From: Oliver Hartkopp <socketcan@hartkopp.net>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>
Cc: Axel Lin <axel.lin@gmail.com>,
netdev@vger.kernel.org, Wolfgang Grandegger <wg@grandegger.com>,
linux-can@vger.kernel.org
Subject: Re: [PATCH 1/3] net/can: use module_pci_driver
Date: Mon, 16 Apr 2012 20:54:52 +0200 [thread overview]
Message-ID: <4F8C6AFC.30601@hartkopp.net> (raw)
In-Reply-To: <1334378323.2862.1.camel@phoenix>
Hello Dave,
i've seen that you applied the two pci simplifications from Axel Lin to the
net-next tree
http://patchwork.ozlabs.org/patch/152473/
http://patchwork.ozlabs.org/patch/152474/
... but only this one is marked 'awaiting upstream' ?
http://patchwork.ozlabs.org/patch/152472/
What does this mean? Should Marc process this patch separately via his
can-next tree?
Regards,
Oliver
On 14.04.2012 06:38, Axel Lin wrote:
> This patch converts the drivers in drivers/net/can/* to use
> module_pci_driver() macro which makes the code smaller and a bit simpler.
>
> Signed-off-by: Axel Lin <axel.lin@gmail.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: linux-can@vger.kernel.org
> ---
> drivers/net/can/pch_can.c | 12 +-----------
> drivers/net/can/sja1000/ems_pci.c | 14 +-------------
> drivers/net/can/sja1000/kvaser_pci.c | 13 +------------
> drivers/net/can/sja1000/peak_pci.c | 12 +-----------
> drivers/net/can/sja1000/plx_pci.c | 13 +------------
> 5 files changed, 5 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
> index 2bb215e..1226297 100644
> --- a/drivers/net/can/pch_can.c
> +++ b/drivers/net/can/pch_can.c
> @@ -1274,17 +1274,7 @@ static struct pci_driver pch_can_pci_driver = {
> .resume = pch_can_resume,
> };
>
> -static int __init pch_can_pci_init(void)
> -{
> - return pci_register_driver(&pch_can_pci_driver);
> -}
> -module_init(pch_can_pci_init);
> -
> -static void __exit pch_can_pci_exit(void)
> -{
> - pci_unregister_driver(&pch_can_pci_driver);
> -}
> -module_exit(pch_can_pci_exit);
> +module_pci_driver(pch_can_pci_driver);
>
> MODULE_DESCRIPTION("Intel EG20T PCH CAN(Controller Area Network) Driver");
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
> index 36f4f97..5c6d412 100644
> --- a/drivers/net/can/sja1000/ems_pci.c
> +++ b/drivers/net/can/sja1000/ems_pci.c
> @@ -371,16 +371,4 @@ static struct pci_driver ems_pci_driver = {
> .remove = ems_pci_del_card,
> };
>
> -static int __init ems_pci_init(void)
> -{
> - return pci_register_driver(&ems_pci_driver);
> -}
> -
> -static void __exit ems_pci_exit(void)
> -{
> - pci_unregister_driver(&ems_pci_driver);
> -}
> -
> -module_init(ems_pci_init);
> -module_exit(ems_pci_exit);
> -
> +module_pci_driver(ems_pci_driver);
> diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
> index ed004ce..23ed6ea 100644
> --- a/drivers/net/can/sja1000/kvaser_pci.c
> +++ b/drivers/net/can/sja1000/kvaser_pci.c
> @@ -397,15 +397,4 @@ static struct pci_driver kvaser_pci_driver = {
> .remove = __devexit_p(kvaser_pci_remove_one),
> };
>
> -static int __init kvaser_pci_init(void)
> -{
> - return pci_register_driver(&kvaser_pci_driver);
> -}
> -
> -static void __exit kvaser_pci_exit(void)
> -{
> - pci_unregister_driver(&kvaser_pci_driver);
> -}
> -
> -module_init(kvaser_pci_init);
> -module_exit(kvaser_pci_exit);
> +module_pci_driver(kvaser_pci_driver);
> diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
> index 5f92b86..f0a1296 100644
> --- a/drivers/net/can/sja1000/peak_pci.c
> +++ b/drivers/net/can/sja1000/peak_pci.c
> @@ -749,14 +749,4 @@ static struct pci_driver peak_pci_driver = {
> .remove = __devexit_p(peak_pci_remove),
> };
>
> -static int __init peak_pci_init(void)
> -{
> - return pci_register_driver(&peak_pci_driver);
> -}
> -module_init(peak_pci_init);
> -
> -static void __exit peak_pci_exit(void)
> -{
> - pci_unregister_driver(&peak_pci_driver);
> -}
> -module_exit(peak_pci_exit);
> +module_pci_driver(peak_pci_driver);
> diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
> index a227586..8bc9598 100644
> --- a/drivers/net/can/sja1000/plx_pci.c
> +++ b/drivers/net/can/sja1000/plx_pci.c
> @@ -609,15 +609,4 @@ static struct pci_driver plx_pci_driver = {
> .remove = plx_pci_del_card,
> };
>
> -static int __init plx_pci_init(void)
> -{
> - return pci_register_driver(&plx_pci_driver);
> -}
> -
> -static void __exit plx_pci_exit(void)
> -{
> - pci_unregister_driver(&plx_pci_driver);
> -}
> -
> -module_init(plx_pci_init);
> -module_exit(plx_pci_exit);
> +module_pci_driver(plx_pci_driver);
next prev parent reply other threads:[~2012-04-16 18:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-14 4:38 [PATCH 1/3] net/can: use module_pci_driver Axel Lin
2012-04-14 4:40 ` [PATCH 2/3] net/tokenring: " Axel Lin
2012-04-14 19:20 ` David Miller
2012-04-14 4:41 ` [PATCH 3/3] net/wan: " Axel Lin
2012-04-14 19:20 ` David Miller
2012-04-16 18:54 ` Oliver Hartkopp [this message]
2012-04-16 18:57 ` [PATCH 1/3] net/can: " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F8C6AFC.30601@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=axel.lin@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).