netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Divya Koppera <divya.koppera@microchip.com>,
	andrew@lunn.ch, arun.ramadoss@microchip.com,
	UNGLinuxDriver@microchip.com, hkallweit1@gmail.com,
	linux@armlinux.org.uk, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, richardcochran@gmail.com
Subject: Re: [PATCH net-next v4 1/5] net: phy: microchip_ptp : Add header file for Microchip ptp library
Date: Thu, 14 Nov 2024 14:15:03 +0000	[thread overview]
Message-ID: <4af7b21e-1340-493b-a3c0-be752ef9d7cf@linux.dev> (raw)
In-Reply-To: <20241114120455.5413-2-divya.koppera@microchip.com>

On 14/11/2024 12:04, Divya Koppera wrote:
> This ptp header file library will cover ptp macros for future phys in
> Microchip where addresses will be same but base offset and mmd address
> may changes.
> 
> Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
> ---
> v3 -> v4
> - Re-ordered mchp_ptp_clock structure.
> 
> v2 -> v3
> - No changes
> 
> v1 -> v2
> - Fixed sparse warnings and compilation errors/warnings reported by kernel
>    test robot
> ---
>   drivers/net/phy/microchip_ptp.h | 216 ++++++++++++++++++++++++++++++++
>   1 file changed, 216 insertions(+)
>   create mode 100644 drivers/net/phy/microchip_ptp.h
> 
> diff --git a/drivers/net/phy/microchip_ptp.h b/drivers/net/phy/microchip_ptp.h
> new file mode 100644
> index 000000000000..1b6e0d9d7e76
> --- /dev/null
> +++ b/drivers/net/phy/microchip_ptp.h
> @@ -0,0 +1,216 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + * Copyright (C) 2024 Microchip Technology
> + */
> +
> +#ifndef _MICROCHIP_PTP_H
> +#define _MICROCHIP_PTP_H
> +
> +#if IS_ENABLED(CONFIG_MICROCHIP_PHYPTP)
> +
> +#include <linux/ptp_clock_kernel.h>
> +#include <linux/ptp_clock.h>
> +#include <linux/ptp_classify.h>
> +#include <linux/net_tstamp.h>
> +#include <linux/mii.h>
> +#include <linux/phy.h>
> +
> +#define MCHP_PTP_CMD_CTL(b)			((b) + 0x0)
> +#define MCHP_PTP_CMD_CTL_LTC_STEP_NSEC		BIT(6)
> +#define MCHP_PTP_CMD_CTL_LTC_STEP_SEC		BIT(5)
> +#define MCHP_PTP_CMD_CTL_CLOCK_LOAD		BIT(4)
> +#define MCHP_PTP_CMD_CTL_CLOCK_READ		BIT(3)
> +#define MCHP_PTP_CMD_CTL_EN			BIT(1)
> +#define MCHP_PTP_CMD_CTL_DIS			BIT(0)
> +
> +#define MCHP_PTP_REF_CLK_CFG(b)			((b) + 0x2)
> +#define MCHP_PTP_REF_CLK_SRC_250MHZ		0x0
> +#define MCHP_PTP_REF_CLK_PERIOD_OVERRIDE	BIT(9)
> +#define MCHP_PTP_REF_CLK_PERIOD			4
> +#define MCHP_PTP_REF_CLK_CFG_SET	(MCHP_PTP_REF_CLK_SRC_250MHZ |\
> +					 MCHP_PTP_REF_CLK_PERIOD_OVERRIDE |\
> +					 MCHP_PTP_REF_CLK_PERIOD)
> +
> +#define MCHP_PTP_LTC_SEC_HI(b)			((b) + 0x5)
> +#define MCHP_PTP_LTC_SEC_MID(b)			((b) + 0x6)
> +#define MCHP_PTP_LTC_SEC_LO(b)			((b) + 0x7)
> +#define MCHP_PTP_LTC_NS_HI(b)			((b) + 0x8)
> +#define MCHP_PTP_LTC_NS_LO(b)			((b) + 0x9)
> +#define MCHP_PTP_LTC_RATE_ADJ_HI(b)		((b) + 0xc)
> +#define MCHP_PTP_LTC_RATE_ADJ_HI_DIR		BIT(15)
> +#define MCHP_PTP_LTC_RATE_ADJ_LO(b)		((b) + 0xd)
> +#define MCHP_PTP_LTC_STEP_ADJ_HI(b)		((b) + 0x12)
> +#define MCHP_PTP_LTC_STEP_ADJ_HI_DIR		BIT(15)
> +#define MCHP_PTP_LTC_STEP_ADJ_LO(b)		((b) + 0x13)
> +#define MCHP_PTP_LTC_READ_SEC_HI(b)		((b) + 0x29)
> +#define MCHP_PTP_LTC_READ_SEC_MID(b)		((b) + 0x2a)
> +#define MCHP_PTP_LTC_READ_SEC_LO(b)		((b) + 0x2b)
> +#define MCHP_PTP_LTC_READ_NS_HI(b)		((b) + 0x2c)
> +#define MCHP_PTP_LTC_READ_NS_LO(b)		((b) + 0x2d)
> +#define MCHP_PTP_OP_MODE(b)			((b) + 0x41)
> +#define MCHP_PTP_OP_MODE_DIS			0
> +#define MCHP_PTP_OP_MODE_STANDALONE		1
> +#define MCHP_PTP_LATENCY_CORRECTION_CTL(b)	((b) + 0x44)
> +#define MCHP_PTP_PREDICTOR_EN			BIT(6)
> +#define MCHP_PTP_TX_PRED_DIS			BIT(1)
> +#define MCHP_PTP_RX_PRED_DIS			BIT(0)
> +#define MCHP_PTP_LATENCY_SETTING		(MCHP_PTP_PREDICTOR_EN | \
> +						 MCHP_PTP_TX_PRED_DIS | \
> +						 MCHP_PTP_RX_PRED_DIS)
> +
> +#define MCHP_PTP_INT_EN(b)			((b) + 0x0)
> +#define MCHP_PTP_INT_STS(b)			((b) + 0x01)
> +#define MCHP_PTP_INT_TX_TS_OVRFL_EN		BIT(3)
> +#define MCHP_PTP_INT_TX_TS_EN			BIT(2)
