From: Joe Jin <joe.jin@oracle.com>
To: "Dave, Tushar N" <tushar.n.dave@intel.com>
Cc: "e1000-devel@lists.sf.net" <e1000-devel@lists.sf.net>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Mary Mcgrath <mary.mcgrath@oracle.com>
Subject: Re: 82571EB: Detected Hardware Unit Hang
Date: Tue, 20 Nov 2012 21:24:33 +0800 [thread overview]
Message-ID: <50AB8491.4070508@oracle.com> (raw)
In-Reply-To: <061C8A8601E8EE4CA8D8FD6990CEA8913349EB41@ORSMSX102.amr.corp.intel.com>
On 11/20/12 16:59, Dave, Tushar N wrote:
> Have you power off the system completely after modifying eeprom? If not please do so.
Hi Tushar,
Seems not works for me, would you please help to check what is wrong of my operations?
Original eeprom dump:
# ethtool -e eth3 | head -8
Offset Values
------ ------
0x0000 00 15 17 16 ee 9a 24 05 ff ff a2 50 ff ff ff ff
0x0010 57 d4 07 74 2f a4 a4 11 86 80 a4 10 86 80 65 b1
0x0020 08 00 a4 10 00 58 00 00 01 50 00 00 00 00 00 01
0x0030 f6 6c b0 37 a6 07 03 84 83 07 00 00 03 c3 02 06
^^^^^
0x0040 08 00 f0 0e 64 21 40 00 01 40 00 00 00 00 00 00
0x0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# lspci -s 0000:52:00.1 -vvv
52:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
<--snip-->
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
^^^^^^^^^^^^^^^^^^^^^
<--snip-->
# ethtool eth3
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
# ethtool -E eth3 magic 0x10a48086 offset 0x34 value 0xa7
# ethtool -e eth3 | head -8
Offset Values
------ ------
0x0000 00 15 17 16 ee 9a 24 05 ff ff a2 50 ff ff ff ff
0x0010 57 d4 07 74 2f a4 a4 11 86 80 a4 10 86 80 65 b1
0x0020 08 00 a4 10 00 58 00 00 01 50 00 00 00 00 00 01
0x0030 f6 6c b0 37 a7 07 03 84 83 07 00 00 03 c3 02 06
^^^^^ <== a6 --> a7
0x0040 08 00 f0 0e 64 21 40 00 01 40 00 00 00 00 00 00
0x0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# reboot
# ethtool -e eth3 | head -8
Offset Values
------ ------
0x0000 00 15 17 16 ee 9a 24 05 ff ff a2 50 ff ff ff ff
0x0010 57 d4 07 74 2f a4 a4 11 86 80 a4 10 86 80 65 b1
0x0020 08 00 a4 10 00 58 00 00 01 50 00 00 00 00 00 01
0x0030 f6 6c b0 37 a7 07 03 84 83 07 00 00 03 c3 02 06
0x0040 08 00 f0 0e 64 21 40 00 01 40 00 00 00 00 00 00
0x0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# lspci -s 0000:52:00.1 -vvv
52:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
<--snip-->
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
^^^^^^^^^^^^^^^^^^^^^
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
<--snip-->
# ethtool -E eth3 magic 0x10a48086 offset 0x35 value 0x17
# ethtool -e eth3 | head -8
Offset Values
------ ------
0x0000 00 15 17 16 ee 9a 24 05 ff ff a2 50 ff ff ff ff
0x0010 57 d4 07 74 2f a4 a4 11 86 80 a4 10 86 80 65 b1
0x0020 08 00 a4 10 00 58 00 00 01 50 00 00 00 00 00 01
0x0030 f6 6c b0 37 a6 17 03 84 83 07 00 00 03 c3 02 06
^^^^^<== 07 -> 17
0x0040 08 00 f0 0e 64 21 40 00 01 40 00 00 00 00 00 00
0x0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# reboot
# ethtool -e eth3 | head -8
Offset Values
------ ------
0x0000 00 15 17 16 ee 9a 24 05 ff ff a2 50 ff ff ff ff
0x0010 57 d4 07 74 2f a4 a4 11 86 80 a4 10 86 80 65 b1
