From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Yuval Mintz <yuvalmin@broadcom.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, eilong@broadcom.com
Subject: Re: [net-next PATCH 1/3] Added kernel support in EEE Ethtool commands
Date: Tue, 05 Jun 2012 10:00:58 +0200 [thread overview]
Message-ID: <4FCDBCBA.8040306@st.com> (raw)
In-Reply-To: <1338878342-24586-2-git-send-email-yuvalmin@broadcom.com>
Hello Yuval,
On 6/5/2012 8:39 AM, Yuval Mintz wrote:
> This patch extends the kernel's ethtool interface by adding support
> for 2 new EEE commands - get_eee and set_eee.
>
> Thanks goes to Giuseppe Cavallaro for his original patch adding this support.
Thank to you for having re-worked/re-stored the code I had proposed and
sorry if I was not able to post my patches in time.
Indeed, I had already done some progresses on EEE so I could re-base it
against your work as soon as reviewed.
For example, I could especially contribute on the eee get/set for the
PHY part. I had already sent the patches for phy_device.c (Ben's already
helped me on these) and I am happy to rework them.
Then I could test and verify all (ethtool + phy + user-space
application) with the stmmac d.d. on my platforms.
[snip]
> + __u32 tx_lpi_enabled;
> + __u32 tx_lpi_timer;
Is the tx_lpi_timer field for the MAC driver as we discussed in the
past? If yes, so I can use it for the stmmac too.
Peppe
> + __u32 reserved[2];
> +};
> +
> /**
> * struct ethtool_modinfo - plugin module eeprom information
> * @cmd: %ETHTOOL_GMODULEINFO
> @@ -945,6 +958,8 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
> * @get_module_info: Get the size and type of the eeprom contained within
> * a plug-in module.
> * @get_module_eeprom: Get the eeprom information from the plug-in module
> + * @get_eee: Get Energy-Efficient (EEE) supported and status.
> + * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
> *
> * All operations are optional (i.e. the function pointer may be set
> * to %NULL) and callers must take this into account. Callers must
> @@ -1011,6 +1026,8 @@ struct ethtool_ops {
> struct ethtool_modinfo *);
> int (*get_module_eeprom)(struct net_device *,
> struct ethtool_eeprom *, u8 *);
> + int (*get_eee)(struct net_device *, struct ethtool_eee *);
> + int (*set_eee)(struct net_device *, struct ethtool_eee *);
>
>
> };
> @@ -1089,6 +1106,8 @@ struct ethtool_ops {
> #define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
> #define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
> #define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
> +#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
> +#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
>
> /* compatibility with older code */
> #define SPARC_ETH_GSET ETHTOOL_GSET
> diff --git a/net/core/ethtool.c b/net/core/ethtool.c
> index 9c2afb4..7940bd3 100644
> --- a/net/core/ethtool.c
> +++ b/net/core/ethtool.c
> @@ -729,6 +729,34 @@ static int ethtool_set_wol(struct net_device *dev, char __user *useraddr)
> return dev->ethtool_ops->set_wol(dev, &wol);
> }
>
> +static int ethtool_get_eee(struct net_device *dev, char __user *useraddr)
> +{
> + struct ethtool_eee edata;
> +
> + if (!dev->ethtool_ops->get_eee)
> + return -EOPNOTSUPP;
> +
> + dev->ethtool_ops->get_eee(dev, &edata);
> +
> + if (copy_to_user(useraddr, &edata, sizeof(edata)))
> + return -EFAULT;
> +
> + return 0;
> +}
> +
> +static int ethtool_set_eee(struct net_device *dev, char __user *useraddr)
> +{
> + struct ethtool_eee edata;
> +
> + if (!dev->ethtool_ops->get_eee)
> + return -EOPNOTSUPP;
> +
> + if (copy_from_user(&edata, useraddr, sizeof(edata)))
> + return -EFAULT;
> +
> + return dev->ethtool_ops->set_eee(dev, &edata);
> +}
> +
> static int ethtool_nway_reset(struct net_device *dev)
> {
> if (!dev->ethtool_ops->nway_reset)
> @@ -1471,6 +1499,12 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
> rc = ethtool_set_value_void(dev, useraddr,
> dev->ethtool_ops->set_msglevel);
> break;
> + case ETHTOOL_GEEE:
> + rc = ethtool_get_eee(dev, useraddr);
> + break;
> + case ETHTOOL_SEEE:
> + rc = ethtool_set_eee(dev, useraddr);
> + break;
> case ETHTOOL_NWAY_RST:
> rc = ethtool_nway_reset(dev);
> break;
next prev parent reply other threads:[~2012-06-05 8:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-05 6:38 [net-next PATCH 0/3] Energy Efficient Ethernet (eee) support Yuval Mintz
2012-06-05 6:39 ` [net-next PATCH 1/3] Added kernel support in EEE Ethtool commands Yuval Mintz
2012-06-05 8:00 ` Giuseppe CAVALLARO [this message]
2012-06-05 8:11 ` Yuval Mintz
2012-06-05 8:16 ` Giuseppe CAVALLARO
2012-06-05 19:01 ` Ben Hutchings
2012-06-05 6:39 ` [net-next PATCH 2/3] bnx2x: Added EEE support Yuval Mintz
2012-06-05 6:39 ` [net-next PATCH 3/3] bnx2x: Added EEE Ethtool support Yuval Mintz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FCDBCBA.8040306@st.com \
--to=peppe.cavallaro@st.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=yuvalmin@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).