From: Nikolay Aleksandrov <nikolay@redhat.com>
To: sony.chacko@qlogic.com
Cc: netdev@vger.kernel.org, agospoda@redhat.com,
rajesh.borundia@qlogic.com, davem@davemloft.net
Subject: Re: [PATCH net-next] netxen: write IP address to firmware when using bonding
Date: Tue, 25 Sep 2012 18:43:57 +0200 [thread overview]
Message-ID: <5061DF4D.60708@redhat.com> (raw)
In-Reply-To: <1348562883-14780-1-git-send-email-nikolay@redhat.com>
On 25/09/12 10:48, Nikolay Aleksandrov wrote:
> From: Nikolay Aleksandrov<naleksan@redhat.com>
>
> This patch allows LRO aggregation on bonded devices that contain an NX3031
> device. It also adds a for_each_netdev_in_bond_rcu(bond, slave) macro
> which executes for each slave that has bond as master.
>
> Signed-off-by: Andy Gospodarek<agospoda@redhat.com>
> Signed-off-by: Nikolay Aleksandrov<nikolay@redhat.com>
> ---
> .../net/ethernet/qlogic/netxen/netxen_nic_main.c | 113 +++++++++++++++------
> include/linux/netdevice.h | 3 +
> 2 files changed, 87 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
> index e2a4858..aaf6cf7 100644
> --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
> +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
> @@ -3244,6 +3244,25 @@ netxen_restore_indev_addr(struct net_device *netdev, unsigned long event)
> }
> }
>
> +static inline int
> +netxen_config_checkdev(struct net_device *dev)
> +{
> + struct netxen_adapter *adapter;
> +
> + if (!is_netxen_netdev(dev))
> + return -ENODEV;
> +
> + adapter = netdev_priv(dev);
> +
> + if(!adapter)
> + return -ENODEV;
> +
> + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> static int netxen_netdev_event(struct notifier_block *this,
> unsigned long event, void *ptr)
> {
> @@ -3260,18 +3279,27 @@ recheck:
> goto recheck;
> }
>
> - if (!is_netxen_netdev(dev))
> - goto done;
> -
> - adapter = netdev_priv(dev);
> -
> - if (!adapter)
> - goto done;
> + /* If this is a bonding device, look for netxen-based slaves*/
> + if (dev->priv_flags& IFF_BONDING) {
> + struct net_device *slave;
>
> - if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
> - goto done;
> + rcu_read_lock();
> + for_each_netdev_in_bond_rcu(dev, slave) {
> + if (netxen_config_checkdev(slave)< 0)
> + continue;
> +
> + adapter = netdev_priv(slave);
> + netxen_config_indev_addr(adapter, orig_dev, event);
> + }
> + rcu_read_unlock();
>
> - netxen_config_indev_addr(adapter, orig_dev, event);
> + } else {
> + if (netxen_config_checkdev(dev)< 0)
> + goto done;
> +
> + adapter = netdev_priv(dev);
> + netxen_config_indev_addr(adapter, orig_dev, event);
> + }
> done:
> return NOTIFY_DONE;
> }
> @@ -3296,30 +3324,57 @@ recheck:
> goto recheck;
> }
>
> - if (!is_netxen_netdev(dev))
> - goto done;
> + /* If this is a bonding device, look for netxen-based slaves*/
> + if (dev->priv_flags& IFF_BONDING) {
> + struct net_device *slave;
>
> - adapter = netdev_priv(dev);
> + rcu_read_lock();
> + for_each_netdev_in_bond_rcu(dev, slave) {
> + if (netxen_config_checkdev(slave)< 0)
> + continue;
>
> - if (!adapter || !netxen_destip_supported(adapter))
> - goto done;
> + adapter = netdev_priv(slave);
>
> - if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
> - goto done;
> + if (!netxen_destip_supported(adapter))
> + continue;
>
> - switch (event) {
> - case NETDEV_UP:
> - netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_UP);