> +#define MCHP_PTP_INT_RX_TS_OVRFL_EN		BIT(1)
> +#define MCHP_PTP_INT_RX_TS_EN			BIT(0)
> +#define MCHP_PTP_INT_ALL_MSK		(MCHP_PTP_INT_TX_TS_OVRFL_EN | \
> +					 MCHP_PTP_INT_TX_TS_EN | \
> +					 MCHP_PTP_INT_RX_TS_OVRFL_EN |\
> +					 MCHP_PTP_INT_RX_TS_EN)
> +
> +#define MCHP_PTP_CAP_INFO(b)			((b) + 0x2e)
> +#define MCHP_PTP_TX_TS_CNT(v)			(((v) & GENMASK(11, 8)) >> 8)
> +#define MCHP_PTP_RX_TS_CNT(v)			((v) & GENMASK(3, 0))
> +
> +#define MCHP_PTP_RX_PARSE_CONFIG(b)		((b) + 0x42)
> +#define MCHP_PTP_RX_PARSE_L2_ADDR_EN(b)		((b) + 0x44)
> +#define MCHP_PTP_RX_PARSE_IPV4_ADDR_EN(b)	((b) + 0x45)
> +
> +#define MCHP_PTP_RX_TIMESTAMP_CONFIG(b)		((b) + 0x4e)
> +#define MCHP_PTP_RX_TIMESTAMP_CONFIG_PTP_FCS_DIS BIT(0)
> +
> +#define MCHP_PTP_RX_VERSION(b)			((b) + 0x48)
> +#define MCHP_PTP_RX_TIMESTAMP_EN(b)		((b) + 0x4d)
> +
> +#define MCHP_PTP_RX_INGRESS_NS_HI(b)		((b) + 0x54)
> +#define MCHP_PTP_RX_INGRESS_NS_HI_TS_VALID	BIT(15)
> +
> +#define MCHP_PTP_RX_INGRESS_NS_LO(b)		((b) + 0x55)
> +#define MCHP_PTP_RX_INGRESS_SEC_HI(b)		((b) + 0x56)
> +#define MCHP_PTP_RX_INGRESS_SEC_LO(b)		((b) + 0x57)
> +#define MCHP_PTP_RX_MSG_HEADER2(b)		((b) + 0x59)
> +
> +#define MCHP_PTP_TX_PARSE_CONFIG(b)		((b) + 0x82)
> +#define MCHP_PTP_PARSE_CONFIG_LAYER2_EN		BIT(0)
> +#define MCHP_PTP_PARSE_CONFIG_IPV4_EN		BIT(1)
> +#define MCHP_PTP_PARSE_CONFIG_IPV6_EN		BIT(2)
> +
> +#define MCHP_PTP_TX_PARSE_L2_ADDR_EN(b)		((b) + 0x84)
> +#define MCHP_PTP_TX_PARSE_IPV4_ADDR_EN(b)	((b) + 0x85)
> +
> +#define MCHP_PTP_TX_VERSION(b)			((b) + 0x88)
> +#define MCHP_PTP_MAX_VERSION(x)			(((x) & GENMASK(7, 0)) << 8)
> +#define MCHP_PTP_MIN_VERSION(x)			((x) & GENMASK(7, 0))
> +
> +#define MCHP_PTP_TX_TIMESTAMP_EN(b)		((b) + 0x8d)
> +#define MCHP_PTP_TIMESTAMP_EN_SYNC		BIT(0)
> +#define MCHP_PTP_TIMESTAMP_EN_DREQ		BIT(1)
> +#define MCHP_PTP_TIMESTAMP_EN_PDREQ		BIT(2)
> +#define MCHP_PTP_TIMESTAMP_EN_PDRES		BIT(3)
> +#define MCHP_PTP_TIMESTAMP_EN_ALL		(MCHP_PTP_TIMESTAMP_EN_SYNC |\
> +						 MCHP_PTP_TIMESTAMP_EN_DREQ |\
> +						 MCHP_PTP_TIMESTAMP_EN_PDREQ |\
> +						 MCHP_PTP_TIMESTAMP_EN_PDRES)
> +
> +#define MCHP_PTP_TX_TIMESTAMP_CONFIG(b)		((b) + 0x8e)
> +#define MCHP_PTP_TX_TIMESTAMP_CONFIG_PTP_FCS_DIS BIT(0)
> +
> +#define MCHP_PTP_TX_MOD(b)			((b) + 0x8f)
> +#define MCHP_PTP_TX_MOD_PTP_SYNC_TS_INSERT	BIT(12)
> +#define MCHP_PTP_TX_MOD_PTP_FU_TS_INSERT	BIT(11)
> +
> +#define MCHP_PTP_TX_EGRESS_NS_HI(b)		((b) + 0x94)
> +#define MCHP_PTP_TX_EGRESS_NS_HI_TS_VALID	BIT(15)
> +
> +#define MCHP_PTP_TX_EGRESS_NS_LO(b)		((b) + 0x95)
> +#define MCHP_PTP_TX_EGRESS_SEC_HI(b)		((b) + 0x96)
> +#define MCHP_PTP_TX_EGRESS_SEC_LO(b)		((b) + 0x97)
> +#define MCHP_PTP_TX_MSG_HEADER2(b)		((b) + 0x99)
> +
> +#define MCHP_PTP_TSU_GEN_CONFIG(b)		((b) + 0xc0)
> +#define MCHP_PTP_TSU_GEN_CFG_TSU_EN		BIT(0)
> +
> +#define MCHP_PTP_TSU_HARD_RESET(b)		((b) + 0xc1)
> +#define MCHP_PTP_TSU_HARDRESET			BIT(0)
> +
> +/* Represents 1ppm adjustment in 2^32 format with
> + * each nsec contains 4 clock cycles in 250MHz.
> + * The value is calculated as following: (1/1000000)/((2^-32)/4)
> + */
> +#define MCHP_PTP_1PPM_FORMAT			17179
> +#define MCHP_PTP_FIFO_SIZE			8
> +#define MCHP_PTP_MAX_ADJ				31249999
> +
> +#define BASE_CLK(p)		((p)->clk_base_addr)
> +#define BASE_PORT(p)		((p)->port_base_addr)
> +#define PTP_MMD(p)		((p)->mmd)
> +
> +enum ptp_fifo_dir {
> +	PTP_INGRESS_FIFO,
> +	PTP_EGRESS_FIFO
> +};
> +
> +struct mchp_ptp_clock {
> +	struct mii_timestamper mii_ts;
> +	struct phy_device *phydev;
> +	struct ptp_clock *ptp_clock;
> +
> +	struct sk_buff_head tx_queue;
> +	struct sk_buff_head rx_queue;
> +	struct list_head rx_ts_list;
> +
> +	struct ptp_clock_info caps;
> +
> +	/* Lock for Rx ts fifo */
> +	spinlock_t rx_ts_lock;
> +	int hwts_tx_type;
> +
> +	enum hwtstamp_rx_filters rx_filter;
> +	int layer;
> +	int version;
> +	u16 port_base_addr;
> +	u16 clk_base_addr;
> +
> +	/* Lock for phc */
> +	struct mutex ptp_lock;
> +	u8 mmd;
> +};
> 

