netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nick Jones <nick.jones@network-box.com>
To: netdev@vger.kernel.org
Subject: [PATCH net-next v2] ipv6: Allocate unique metrics for icmp6 packets to prevent tainting dst metrics
Date: Thu, 15 Mar 2012 23:41:57 +0800	[thread overview]
Message-ID: <4F620DC5.7080607@network-box.com> (raw)

The generation of an icmp6 packet, targeted to a specific desination
address, will cause the shared metrics of the ip6_dst and inetpeer
of that address to be tainted with the hoplimit value 255.
All subsequent packets to the dst, will have this hoplimit value, and
if the destination is a router, not even advertisements specifying a
new hoplimit value will have any effect reverting this due to the way
ip6_dst_hoplimit works.

By allocating a unique metrics array for the icmp6 packet, the shared
metrics will not be tainted.  A ip6_dst flag is added to indicate that
the metrics for the dst don't belong to the peer, thus are not unique
and should be freed when the dst is destroyed.

Signed-off-by: Nick Jones <nick.jones@network-box.com>
---

v2: Take care of destroy side, that was neglected in the previous
    version, by setting a flag on the dst to indicate its metrics are
    unique, thus should be destroyed along with the dst.

 include/net/dst.h |    1 +
 net/ipv6/route.c  |   12 ++++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/include/net/dst.h b/include/net/dst.h
index 344c8dd..ee7a781 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -54,6 +54,7 @@ struct dst_entry {
 #define DST_NOCACHE		0x0010
 #define DST_NOCOUNT		0x0020
 #define DST_NOPEER		0x0040
+#define DST_NOPEERMETRICS	0x0080

 	short			error;
 	short			obsolete;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 92be12b..f0a1839 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -278,7 +278,7 @@ static void ip6_dst_destroy(struct dst_entry *dst)
 	struct inet6_dev *idev = rt->rt6i_idev;
 	struct inet_peer *peer = rt->rt6i_peer;

-	if (!(rt->dst.flags & DST_HOST))
+	if (!(rt->dst.flags & DST_HOST) || (rt->dst.flags & DST_NOPEERMETRICS))
 		dst_destroy_metrics_generic(dst);

 	if (idev) {
@@ -1110,13 +1110,21 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
 		}
 	}

-	rt->dst.flags |= DST_HOST;
+	rt->dst.flags |= (DST_HOST | DST_NOPEERMETRICS);
 	rt->dst.output  = ip6_output;
 	dst_set_neighbour(&rt->dst, neigh);
 	atomic_set(&rt->dst.__refcnt, 1);
 	rt->rt6i_dst.addr = fl6->daddr;
 	rt->rt6i_dst.plen = 128;
 	rt->rt6i_idev     = idev;
+
+	u32 *metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_ATOMIC);
+	if (unlikely(!metrics)) {
+		in6_dev_put(idev);
+		dst_free(&rt->dst);
+		return ERR_CAST(-ENOMEM);
+	}
+	dst_init_metrics(&rt->dst, metrics, 0);
 	dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);

 	spin_lock_bh(&icmp6_dst_lock);
-- 
1.7.1

             reply	other threads:[~2012-03-15 15:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-15 15:41 Nick Jones [this message]
2012-03-17  6:02 ` [PATCH net-next v2] ipv6: Allocate unique metrics for icmp6 packets to prevent tainting dst metrics David Miller
2012-03-17 15:47   ` [PATCH net-next v3] " Nick Jones
2012-03-17 16:36     ` Eric Dumazet
2012-03-17 17:43       ` [PATCH net-next v4] " Nick Jones
2012-03-19 22:04         ` David Miller
2012-03-20  5:48           ` Nick Jones
2012-03-20  7:10             ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F620DC5.7080607@network-box.com \
    --to=nick.jones@network-box.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).