> - netxen_list_config_vlan_ip(adapter, ifa, NX_IP_UP);
> - break;
> - case NETDEV_DOWN:
> - netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_DOWN);
> - netxen_list_config_vlan_ip(adapter, ifa, NX_IP_DOWN);
> - break;
> - default:
> - break;
> - }
> + switch (event) {
> + case NETDEV_UP:
> + netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_UP);
> + netxen_list_config_vlan_ip(adapter, ifa, NX_IP_UP);
> + break;
> + case NETDEV_DOWN:
> + netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_DOWN);
> + netxen_list_config_vlan_ip(adapter, ifa, NX_IP_DOWN);
> + break;
> + default:
> + break;
> + }
> + }
> + rcu_read_unlock();
>
> + } else {
> + if (netxen_config_checkdev(dev)< 0)
> + goto done;
> +
> + adapter = netdev_priv(dev);
> +
> + if (!netxen_destip_supported(adapter))
> + goto done;
> +
> + switch (event) {
> + case NETDEV_UP:
> + netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_UP);
> + netxen_list_config_vlan_ip(adapter, ifa, NX_IP_UP);
> + break;
> + case NETDEV_DOWN:
> + netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_DOWN);
> + netxen_list_config_vlan_ip(adapter, ifa, NX_IP_DOWN);
> + break;
> + default:
> + break;
> + }
> + }
> done:
> return NOTIFY_DONE;
> }
> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
> index 59dc05f3..463bb40 100644
> --- a/include/linux/netdevice.h
> +++ b/include/linux/netdevice.h
> @@ -1578,6 +1578,9 @@ extern rwlock_t dev_base_lock; /* Device list lock */
> list_for_each_entry_continue(d,&(net)->dev_base_head, dev_list)
> #define for_each_netdev_continue_rcu(net, d) \
> list_for_each_entry_continue_rcu(d,&(net)->dev_base_head, dev_list)
> +#define for_each_netdev_in_bond_rcu(bond, slave) \
> + for_each_netdev_rcu(&init_net, slave) \
> + if (slave->master == bond)
> #define net_device_entry(lh) list_entry(lh, struct net_device, dev_list)
>
> static inline struct net_device *next_net_device(struct net_device *dev)
Ah yes, you're correct. I'll fix the cosmetic issues and re-post it.
I would like to know if the patch is acceptable otherwise, and if
there are any comments about the implementation so I will
wait a little bit to see if anything else comes up.
Thank you for the review.
Best regards,
Nikolay Aleksandrov
next prev parent reply other threads:[~2012-09-25 16:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-25 8:48 [PATCH net-next] netxen: write IP address to firmware when using bonding Nikolay Aleksandrov
2012-09-25 15:59 ` Rajesh Borundia
2012-09-25 16:43 ` Nikolay Aleksandrov [this message]
2012-09-25 18:28 ` Rajesh Borundia
2012-10-02 9:16 ` [PATCH net-next v2] " Nikolay Aleksandrov
2012-10-03 2:40 ` David Miller
2012-10-03 9:20 ` Nikolay Aleksandrov
2012-10-03 18:38 ` David Miller
2012-10-08 16:48 ` Rajesh Borundia
-- strict thread matches above, loose matches on Subject: below --
2011-11-23 18:43 [PATCH net-next] " Andy Gospodarek
2011-11-23 21:09 ` David Miller
2011-11-24 3:24 ` Andy Gospodarek
2011-11-24 5:38 ` David Miller
2011-11-28 6:02 ` Rajesh Borundia
2011-11-28 20:43 ` Andy Gospodarek
2011-11-29 11:58 ` Rajesh Borundia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5061DF4D.60708@redhat.com \
--to=nikolay@redhat.com \
--cc=agospoda@redhat.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=rajesh.borundia@qlogic.com \
--cc=sony.chacko@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).