From: Joe Jin <joe.jin@oracle.com>
To: "Dave, Tushar N" <tushar.n.dave@intel.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"e1000-devel@lists.sf.net" <e1000-devel@lists.sf.net>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: 82571EB: Detected Hardware Unit Hang
Date: Thu, 12 Jul 2012 14:16:25 +0800 [thread overview]
Message-ID: <4FFE6BB9.4060106@oracle.com> (raw)
In-Reply-To: <061C8A8601E8EE4CA8D8FD6990CEA891274F02D7@ORSMSX102.amr.corp.intel.com>
On 07/12/12 13:57, Dave, Tushar N wrote:
>> -----Original Message-----
>> From: Joe Jin [mailto:joe.jin@oracle.com]
>> Sent: Wednesday, July 11, 2012 8:13 PM
>> To: Dave, Tushar N
>> Cc: e1000-devel@lists.sf.net; netdev@vger.kernel.org; linux-
>> kernel@vger.kernel.org
>> Subject: Re: 82571EB: Detected Hardware Unit Hang
>>
>> On 07/12/12 11:07, Dave, Tushar N wrote:
>>>> -----Original Message-----
>>>> From: Joe Jin [mailto:joe.jin@oracle.com]
>>>> Sent: Wednesday, July 11, 2012 7:58 PM
>>>> To: Dave, Tushar N
>>>> Cc: e1000-devel@lists.sf.net; netdev@vger.kernel.org; linux-
>>>> kernel@vger.kernel.org
>>>> Subject: Re: 82571EB: Detected Hardware Unit Hang
>>>>
>>>> On 07/12/12 10:52, Dave, Tushar N wrote:
>>>>> What is the exact error messages in BIOS log?
>>>>
>>>> Error message from BIOS event log:
>>>> 07/12/12 05:54:00
>>>> PCI Express Non-Fatal Error
>>>>
>>>> Thanks,
>>>> Joe
>> Hi Tushar,
>>
>> Please find eeprom from attachment.
>
> Do you have lspci -vvv dump of entire system before and after issue occurs? If you have can you send it to me?
>
Before:
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 80
Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbdc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=32]
Expansion ROM at fbda0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee33000 Data: 407c
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 12, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
Kernel driver in use: e1000e
Kernel modules: e1000e
After:
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 80
Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbdc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=32]
Expansion ROM at fbda0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee33000 Data: 407c
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr+ UnsuppReq+ AuxPwr+ TransPend+
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 12, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
Kernel driver in use: e1000e
Kernel modules: e1000e
Different of them:
Before: DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
After DevSta: CorrErr- UncorrErr+ FatalErr+ UnsuppReq+ AuxPwr+ TransPend+
Thanks,
Joe
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
next prev parent reply other threads:[~2012-07-12 6:16 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-09 8:51 82571EB: Detected Hardware Unit Hang Joe Jin
2012-07-09 9:21 ` Eric Dumazet
2012-07-09 12:19 ` Joe Jin
2012-07-10 7:40 ` Joe Jin
2012-07-10 18:14 ` Wyborny, Carolyn
2012-07-10 19:02 ` Dave, Tushar N
2012-07-10 19:17 ` Dave, Tushar N
2012-07-11 0:34 ` Joe Jin
2012-07-11 1:18 ` Dave, Tushar N
2012-07-11 1:44 ` Joe Jin
2012-07-11 3:22 ` Dave, Tushar N
2012-07-11 3:29 ` Joe Jin
2012-07-11 4:05 ` Dave, Tushar N
2012-07-11 5:03 ` Joe Jin
2012-07-11 7:11 ` Dave, Tushar N
2012-07-11 7:17 ` Joe Jin
2012-07-11 7:37 ` Dave, Tushar N
2012-07-11 7:38 ` Joe Jin
2012-07-11 7:50 ` Dave, Tushar N
2012-07-11 7:53 ` Joe Jin
2012-07-11 18:51 ` Dave, Tushar N
2012-07-12 2:23 ` Joe Jin
2012-07-12 2:52 ` Dave, Tushar N
2012-07-12 2:57 ` Joe Jin
2012-07-12 3:07 ` Dave, Tushar N
2012-07-12 3:12 ` Joe Jin
2012-07-12 5:57 ` Dave, Tushar N
2012-07-12 6:16 ` Joe Jin [this message]
2012-07-12 6:41 ` Dave, Tushar N
2012-07-12 7:10 ` Joe Jin
2012-07-12 18:19 ` Dave, Tushar N
2012-07-12 23:46 ` Joe Jin
2012-07-13 4:10 ` Dave, Tushar N
2012-07-13 4:33 ` Joe Jin
2012-07-15 3:42 ` Dave, Tushar N
2012-07-15 3:52 ` Joe Jin
2012-07-15 13:35 ` Henrique de Moraes Holschuh
2012-07-16 15:47 ` Ben Hutchings
2012-07-16 16:08 ` Henrique de Moraes Holschuh
2012-07-17 4:48 ` Jon Mason
2012-07-17 4:45 ` Jon Mason
-- strict thread matches above, loose matches on Subject: below --
2012-11-08 6:24 Joe Jin
2012-11-08 20:35 ` Dave, Tushar N
2012-11-09 1:22 ` Joe Jin
2012-11-14 2:47 ` Joe Jin
2012-11-14 3:45 ` Dave, Tushar N
2012-11-15 0:32 ` Joe Jin
2012-11-15 20:26 ` Dave, Tushar N
2012-11-19 5:38 ` Joe Jin
2012-11-20 8:59 ` Dave, Tushar N
2012-11-20 13:24 ` Joe Jin
2012-11-26 16:23 ` [E1000-devel] " Fujinaka, Todd
2012-11-27 0:59 ` Joe Jin
2012-11-27 2:06 ` Mary Mcgrath
2012-11-27 17:32 ` [E1000-devel] " Fujinaka, Todd
2012-11-27 18:10 ` Ben Hutchings
2012-11-28 8:31 ` Joe Jin
2012-11-28 15:53 ` Fujinaka, Todd
2012-11-29 3:10 ` Ethan Zhao
2012-11-29 15:52 ` Fujinaka, Todd
2012-12-19 3:04 ` Joe Jin
2012-12-19 5:52 ` Yijing Wang
2012-12-19 6:13 ` Joe Jin
2012-11-20 13:24 ` Joe Jin
2012-11-14 3:37 ` Li Yu
2012-11-14 3:43 ` Dave, Tushar N
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFE6BB9.4060106@oracle.com \
--to=joe.jin@oracle.com \
--cc=e1000-devel@lists.sf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tushar.n.dave@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).