netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Fastabend <john.r.fastabend@intel.com>
To: Amir Vadai <amirv@mellanox.com>, Or Gerlitz <or.gerlitz@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org, Roland Dreier <roland@purestorage.com>,
	Yevgeny Petrilin <yevgenyp@mellanox.com>,
	Oren Duer <oren@mellanox.com>,
	Amir Vadai <amirv@dev.mellanox.co.il>
Subject: Re: [PATCH net-next V6 7/8] net/dcb: Add an optional max rate attribute
Date: Wed, 04 Apr 2012 17:23:58 -0700	[thread overview]
Message-ID: <4F7CE61E.7060406@intel.com> (raw)
In-Reply-To: <1333537084-9186-8-git-send-email-amirv@mellanox.com>

On 4/4/2012 3:58 AM, Amir Vadai wrote:
> Although not specified in 8021Qaz spec, it could be useful to enable drivers
> whose HW supports setting a rate limit for an ETS TC. This patch adds this
> optional attribute to DCB netlink. To use it, drivers should implement and
> register the callbacks ieee_setmaxrate and ieee_getmaxrate. The units are 64
> bits long and specified in Kbps to enable usage over both slow and very fast
> networks.
> 
> Signed-off-by: Amir Vadai <amirv@mellanox.com>
> ---

Or, Amir,

Two more comments inline really just minor nit picks but if your going
to roll new patch mind as well. I'll ack a patch with these changes.

>  include/linux/dcbnl.h |    5 +++++
>  include/net/dcbnl.h   |    2 ++
>  net/dcb/dcbnl.c       |   21 +++++++++++++++++++++
>  3 files changed, 28 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
> index 65a2562..ec8e372 100644
> --- a/include/linux/dcbnl.h
> +++ b/include/linux/dcbnl.h
> @@ -67,6 +67,10 @@ struct ieee_ets {
>  	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
>  };
>  

annotate ieee_maxrate so implementers use it correctly per previous note.

> +struct ieee_maxrate {
> +	__u64	tc_maxrate[IEEE_8021QAZ_MAX_TCS];
> +};
> +
>  /* This structure contains the IEEE 802.1Qaz PFC managed object
>   *
>   * @pfc_cap: Indicates the number of traffic classes on the local device
> @@ -321,6 +325,7 @@ enum ieee_attrs {
>  	DCB_ATTR_IEEE_PEER_ETS,
>  	DCB_ATTR_IEEE_PEER_PFC,
>  	DCB_ATTR_IEEE_PEER_APP,
> +	DCB_ATTR_IEEE_MAXRATE,
>  	__DCB_ATTR_IEEE_MAX
>  };
>  #define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
> diff --git a/include/net/dcbnl.h b/include/net/dcbnl.h
> index f55c980..fc5d5dc 100644
> --- a/include/net/dcbnl.h
> +++ b/include/net/dcbnl.h
> @@ -48,6 +48,8 @@ struct dcbnl_rtnl_ops {
>  	/* IEEE 802.1Qaz std */
>  	int (*ieee_getets) (struct net_device *, struct ieee_ets *);
>  	int (*ieee_setets) (struct net_device *, struct ieee_ets *);
> +	int (*ieee_getmaxrate) (struct net_device *, struct ieee_maxrate *);
> +	int (*ieee_setmaxrate) (struct net_device *, struct ieee_maxrate *);
>  	int (*ieee_getpfc) (struct net_device *, struct ieee_pfc *);
>  	int (*ieee_setpfc) (struct net_device *, struct ieee_pfc *);
>  	int (*ieee_getapp) (struct net_device *, struct dcb_app *);
> diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
> index 36f37af..d3df048 100644
> --- a/net/dcb/dcbnl.c
> +++ b/net/dcb/dcbnl.c
> @@ -178,6 +178,8 @@ static const struct nla_policy dcbnl_ieee_policy[DCB_ATTR_IEEE_MAX + 1] = {
>  	[DCB_ATTR_IEEE_ETS]	    = {.len = sizeof(struct ieee_ets)},
>  	[DCB_ATTR_IEEE_PFC]	    = {.len = sizeof(struct ieee_pfc)},
>  	[DCB_ATTR_IEEE_APP_TABLE]   = {.type = NLA_NESTED},
> +	[DCB_ATTR_IEEE_MAXRATE]   = {.len = sizeof(struct ieee_maxrate)},
> +

spurious newline remove it

>  };
>  
>  static const struct nla_policy dcbnl_ieee_app[DCB_ATTR_IEEE_APP_MAX + 1] = {
> @@ -1246,6 +1248,17 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
>  			goto nla_put_failure;
>  	}
>  
> +	if (ops->ieee_getmaxrate) {
> +		struct ieee_maxrate maxrate;
> +		err = ops->ieee_getmaxrate(netdev, &maxrate);
> +		if (!err) {
> +			err = nla_put(skb, DCB_ATTR_IEEE_MAXRATE,
> +					sizeof(maxrate), &maxrate);

align sizeof with skb

Thanks,
John

  parent reply	other threads:[~2012-04-05  0:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-04 10:57 [PATCH net-next V6 0/8] net/mlx4_en: DCB QoS support Amir Vadai
2012-04-04 10:57 ` [PATCH net-next V6 1/8] net/mlx4_en: Force user priority by QP attribute Amir Vadai
2012-04-04 10:57 ` [PATCH net-next V6 2/8] net/mlx4_core: set port QoS attributes Amir Vadai
2012-04-04 10:57 ` [PATCH net-next V6 3/8] net/mlx4_en: DCB QoS support Amir Vadai
2012-04-04 10:58 ` [PATCH net-next V6 4/8] net/mlx4_en: sk_prio <=> UP for untagged traffic Amir Vadai
2012-04-04 10:58 ` [PATCH net-next V6 5/8] net/route: export symbol ip_tos2prio Amir Vadai
2012-04-04 10:58 ` [PATCH net-next V6 6/8] IB/rdma_cm: TOS <=> UP mapping for IBoE Amir Vadai
2012-04-04 10:58 ` [PATCH net-next V6 7/8] net/dcb: Add an optional max rate attribute Amir Vadai
2012-04-04 15:48   ` John Fastabend
2012-04-04 21:56     ` Or Gerlitz
2012-04-04 22:27       ` Or Gerlitz
2012-04-04 22:28         ` David Miller
2012-04-04 22:30           ` Or Gerlitz
2012-04-05  0:23   ` John Fastabend [this message]
2012-04-05  0:39     ` Dave Taht
2012-04-04 10:58 ` [PATCH net-next V6 8/8] net/mlx4_en: Set max rate-limit for a TC Amir Vadai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F7CE61E.7060406@intel.com \
    --to=john.r.fastabend@intel.com \
    --cc=amirv@dev.mellanox.co.il \
    --cc=amirv@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=or.gerlitz@gmail.com \
    --cc=oren@mellanox.com \
    --cc=roland@purestorage.com \
    --cc=yevgenyp@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).