From: Marc Kleine-Budde <mkl@pengutronix.de>
To: info@essax.com
Cc: Wolfgang Grandegger <wg@grandegger.com>,
David Laight <David.Laight@ACULAB.COM>,
Oliver Hartkopp <socketcan@hartkopp.net>,
henrik@proconx.com, netdev@vger.kernel.org,
linux-can@vger.kernel.org, socketcan-users@lists.berlios.de,
IreneV <boir1@yandex.ru>,
Stanislav Yelenskiy <stanislavelensky@yahoo.com>,
oe@port.de, henrik@focus-sw.com
Subject: Re: [PATCH net-next v2 2/4] can: cc770: add legacy ISA bus driver for the CC770 and AN82527
Date: Tue, 10 Jan 2012 17:20:12 +0100 [thread overview]
Message-ID: <4F0C653C.3020902@pengutronix.de> (raw)
In-Reply-To: <4F0C63C6.5080305@essax.com>
[-- Attachment #1: Type: text/plain, Size: 2237 bytes --]
On 01/10/2012 05:13 PM, Wolfgang Zarre wrote:
> Hello Wolfgang,
>
>> On 01/10/2012 01:41 PM, Wolfgang Zarre wrote:
>>> Hello David,
>>>>
>>>>> cc770_isa_port_write_reg_indirect(const struct cc770_priv *priv,
>>>>> int reg, u8 val)
>>>>> {
>>>>> unsigned long base = (unsigned long)priv->reg_base;
>>>>> + unsigned long flags;
>>>>>
>>>>> + spin_lock_irqsave(&outb_lock, flags);
>>>>> outb(reg, base);
>>>>> outb(val, base + 1);
>>>>> + spin_unlock_irqrestore(&outb_lock, flags);
>>>>
>>>> Is there a 'read_reg_indirect' function??
>>>
>>> Yes, there is.
>>>
>>>> If so it also needs to use the same mutex.
>>>
>>> Actually, I don't think that we have a problem with mutex
>>> beside that it's using just one inb() statement but having
>>> for sure with an interrupt between both outb() statements which
>>> seems to be critical for the cc770.
>>
>> But the indirect read function also sets the address register before
>> reading the data using inb(). This sequence should also not be
>> interrupted and therefore we need to synchronize. For the indirect
>> access of the SJA1000 we also need to add spinlocks. Wonder why nobody
>> complained so far.
>
> So, if I understand correct that means that inb() can be interrupted
> between
> setting the address and reading. If this is the case then yes, we need
> spinlock if this is not the case then IMHO we wouldn't need or am I wrong?
If I understand correct, this function is the problem:
> static u8 cc770_isa_port_read_reg_indirect(const struct cc770_priv *priv,
> int reg)
> {
> unsigned long base = (unsigned long)priv->reg_base;
>
> outb(reg, base);
an interrupt can happen here, which does another indirect read or write
access, leaving "reg" pointing to the wrong register.
> return inb(base + 1);
> }
Mar
c
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2012-01-10 16:20 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-25 9:43 [PATCH net-next v2 0/4] can: cc770: add support for the Bosch CC770 and Intel AN82527 Wolfgang Grandegger
2011-11-25 9:43 ` [PATCH net-next v2 1/4] can: cc770: add driver core " Wolfgang Grandegger
[not found] ` <1322214204-1121-2-git-send-email-wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-11-26 15:11 ` Oliver Hartkopp
2011-11-28 11:28 ` [Socketcan-users] " Marc Kleine-Budde
2011-11-28 13:52 ` Wolfgang Grandegger
[not found] ` <4ED3922A.50704-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-11-28 14:01 ` Marc Kleine-Budde
2011-11-28 14:01 ` [Socketcan-users] " David Laight
[not found] ` <4ED3941D.3070302-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-11-28 14:10 ` Wolfgang Grandegger
[not found] ` <4ED3966E.7080609-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-11-28 14:18 ` Marc Kleine-Budde
[not found] ` <4ED3704D.5020903-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-11-29 9:20 ` Wolfgang Grandegger
2011-11-25 9:43 ` [PATCH net-next v2 2/4] can: cc770: add legacy ISA bus driver for the CC770 and AN82527 Wolfgang Grandegger
