netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Richard Cochran <richardcochran@gmail.com>,
	kernel@oss.qualcomm.com, linux-mmc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: qcom: lemans-evk: Add sound card
Date: Thu, 28 Aug 2025 21:51:00 +0530	[thread overview]
Message-ID: <4cc22d40-d071-45c2-8618-3d93ae4797e2@oss.qualcomm.com> (raw)
In-Reply-To: <kckx3uwj2zdc4iagsxhb6osyv2ki7n4qubyldnvwokkkftda77@ixrgr7vapwxj>



On 8/28/2025 4:37 AM, Bjorn Andersson wrote:
> On Tue, Aug 26, 2025 at 11:51:04PM +0530, Wasim Nazir wrote:
>> From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
>>
>> Add the sound card node with tested playback over max98357a
>> I2S speakers amplifier and I2S mic.
>>
>> Introduce HS (High-Speed) MI2S pin control support.
>> The I2S max98357a speaker amplifier is connected via HS0 and I2S
>> microphones utilize the HS2 interface.
> 
> Please rewrite this as one fluent description of the hardware, not as 3
> separate things thrown into the same commit message.
> 
ACK,

Sure, will rewrite proper commit description in next version.

Thanks & Regards,
Rafi.

> Regards,
> Bjorn
> 
>>
>> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
>> Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++++++++++
>>   arch/arm64/boot/dts/qcom/lemans.dtsi    | 14 +++++++++
>>   2 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
>> index 642b66c4ad1e..4adf0f956580 100644
>> --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
>> +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
>> @@ -7,6 +7,7 @@
>>   
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include <dt-bindings/sound/qcom,q6afe.h>
>>   
>>   #include "lemans.dtsi"
>>   #include "lemans-pmics.dtsi"
>> @@ -26,6 +27,17 @@ chosen {
>>   		stdout-path = "serial0:115200n8";
>>   	};
>>   
>> +	dmic: audio-codec-0 {
>> +		compatible = "dmic-codec";
>> +		#sound-dai-cells = <0>;
>> +		num-channels = <1>;
>> +	};
>> +
>> +	max98357a: audio-codec-1 {
>> +		compatible = "maxim,max98357a";
>> +		#sound-dai-cells = <0>;
>> +	};
>> +
>>   	edp0-connector {
>>   		compatible = "dp-connector";
>>   		label = "EDP0";
>> @@ -73,6 +85,46 @@ vreg_sdc: regulator-vreg-sdc {
>>   		states = <1800000 0x1
>>   			  2950000 0x0>;
>>   	};
>> +
>> +	sound {
>> +		compatible = "qcom,qcs9100-sndcard";
>> +		model = "LEMANS-EVK";
>> +
>> +		pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
>> +		pinctrl-names = "default";
>> +
>> +		hs0-mi2s-playback-dai-link {
>> +			link-name = "HS0 MI2S Playback";
>> +
>> +			codec {
>> +				sound-dai = <&max98357a>;
>> +			};
>> +
>> +			cpu {
>> +				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
>> +			};
>> +
>> +			platform {
>> +				sound-dai = <&q6apm>;
>> +			};
>> +		};
>> +
>> +		hs2-mi2s-capture-dai-link {
>> +			link-name = "HS2 MI2S Capture";
>> +
>> +			codec {
>> +				sound-dai = <&dmic>;
>> +			};
>> +
>> +			cpu {
>> +				sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
>> +			};
>> +
>> +			platform {
>> +				sound-dai = <&q6apm>;
>> +			};
>> +		};
>> +	};
>>   };
>>   
>>   &apps_rsc {
>> diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
>> index 28f0976ab526..c8e6246b6062 100644
>> --- a/arch/arm64/boot/dts/qcom/lemans.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
>> @@ -5047,6 +5047,20 @@ dp1_hot_plug_det: dp1-hot-plug-det-state {
>>   				bias-disable;
>>   			};
>>   
>> +			hs0_mi2s_active: hs0-mi2s-active-state {
>> +				pins = "gpio114", "gpio115", "gpio116", "gpio117";
>> +				function = "hs0_mi2s";
>> +				drive-strength = <8>;
>> +				bias-disable;
>> +			};
>> +
>> +			hs2_mi2s_active: hs2-mi2s-active-state {
>> +				pins = "gpio122", "gpio123", "gpio124", "gpio125";
>> +				function = "hs2_mi2s";
>> +				drive-strength = <8>;
>> +				bias-disable;
>> +			};
>> +
>>   			qup_i2c0_default: qup-i2c0-state {
>>   				pins = "gpio20", "gpio21";
>>   				function = "qup0_se0";
>>
>> -- 
>> 2.51.0
>>


  reply	other threads:[~2025-08-28 16:21 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-26 18:20 [PATCH 0/5] arm64: dts: qcom: lemans-evk: Extend board support for additional peripherals Wasim Nazir
2025-08-26 18:21 ` [PATCH 1/5] dt-bindings: mmc: sdhci-msm: Document the Lemans compatible Wasim Nazir
2025-08-27  1:19   ` Dmitry Baryshkov
2025-08-28 14:54     ` Monish Chunara
2025-08-26 18:21 ` [PATCH 2/5] arm64: dts: qcom: lemans: Add SDHC controller and SDC pin configuration Wasim Nazir
2025-08-27  1:20   ` Dmitry Baryshkov
2025-08-28 14:57     ` Monish Chunara
2025-09-03 16:12     ` Konrad Dybcio
2025-09-03 16:28       ` Wasim Nazir
2025-09-03 17:16         ` Konrad Dybcio
2025-08-26 18:21 ` [PATCH 3/5] arm64: dts: qcom: lemans-evk: Extend peripheral and subsystem support Wasim Nazir
2025-08-27  1:35   ` Dmitry Baryshkov
2025-08-28  6:35     ` Sushrut Shree Trivedi
2025-08-28 11:01       ` Dmitry Baryshkov
2025-08-28 13:08     ` Sushrut Shree Trivedi
2025-08-28 13:30       ` Dmitry Baryshkov
2025-08-29 14:20         ` Monish Chunara
2025-08-29 16:24           ` Dmitry Baryshkov
2025-09-01  7:32             ` Krishna Kurapati PSSNV
2025-09-02  2:34               ` Dmitry Baryshkov
2025-09-02 17:16                 ` Dmitry Baryshkov
2025-09-03  9:12                   ` Krishna Kurapati PSSNV
2025-08-28 15:05     ` Monish Chunara
2025-09-01 11:32     ` Vikash Garodia
2025-08-27 23:06   ` Bjorn Andersson
2025-08-28 12:23     ` Wasim Nazir
2025-08-28  6:56   ` Krzysztof Kozlowski
2025-08-28 15:15     ` Wasim Nazir
2025-08-26 18:21 ` [PATCH 4/5] arm64: dts: qcom: lemans: Add gpr node Wasim Nazir
2025-08-26 18:21 ` [PATCH 5/5] arm64: dts: qcom: lemans-evk: Add sound card Wasim Nazir
2025-08-27 23:07   ` Bjorn Andersson
2025-08-28 16:21     ` Mohammad Rafi Shaik [this message]
2025-08-26 23:19 ` [PATCH 0/5] arm64: dts: qcom: lemans-evk: Extend board support for additional peripherals Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4cc22d40-d071-45c2-8618-3d93ae4797e2@oss.qualcomm.com \
    --to=mohammad.rafi.shaik@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=wasim.nazir@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).