From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Greear Subject: Re: [PATCH 1/5] send-crc: Add framework to allow sending packets with customized CRC. Date: Wed, 08 Feb 2012 07:55:30 -0800 Message-ID: <4F329AF2.3010202@candelatech.com> References: <1328644182-7872-1-git-send-email-greearb@candelatech.com> <4F322C2C.1010708@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: Jeff Kirsher , netdev@vger.kernel.org To: jeffrey.t.kirsher@intel.com Return-path: Received: from mail.candelatech.com ([208.74.158.172]:51818 "EHLO ns3.lanforge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757157Ab2BHPzg (ORCPT ); Wed, 8 Feb 2012 10:55:36 -0500 In-Reply-To: <4F322C2C.1010708@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: On 02/08/2012 12:02 AM, Jeff Kirsher wrote: > On 02/07/2012 11:49 AM, greearb@candelatech.com wrote: >> From: Ben Greear >> >> This is useful for testing RX handling of frames with bad >> CRCs. >> >> Requires driver support to actually put the packet on the >> wire properly. >> >> Signed-off-by: Ben Greear > Ben- > > I tried to apply this series to Dave's net-next tree and I stopped after > the first two patches did not apply cleanly. > > What tree did you use to generate this patch series? I was using net-next from a few days ago...I'll rebase later today to make sure everything is up to date and re-post. Oh, that set is on top of the first two patches that enable rx-crc infrastructure and e100 support..that might be the issue. Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com