* [PATCH] stmmac: Use correct MDIO bus name so that phy_connect() works again
@ 2012-01-26 14:46 Stefan Roese
2012-01-26 17:22 ` Florian Fainelli
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Roese @ 2012-01-26 14:46 UTC (permalink / raw)
To: netdev; +Cc: Florian Fainelli, Giuseppe Cavallaro
Patch db8857bf [stmmac: use an unique MDIO bus name.] changed the
MDIO bus name. After this phy_connect() fails. This patch changes
the bus name in stmmac_mdio.c so that the name matching works
again.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index da4a104..7319532 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -154,7 +154,7 @@ int stmmac_mdio_register(struct net_device *ndev)
else
irqlist = priv->mii_irq;
- new_bus->name = "STMMAC MII Bus";
+ new_bus->name = "stmmac";
new_bus->read = &stmmac_mdio_read;
new_bus->write = &stmmac_mdio_write;
new_bus->reset = &stmmac_mdio_reset;
--
1.7.8.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] stmmac: Use correct MDIO bus name so that phy_connect() works again
2012-01-26 14:46 [PATCH] stmmac: Use correct MDIO bus name so that phy_connect() works again Stefan Roese
@ 2012-01-26 17:22 ` Florian Fainelli
0 siblings, 0 replies; 2+ messages in thread
From: Florian Fainelli @ 2012-01-26 17:22 UTC (permalink / raw)
To: Stefan Roese; +Cc: netdev, Giuseppe Cavallaro
On 01/26/12 15:46, Stefan Roese wrote:
> Patch db8857bf [stmmac: use an unique MDIO bus name.] changed the
> MDIO bus name. After this phy_connect() fails. This patch changes
> the bus name in stmmac_mdio.c so that the name matching works
> again.
Alessandro already proposed such a patch:
http://patchwork.ozlabs.org/patch/137531/
which has been applied by David already.
>
> Signed-off-by: Stefan Roese<sr@denx.de>
> Cc: Florian Fainelli<florian@openwrt.org>
> Cc: Giuseppe Cavallaro<peppe.cavallaro@st.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index da4a104..7319532 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -154,7 +154,7 @@ int stmmac_mdio_register(struct net_device *ndev)
> else
> irqlist = priv->mii_irq;
>
> - new_bus->name = "STMMAC MII Bus";
> + new_bus->name = "stmmac";
> new_bus->read =&stmmac_mdio_read;
> new_bus->write =&stmmac_mdio_write;
> new_bus->reset =&stmmac_mdio_reset;
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-01-26 17:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-26 14:46 [PATCH] stmmac: Use correct MDIO bus name so that phy_connect() works again Stefan Roese
2012-01-26 17:22 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).