I'm not quite sure that this layout is better, but as Andrew said if
it's not going to do Mpps processing - we are fine.

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>

  reply	other threads:[~2024-11-14 14:15 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-14 12:04 [PATCH net-next v4 0/5] Add ptp library for Microchip phys Divya Koppera
2024-11-14 12:04 ` [PATCH net-next v4 1/5] net: phy: microchip_ptp : Add header file for Microchip ptp library Divya Koppera
2024-11-14 14:15   ` Vadim Fedorenko [this message]
2024-11-16  0:37   ` Jakub Kicinski
2024-11-14 12:04 ` [PATCH net-next v4 2/5] net: phy: microchip_ptp : Add ptp library for Microchip phys Divya Koppera
2024-11-14 14:18   ` Vadim Fedorenko
2024-11-14 12:04 ` [PATCH net-next v4 3/5] net: phy: Kconfig: Add ptp library support and 1588 optional flag in " Divya Koppera
2024-11-14 14:19   ` Vadim Fedorenko
2024-11-16  0:36   ` Jakub Kicinski
2024-11-18 10:46     ` Divya.Koppera
2024-11-14 12:04 ` [PATCH net-next v4 4/5] net: phy: Makefile: Add makefile support for ptp " Divya Koppera
2024-11-14 14:19   ` Vadim Fedorenko
2024-11-14 12:04 ` [PATCH net-next v4 5/5] net: phy: microchip_t1 : Add initialization of ptp for lan887x Divya Koppera

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4af7b21e-1340-493b-a3c0-be752ef9d7cf@linux.dev \
    --to=vadim.fedorenko@linux.dev \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=arun.ramadoss@microchip.com \
    --cc=davem@davemloft.net \
    --cc=divya.koppera@microchip.com \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).