From: Sergei Shtylyov <sshtylyov@mvista.com>
To: Joshua Kinard <kumba@gentoo.org>
Cc: netdev@vger.kernel.org, Linux MIPS List <linux-mips@linux-mips.org>
Subject: Re: [PATCH] net: meth: Add set_rx_mode hook to fix ICMPv6 neighbor discovery
Date: Sun, 18 Dec 2011 17:26:47 +0400 [thread overview]
Message-ID: <4EEDEA17.4040006@mvista.com> (raw)
In-Reply-To: <4EED3A3D.9080503@gentoo.org>
Hello.
On 18-12-2011 4:56, Joshua Kinard wrote:
> SGI IP32 (O2)'s ethernet driver (meth) lacks a set_rx_mode function, which
> prevents IPv6 from working completely because any ICMPv6 neighbor
> solicitation requests aren't picked up by the driver. So the machine can
> ping out and connect to other systems, but other systems will have a very
> hard time connecting to the O2.
> Signed-off-by: Joshua Kinard<kumba@gentoo.org>
> ---
Some minor nits below...
> drivers/net/ethernet/sgi/meth.c | 60 +++++++++++++++++++++++++++++++++++-----
> 1 file changed, 53 insertions(+), 7 deletions(-)
> --- a/drivers/net/ethernet/sgi/meth.c 2011-12-17 15:51:44.569166824 -0500
> +++ b/drivers/net/ethernet/sgi/meth.c 2011-12-17 15:51:20.259167050 -0500
[...]
> @@ -57,6 +58,12 @@ static const char *meth_str="SGI O2 Fast
> static int timeout = TX_TIMEOUT;
> module_param(timeout, int, 0);
>
> +/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
> + * MACE Ethernet uses a 64 element hash table based on the Ethernet CRC.
> + */
> +static int multicast_filter_limit = 32;
> +
> +
On empty oine would be enough...
> /*
> * This structure is private to each device. It is used to pass
> * packets in and out, so there is place for a packet
> @@ -765,15 +775,51 @@ static int meth_ioctl(struct net_device
> }
> }
>
> +static void meth_set_rx_mode(struct net_device *dev)
> +{
> + struct meth_private *priv = netdev_priv(dev);
> + unsigned long flags;
> +
> + netif_stop_queue(dev);
> + spin_lock_irqsave(&priv->meth_lock, flags);
> + priv->mac_ctrl&= ~(METH_PROMISC);
Parens not needed here.
> +
> + if (dev->flags & IFF_PROMISC) {
> + priv->mac_ctrl |= METH_PROMISC;
> + priv->mcast_filter = 0xffffffffffffffffUL;
> + mace->eth.mac_ctrl = priv->mac_ctrl;
> + mace->eth.mcast_filter = priv->mcast_filter;
> + } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
> + (dev->flags & IFF_ALLMULTI)) {
> + priv->mac_ctrl |= METH_ACCEPT_AMCAST;
> + priv->mcast_filter = 0xffffffffffffffffUL;
> + mace->eth.mac_ctrl = priv->mac_ctrl;
> + mace->eth.mcast_filter = priv->mcast_filter;
This block is over-indented.
> + } else {
> + struct netdev_hw_addr *ha;
> + priv->mac_ctrl |= METH_ACCEPT_MCAST;
> +
> + netdev_for_each_mc_addr(ha, dev)
> + set_bit((ether_crc(ETH_ALEN, ha->addr) >> 26),
> + (volatile long unsigned int *)&priv->mcast_filter);
> +
> + mace->eth.mcast_filter = priv->mcast_filter;
This last statement is common between all branches, so could be moved out
of *if*...
> + }
> +
> + spin_unlock_irqrestore(&priv->meth_lock, flags);
> + netif_wake_queue(dev);
> +}
> +
> static const struct net_device_ops meth_netdev_ops = {
> - .ndo_open = meth_open,
> - .ndo_stop = meth_release,
> - .ndo_start_xmit = meth_tx,
> - .ndo_do_ioctl = meth_ioctl,
> - .ndo_tx_timeout = meth_tx_timeout,
> - .ndo_change_mtu = eth_change_mtu,
> - .ndo_validate_addr = eth_validate_addr,
> + .ndo_open = meth_open,
> + .ndo_stop = meth_release,
> + .ndo_start_xmit = meth_tx,
> + .ndo_do_ioctl = meth_ioctl,
> + .ndo_tx_timeout = meth_tx_timeout,
> + .ndo_change_mtu = eth_change_mtu,
> + .ndo_validate_addr = eth_validate_addr,
> .ndo_set_mac_address = eth_mac_addr,
> + .ndo_set_rx_mode = meth_set_rx_mode,
The intializer values are not aligned now, and they were before the patch.
WBR, Sergei
next prev parent reply other threads:[~2011-12-18 13:27 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-18 0:56 [PATCH] net: meth: Add set_rx_mode hook to fix ICMPv6 neighbor discovery Joshua Kinard
2011-12-18 2:56 ` David Miller
2011-12-18 4:37 ` Joshua Kinard
2011-12-18 5:19 ` David Miller
2011-12-18 14:40 ` Joshua Kinard
2011-12-18 15:13 ` Joshua Kinard
2011-12-18 13:26 ` Sergei Shtylyov [this message]
2011-12-18 14:35 ` Joshua Kinard
2011-12-25 1:45 ` Joshua Kinard
2011-12-26 20:17 ` David Miller
2011-12-27 4:54 ` Joshua Kinard
2011-12-27 5:06 ` Joshua Kinard
2011-12-27 18:17 ` David Miller
2011-12-27 18:34 ` Stephen Hemminger
2011-12-27 18:52 ` David Miller
2011-12-27 21:29 ` Joshua Kinard
2011-12-27 22:34 ` Stephen Hemminger
2011-12-27 22:48 ` Joshua Kinard
2011-12-28 0:29 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EEDEA17.4040006@mvista.com \
--to=sshtylyov@mvista.com \
--cc=kumba@gentoo.org \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).