From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-15?Q?Niccol=F2_Belli?= Subject: sky2 still badly broken Date: Fri, 27 Apr 2012 22:15:10 +0200 Message-ID: <4F9AFE4E.8010108@linuxsystems.it> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE To: netdev@vger.kernel.org Return-path: Received: from mail.linuxsystems.it ([2.119.245.41]:54052 "EHLO mail.linuxsystems.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759754Ab2D0UYg (ORCPT ); Fri, 27 Apr 2012 16:24:36 -0400 Received: from [192.168.2.8] (unknown [192.168.2.8]) by mail.linuxsystems.it (Postfix) with ESMTPSA id 15591141B8 for ; Fri, 27 Apr 2012 22:14:18 +0200 (CEST) Sender: netdev-owner@vger.kernel.org List-ID: dmesg is full of [ 1464.914044] sky2 0000:06:00.0: eth0: rx error, status 0x5220002=20 length 1314 [ 1465.005628] sky2 0000:06:00.0: eth0: rx error, status 0x7ffc0001=20 length 532 [ 1465.204459] sky2 0000:06:00.0: eth0: rx error, status 0x7ffc0001=20 length 532 [ 1465.825909] sky2 0000:06:00.0: eth0: rx error, status 0x7ffc0001=20 length 532 [ 1468.715858] net_ratelimit: 3 callbacks suppressed [ 1468.715865] sky2 0000:06:00.0: eth0: rx error, status 0x7ffc0001=20 length 532 dhcp does not work (after a few minutes it does not renew the ip) while under heavy load the card resets and I have to unload and reload=20 the module also transfer rate is VERY low. lowering the mtu does help a bit, but it doesn't make miracles... kernel 3.4.0-rc4 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-= E=20 Gigabit Ethernet Controller (rev 13) http://forums.gentoo.org/viewtopic-t-487018-start-0-postdays-0-postorde= r-asc-highlight-.html Thanks, Niccol=F2