0x0020 08 00 a4 10 00 58 00 00 01 50 00 00 00 00 00 01
0x0030 f6 6c b0 37 a6 17 03 84 83 07 00 00 03 c3 02 06
^^^^^<== 07 -> 17
0x0040 08 00 f0 0e 64 21 40 00 01 40 00 00 00 00 00 00
0x0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# lspci -s 0000:52:00.1 -vvv
52:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
<--snip-->
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
^^^^^^^^^^^^^^^^^^^^^
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
<--snip-->
Thanks,
Joe
next prev parent reply other threads:[~2012-11-20 13:24 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-08 6:24 82571EB: Detected Hardware Unit Hang Joe Jin
2012-11-08 20:35 ` Dave, Tushar N
2012-11-09 1:22 ` Joe Jin
2012-11-14 2:47 ` Joe Jin
2012-11-14 3:45 ` Dave, Tushar N
2012-11-15 0:32 ` Joe Jin
2012-11-15 20:26 ` Dave, Tushar N
2012-11-19 5:38 ` Joe Jin
2012-11-20 8:59 ` Dave, Tushar N
2012-11-20 13:24 ` Joe Jin
2012-11-26 16:23 ` [E1000-devel] " Fujinaka, Todd
2012-11-27 0:59 ` Joe Jin
2012-11-27 2:06 ` Mary Mcgrath
2012-11-27 17:32 ` [E1000-devel] " Fujinaka, Todd
2012-11-27 18:10 ` Ben Hutchings
2012-11-27 18:24 ` Fujinaka, Todd
2012-11-28 8:31 ` Joe Jin
2012-11-28 15:53 ` Fujinaka, Todd
2012-11-29 3:10 ` Ethan Zhao
2012-11-29 15:52 ` Fujinaka, Todd
2012-12-19 3:04 ` Joe Jin
2012-12-19 5:52 ` Yijing Wang
2012-12-19 6:13 ` Joe Jin
2012-11-20 13:24 ` Joe Jin [this message]
2012-11-14 3:37 ` Li Yu
2012-11-14 3:43 ` Dave, Tushar N
-- strict thread matches above, loose matches on Subject: below --
2012-07-09 8:51 Joe Jin
2012-07-09 9:21 ` Eric Dumazet
2012-07-09 12:19 ` Joe Jin
2012-07-10 7:40 ` Joe Jin
2012-07-10 18:14 ` Wyborny, Carolyn
2012-07-10 19:02 ` Dave, Tushar N
2012-07-10 19:17 ` Dave, Tushar N
2012-07-11 0:34 ` Joe Jin
2012-07-11 1:18 ` Dave, Tushar N
2012-07-11 1:44 ` Joe Jin
2012-07-11 3:22 ` Dave, Tushar N
2012-07-11 3:29 ` Joe Jin
2012-07-11 4:05 ` Dave, Tushar N
2012-07-11 5:03 ` Joe Jin
2012-07-11 7:11 ` Dave, Tushar N
2012-07-11 7:17 ` Joe Jin
2012-07-11 7:37 ` Dave, Tushar N
2012-07-11 7:38 ` Joe Jin
2012-07-11 7:50 ` Dave, Tushar N
2012-07-11 7:53 ` Joe Jin
2012-07-11 18:51 ` Dave, Tushar N
2012-07-12 2:23 ` Joe Jin
2012-07-12 2:52 ` Dave, Tushar N
2012-07-12 2:57 ` Joe Jin
2012-07-12 3:07 ` Dave, Tushar N
2012-07-12 3:12 ` Joe Jin
2012-07-12 5:57 ` Dave, Tushar N
2012-07-12 6:16 ` Joe Jin
2012-07-12 6:41 ` Dave, Tushar N
2012-07-12 7:10 ` Joe Jin
2012-07-12 18:19 ` Dave, Tushar N
2012-07-12 23:46 ` Joe Jin
2012-07-13 4:10 ` Dave, Tushar N
2012-07-13 4:33 ` Joe Jin
2012-07-15 3:42 ` Dave, Tushar N
2012-07-15 3:52 ` Joe Jin
2012-07-15 13:35 ` Henrique de Moraes Holschuh
2012-07-16 15:47 ` Ben Hutchings
2012-07-16 16:08 ` Henrique de Moraes Holschuh
2012-07-17 4:48 ` Jon Mason
2012-07-17 4:45 ` Jon Mason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50AB8491.4070508@oracle.com \
--to=joe.jin@oracle.com \
--cc=e1000-devel@lists.sf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mary.mcgrath@oracle.com \
--cc=netdev@vger.kernel.org \
--cc=tushar.n.dave@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).