb_finish
>>      [000] 52870.115435: get_rps_cpu <-netif_receive_skb
>>      [000] 52870.115435: __netif_receive_skb <-netif_receive_skb
>>      [000] 52870.115436: vlan_do_receive <-__netif_receive_skb
>>      [000] 52870.115436: bond_handle_frame <-__netif_receive_skb
>>      [000] 52870.115436: vlan_do_receive <-__netif_receive_skb
>>      [000] 52870.115436: arp_rcv <-__netif_receive_skb
>>      [000] 52870.115436: kfree_skb <-arp_rcv
>>      [000] 52870.115437: __kfree_skb <-kfree_skb
>>      [000] 52870.115437: skb_release_head_state <-__kfree_skb
>>      [000] 52870.115437: skb_release_data <-__kfree_skb
>>      [000] 52870.115437: kfree <-skb_release_data
>>      [000] 52870.115437: kmem_cache_free <-__kfree_skb
>>
>>
>> By the way, we have no SNMP counter here so I spent some time to track
>> this. I'll send a patch for this.
>>
>> If this host initiates the trafic, all is well.
>>
>> Please guys, can we get back ARP or revert this patch ?
> 
> Following patch cures the problem, I am not sure its the right fix.
> 
> Problem is we dont know how many times vlan_do_receive() can be called
> for a packet.
> 
> Only last call should set/mess pkt_type to PACKET_OTHERHOST.
> 
> So the caller should be responsible for this, not vlan_do_receive()
> 
> 
> Alternative would be to check skb->dev->rx_handler being NULL,
> but its not clean.
> 
> Following patch is a hack because it handles multicast/broadcast trafic
> only. Unicast is already handled in lines 26-33, this is why we didnt
> catch the problem.
> 
> diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
> index f1f2f7b..6861899 100644
> --- a/net/8021q/vlan_core.c
> +++ b/net/8021q/vlan_core.c
> @@ -13,7 +13,7 @@ bool vlan_do_receive(struct sk_buff **skbp)
>  
>  	vlan_dev = vlan_find_dev(skb->dev, vlan_id);
>  	if (!vlan_dev) {
> -		if (vlan_id)
> +		if (vlan_id && skb->pkt_type == PACKET_HOST)
>  			skb->pkt_type = PACKET_OTHERHOST;
>  		return false;
>  	}
> 

Thanks Eric! Thought about this some and I haven't come up
with anything better yet. Even though this might be a slight
hack I would prefer this to reverting the patch.

I'll think about this more tomorrow. Would you be against
submitting this patch?

.John

  reply	other threads:[~2011-10-29  2:20 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-10 19:16 [net-next PATCH] net: allow vlan traffic to be received under bond John Fastabend
2011-10-10 22:37 ` Jiri Pirko
2011-10-11  2:07   ` John Fastabend
2011-10-11  2:43     ` Jesse Gross
2011-10-11 11:08       ` Hans Schillstrom
2011-10-11 13:13         ` John Fastabend
2011-10-13 13:09           ` Hans Schillström
2011-10-11 13:16       ` John Fastabend
2011-10-11 10:57   ` Jiri Pirko
2011-10-13 15:04   ` Maxime Bizon
2011-10-13 15:38     ` Jiri Pirko
2011-10-13 15:48       ` Maxime Bizon
2011-10-13 15:59       ` Hans Schillström
2011-10-13 17:42         ` John Fastabend
2011-10-13 18:23           ` Hans Schillström
2011-10-14  0:22           ` Jesse Gross
2011-10-19  3:47             ` David Miller
2011-10-28 10:00               ` Eric Dumazet
2011-10-28 11:06                 ` Eric Dumazet
2011-10-29  2:20                   ` John Fastabend [this message]
2011-10-29 10:22                     ` Eric Dumazet
2011-10-29 14:59                       ` Jiri Pirko
2011-10-29 16:00                         ` Eric Dumazet
2011-10-29 16:13                           ` [PATCH v2] vlan: allow nested vlan_do_receive() Eric Dumazet
2011-10-29 16:28                             ` Jiri Pirko
2011-10-30  8:38                               ` Jiri Pirko
2011-10-30  8:44                                 ` David Miller
2011-10-30  8:44                                 ` Eric Dumazet
2011-10-29 16:16                           ` [net-next PATCH] net: allow vlan traffic to be received under bond Jiri Pirko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EAB62F0.2040101@intel.com \
    --to=john.r.fastabend@intel.com \
    --cc=davem@davemloft.net \
    --cc=eric.dumazet@gmail.com \
    --cc=fubar@us.ibm.com \
    --cc=hans.schillstrom@ericsson.com \
    --cc=jesse@nicira.com \
    --cc=jpirko@redhat.com \
    --cc=mbizon@freebox.fr \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).