[not found] ` <1322214204-1121-3-git-send-email-wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-11-26 14:59 ` Oliver Hartkopp
2011-11-28 8:56 ` Wolfgang Zarre
2011-11-28 9:17 ` Wolfgang Grandegger
2011-11-28 12:03 ` Wolfgang Zarre
[not found] ` <4ED37885.8080909-PyqsHJVlJN8AvxtiuMwx3w@public.gmane.org>
2011-11-28 16:06 ` Oliver Hartkopp
[not found] ` <4ED3B198.2040308-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>
2011-11-29 9:16 ` Wolfgang Grandegger
[not found] ` <4ED4A2EC.40103-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-12-04 18:47 ` Wolfgang Zarre
2011-12-04 18:56 ` Wolfgang Grandegger
[not found] ` <4EDBC25D.50405-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-12-06 21:08 ` Wolfgang Zarre
[not found] ` <4EDE8435.5080100-PyqsHJVlJN8AvxtiuMwx3w@public.gmane.org>
2011-12-07 13:42 ` Wolfgang Grandegger
2011-12-09 10:26 ` Wolfgang Grandegger
2011-12-11 18:33 ` Wolfgang Zarre
[not found] ` <4EE4F76E.3000506-PyqsHJVlJN8AvxtiuMwx3w@public.gmane.org>
2011-12-12 9:23 ` Wolfgang Grandegger
[not found] ` <4EE5C824.2050704-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-12-12 11:18 ` Wolfgang Zarre
2011-12-12 11:55 ` Wolfgang Grandegger
[not found] ` <4EE5EBBF.6080007-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-12-21 18:32 ` Wolfgang Zarre
2011-12-22 9:37 ` Wolfgang Grandegger
[not found] ` <4EF2FA3F.3010308-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-12-22 13:20 ` Wolfgang Zarre
[not found] ` <4EF32E84.1080006-PyqsHJVlJN8AvxtiuMwx3w@public.gmane.org>
2011-12-31 9:39 ` Wolfgang Zarre
2012-01-04 13:10 ` Wolfgang Grandegger
2012-01-05 3:29 ` Wolfgang Zarre
[not found] ` <4F051927.8010600-PyqsHJVlJN8AvxtiuMwx3w@public.gmane.org>
2012-01-05 11:51 ` Wolfgang Grandegger
2012-01-05 12:00 ` David Laight
2012-01-09 21:47 ` Wolfgang Zarre
2012-01-09 23:11 ` Marc Kleine-Budde
2012-01-10 9:30 ` Wolfgang Grandegger
2012-01-10 12:30 ` Wolfgang Zarre
2012-01-10 14:20 ` Wolfgang Grandegger
2012-01-10 14:25 ` Wolfgang Grandegger
2012-01-11 9:00 ` Wolfgang Zarre
2012-01-11 9:37 ` David Laight
2012-01-11 14:37 ` Wolfgang Zarre
2012-01-11 9:38 ` Marc Kleine-Budde
2012-01-11 14:42 ` Wolfgang Zarre
2012-01-11 15:02 ` Marc Kleine-Budde
2012-01-10 10:00 ` David Laight
2012-01-10 12:41 ` Wolfgang Zarre
2012-01-10 14:43 ` Wolfgang Grandegger
2012-01-10 14:50 ` Oliver Hartkopp
2012-01-10 16:13 ` Wolfgang Zarre
2012-01-10 16:20 ` Marc Kleine-Budde [this message]
2012-01-10 16:23 ` Wolfgang Grandegger
2012-01-10 19:02 ` Wolfgang Zarre
2012-01-11 9:05 ` Wolfgang Zarre
2012-01-11 9:31 ` Marc Kleine-Budde
2012-01-10 11:41 ` Henrik Maier
2012-01-10 11:59 ` Wolfgang Grandegger
2012-01-10 12:43 ` Wolfgang Zarre
2011-11-28 12:09 ` Marc Kleine-Budde
[not found] ` <4ED379F3.1070206-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-11-28 13:59 ` Wolfgang Grandegger
2011-11-28 14:03 ` David Laight
[not found] ` <AE90C24D6B3A694183C094C60CF0A2F6D8AEE9-CgBM+Bx2aUAnGFn1LkZF6NBPR1lH4CV8@public.gmane.org>
2011-11-28 14:09 ` Marc Kleine-Budde
[not found] ` <4ED3960F.4040508-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-11-28 15:10 ` Wolfgang Grandegger
2011-11-25 9:43 ` [PATCH net-next v2 3/4] can: cc770: add platform " Wolfgang Grandegger
2011-11-25 9:43 ` [PATCH net-next v2 4/4] powerpc: tqm8548/tqm8xx: add and update CAN device nodes Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F0C653C.3020902@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=David.Laight@ACULAB.COM \
--cc=boir1@yandex.ru \
--cc=henrik@focus-sw.com \
--cc=henrik@proconx.com \
--cc=info@essax.com \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oe@port.de \
--cc=socketcan-users@lists.berlios.de \
--cc=socketcan@hartkopp.net \
--cc=stanislavelensky@yahoo.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).