netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Yan, Zheng" <zheng.z.yan@intel.com>
To: wwguy <wey-yi.w.guy@intel.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	Johannes Berg <johannes@sipsolutions.net>,
	ilw@linux.intel.com
Subject: Re: [PATCH V2] iwlwifi: add basic runtime PM support
Date: Wed, 11 Jan 2012 08:28:59 +0800	[thread overview]
Message-ID: <4F0CD7CB.1020902@intel.com> (raw)
In-Reply-To: <1326210089.25784.30.camel@wwguy-ubuntu>

On 01/10/2012 11:41 PM, wwguy wrote:
> On Tue, 2012-01-10 at 14:38 +0800, Yan, Zheng wrote:
>> This simple patch adds open/close based runtime PM support to the iwlwifi driver.
>> Namely, make the driver suspend the device after shutting down the interface and
>> resume the device when activating the interface. In my test, suspending the device
>> can save about 0.4 watt power. The shortcoming is that the device no longer generate
>> rfkill changes interrupt.
>>
>> Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
>> ---
>> Changes since v1:
>> Add module parameter to enable/disable runtime PM
>>
>>  drivers/net/wireless/iwlwifi/iwl-agn-lib.c |    1 +
>>  drivers/net/wireless/iwlwifi/iwl-agn.c     |   21 +++++++++++++++++++--
>>  drivers/net/wireless/iwlwifi/iwl-pci.c     |   22 +++++++++++++++++++++-
>>  drivers/net/wireless/iwlwifi/iwl-shared.h  |    1 +
>>  4 files changed, 42 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
>> index 1a52ed2..b9ac097 100644
>> --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
>> +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
>> @@ -164,6 +164,7 @@ struct iwl_mod_params iwlagn_mod_params = {
>>  	.bt_ch_announce = true,
>>  	.wanted_ucode_alternative = 1,
>>  	.auto_agg = true,
>> +	.runtime_pm = false,
> no need if it is "false"

Ok, I will update the patch.
> 
>>  	/* the rest are 0 by default */
>>  };
>>  
>> diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
>> index e0e9a3d..2d1f890a 100644
>> --- a/drivers/net/wireless/iwlwifi/iwl-agn.c
>> +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
>> @@ -38,6 +38,7 @@
>>  #include <linux/firmware.h>
>>  #include <linux/etherdevice.h>
>>  #include <linux/if_arp.h>
>> +#include <linux/pm_runtime.h>
>>  
>>  #include <net/mac80211.h>
>>  
>> @@ -1755,6 +1756,8 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
>>  	struct iwl_priv *priv = hw->priv;
>>  	int ret;
>>  
>> +	pm_runtime_get_sync(bus(priv)->dev);
>> +
>>  	IWL_DEBUG_MAC80211(priv, "enter\n");
>>  
>>  	/* we should be verifying the device is ready to be opened */
>> @@ -1762,7 +1765,7 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
>>  	ret = __iwl_up(priv);
>>  	mutex_unlock(&priv->shrd->mutex);
>>  	if (ret)
>> -		return ret;
>> +		goto out;
>>  
>>  	IWL_DEBUG_INFO(priv, "Start UP work done.\n");
>>  
>> @@ -1774,7 +1777,10 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
>>  
>>  	priv->is_open = 1;
>>  	IWL_DEBUG_MAC80211(priv, "leave\n");
>> -	return 0;
>> +	ret = 0;
>> +out:
>> +	pm_runtime_put(bus(priv)->dev);
>> +	return ret;
>>  }
>>  
>>  static void iwlagn_mac_stop(struct ieee80211_hw *hw)
>> @@ -1786,6 +1792,8 @@ static void iwlagn_mac_stop(struct ieee80211_hw *hw)
>>  	if (!priv->is_open)
>>  		return;
>>  
>> +	pm_runtime_get_sync(bus(priv)->dev);
>> +
>>  	priv->is_open = 0;
>>  
>>  	iwl_down(priv);
>> @@ -1798,6 +1806,8 @@ static void iwlagn_mac_stop(struct ieee80211_hw *hw)
>>  	iwl_enable_rfkill_int(priv);
>>  
>>  	IWL_DEBUG_MAC80211(priv, "leave\n");
>> +
>> +	pm_runtime_put(bus(priv)->dev);
>>  }
>>  
>>  #ifdef CONFIG_PM_SLEEP
>> @@ -3557,3 +3567,10 @@ module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust,
>>  MODULE_PARM_DESC(no_sleep_autoadjust,
>>  		 "don't automatically adjust sleep level "
>>  		 "according to maximum network latency (default: true)");
>> +
>> +module_param_named(runtime_pm, iwlagn_mod_params.runtime_pm, bool, S_IRUGO);
>> +MODULE_PARM_DESC(runtime_pm,
>> +		 "enable open/close based runtime power management, this "
>> +		 "feature can make HW rfkill unusable (default: disabled)");
>> +
>> +
>> diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
>> index 1800029..541f3e6 100644
>> --- a/drivers/net/wireless/iwlwifi/iwl-pci.c
>> +++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
>> @@ -63,6 +63,7 @@
>>  #include <linux/module.h>
>>  #include <linux/pci.h>
>>  #include <linux/pci-aspm.h>
>> +#include <linux/pm_runtime.h>
>>  
>>  #include "iwl-bus.h"
>>  #include "iwl-io.h"
>> @@ -465,6 +466,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>>  	err = iwl_probe(bus, &trans_ops_pcie, cfg);
>>  	if (err)
>>  		goto out_disable_msi;
>> +
>> +	pm_runtime_put_noidle(&pdev->dev);
>>  	return 0;
>>  
>>  out_disable_msi:
>> @@ -487,6 +490,8 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
>>  	struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus);
>>  	struct iwl_shared *shrd = bus->shrd;
>>  
>> +	pm_runtime_get_noresume(&pdev->dev);
>> +
>>  	iwl_remove(shrd->priv);
>>  
>>  	pci_disable_msi(pci_dev);
>> @@ -534,7 +539,22 @@ static int iwl_pci_resume(struct device *device)
>>  	return iwl_trans_resume(shrd->trans);
>>  }
>>  
>> -static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume);
>> +
>> +static int iwl_pci_runtime_idle(struct device *dev)
>> +{
>> +	struct pci_dev *pdev = to_pci_dev(dev);
>> +	struct iwl_bus *bus = pci_get_drvdata(pdev);
>> +	struct iwl_shared *shrd = bus->shrd;
>> +
>> +	if (iwlagn_mod_params.runtime_pm &&
>> +	    !test_bit(STATUS_ALIVE, &shrd->status))
>> +		return 0;
> checking for "Runtiem PM parameter enabled" and "uCode not loaded"? 
Yes. If idle function return -EBUSY, the runtime PM core will not suspend the device.

Regards
Yan, Zheng
>> +
>> +	return -EBUSY;
>> +}
>> +
>> +static UNIVERSAL_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend,
>> +			iwl_pci_resume, iwl_pci_runtime_idle);
>>  
>>  #define IWL_PM_OPS	(&iwl_dev_pm_ops)
>>  
>> diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h
>> index 14eaf37..a570e0d 100644
>> --- a/drivers/net/wireless/iwlwifi/iwl-shared.h
>> +++ b/drivers/net/wireless/iwlwifi/iwl-shared.h
>> @@ -152,6 +152,7 @@ struct iwl_mod_params {
>>  	bool bt_ch_announce;
>>  	int wanted_ucode_alternative;
>>  	bool auto_agg;
>> +	bool runtime_pm;
>>  };
>>  
>>  /**
> 
> 

  reply	other threads:[~2012-01-11  0:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-10  6:38 [PATCH V2] iwlwifi: add basic runtime PM support Yan, Zheng
2012-01-10 15:41 ` wwguy
2012-01-11  0:28   ` Yan, Zheng [this message]
2012-01-10 18:57 ` Dan Williams
2012-01-11  0:39   ` Yan, Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F0CD7CB.1020902@intel.com \
    --to=zheng.z.yan@intel.com \
    --cc=ilw@linux.intel.com \
    --cc=johannes@sipsolutions.net \
    --cc=netdev@vger.kernel.org \
    --cc=wey-yi.w.guy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).