[PATCH 1/3] net: cpsw: replace pr_xxx with dev_xxx functions

[PATCH 1/3] net: cpsw: replace pr_xxx with dev_xxx functions

[Jan Luebbe]

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
 drivers/net/ethernet/ti/cpsw.c |   47 ++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index fb1a692..c0e676a 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -729,7 +729,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		return -EINVAL;
 
 	if (of_property_read_u32(node, "slaves", &prop)) {
-		pr_err("Missing slaves property in the DT.\n");
+		dev_err(&pdev->dev, "Missing slaves property in the DT.\n");
 		return -EINVAL;
 	}
 	data->slaves = prop;
@@ -737,91 +737,91 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 	data->slave_data = kzalloc(sizeof(struct cpsw_slave_data) *
 				   data->slaves, GFP_KERNEL);
 	if (!data->slave_data) {
-		pr_err("Could not allocate slave memory.\n");
+		dev_err(&pdev->dev, "Could not allocate slave memory.\n");
 		return -EINVAL;
 	}
 
 	data->no_bd_ram = of_property_read_bool(node, "no_bd_ram");
 
 	if (of_property_read_u32(node, "cpdma_channels", &prop)) {
-		pr_err("Missing cpdma_channels property in the DT.\n");
+		dev_err(&pdev->dev, "Missing cpdma_channels property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->channels = prop;
 
 	if (of_property_read_u32(node, "host_port_no", &prop)) {
-		pr_err("Missing host_port_no property in the DT.\n");
+		dev_err(&pdev->dev, "Missing host_port_no property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->host_port_num = prop;
 
 	if (of_property_read_u32(node, "cpdma_reg_ofs", &prop)) {
-		pr_err("Missing cpdma_reg_ofs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing cpdma_reg_ofs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->cpdma_reg_ofs = prop;
 
 	if (of_property_read_u32(node, "cpdma_sram_ofs", &prop)) {
-		pr_err("Missing cpdma_sram_ofs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing cpdma_sram_ofs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->cpdma_sram_ofs = prop;
 
 	if (of_property_read_u32(node, "ale_reg_ofs", &prop)) {
-		pr_err("Missing ale_reg_ofs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing ale_reg_ofs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->ale_reg_ofs = prop;
 
 	if (of_property_read_u32(node, "ale_entries", &prop)) {
-		pr_err("Missing ale_entries property in the DT.\n");
+		dev_err(&pdev->dev, "Missing ale_entries property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->ale_entries = prop;
 
 	if (of_property_read_u32(node, "host_port_reg_ofs", &prop)) {
-		pr_err("Missing host_port_reg_ofs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing host_port_reg_ofs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->host_port_reg_ofs = prop;
 
 	if (of_property_read_u32(node, "hw_stats_reg_ofs", &prop)) {
-		pr_err("Missing hw_stats_reg_ofs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing hw_stats_reg_ofs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->hw_stats_reg_ofs = prop;
 
 	if (of_property_read_u32(node, "bd_ram_ofs", &prop)) {
-		pr_err("Missing bd_ram_ofs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing bd_ram_ofs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->bd_ram_ofs = prop;
 
 	if (of_property_read_u32(node, "bd_ram_size", &prop)) {
-		pr_err("Missing bd_ram_size property in the DT.\n");
+		dev_err(&pdev->dev, "Missing bd_ram_size property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->bd_ram_size = prop;
 
 	if (of_property_read_u32(node, "rx_descs", &prop)) {
-		pr_err("Missing rx_descs property in the DT.\n");
+		dev_err(&pdev->dev, "Missing rx_descs property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
 	data->rx_descs = prop;
 
 	if (of_property_read_u32(node, "mac_control", &prop)) {
-		pr_err("Missing mac_control property in the DT.\n");
+		dev_err(&pdev->dev, "Missing mac_control property in the DT.\n");
 		ret = -EINVAL;
 		goto error_ret;
 	}
@@ -833,14 +833,14 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		const void *mac_addr = NULL;
 
 		if (of_property_read_string(slave_node, "phy_id", &phy_id)) {
-			pr_err("Missing slave[%d] phy_id property\n", i);
+			dev_err(&pdev->dev, "Missing slave[%d] phy_id property.\n", i);
 			ret = -EINVAL;
 			goto error_ret;
 		}
 		slave_data->phy_id = phy_id;
 
 		if (of_property_read_u32(slave_node, "slave_reg_ofs", &prop)) {
-			pr_err("Missing slave[%d] slave_reg_ofs property\n", i);
+			dev_err(&pdev->dev, "Missing slave[%d] slave_reg_ofs property.\n", i);
 			ret = -EINVAL;
 			goto error_ret;
 		}
@@ -848,8 +848,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 
 		if (of_property_read_u32(slave_node, "sliver_reg_ofs",
 					 &prop)) {
-			pr_err("Missing slave[%d] sliver_reg_ofs property\n",
-				i);
+			dev_err(&pdev->dev, "Missing slave[%d] sliver_reg_ofs property.\n", i);
 			ret = -EINVAL;
 			goto error_ret;
 		}
@@ -868,7 +867,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
 	/* We do not want to force this, as in some cases may not have child */
 	if (ret)
-		pr_warn("Doesn't have any child node\n");
+		dev_warn(&pdev->dev, "Doesn't have any child node\n");
 
 	return 0;
 
@@ -890,7 +889,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 
 	ndev = alloc_etherdev(sizeof(struct cpsw_priv));
 	if (!ndev) {
-		pr_err("error allocating net_device\n");
+		pr_err("cpsw: error allocating net_device\n");
 		return -ENOMEM;
 	}
 
@@ -909,7 +908,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	if (cpsw_probe_dt(&priv->data, pdev)) {
-		pr_err("cpsw: platform data missing\n");
+		dev_err(&pdev->dev, "platform data missing\n");
 		ret = -ENODEV;
 		goto clean_ndev_ret;
 	}
@@ -917,10 +916,10 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 
 	if (is_valid_ether_addr(data->slave_data[0].mac_addr)) {
 		memcpy(priv->mac_addr, data->slave_data[0].mac_addr, ETH_ALEN);
-		pr_info("Detected MACID = %pM", priv->mac_addr);
+		dev_info(&pdev->dev, "Detected MACID = %pM", priv->mac_addr);
 	} else {
 		eth_random_addr(priv->mac_addr);
-		pr_info("Random MACID = %pM", priv->mac_addr);
+		dev_info(&pdev->dev, "Random MACID = %pM", priv->mac_addr);
 	}
 
 	memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
@@ -1120,7 +1119,7 @@ static int __devexit cpsw_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct cpsw_priv *priv = netdev_priv(ndev);
 
-	pr_info("removing device");
+	dev_info(&pdev->dev, "removing device");
 	platform_set_drvdata(pdev, NULL);
 
 	free_irq(ndev->irq, priv);
-- 
1.7.10.4

[PATCH 2/3] net: cpsw: verify correct number of slaves in DT

[Jan Luebbe]

Check that the number of available slaves passed from DT matches the
value of the "slaves" property in the cpsw node. Otherwise, priv->slaves
would be the wrong size.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
 drivers/net/ethernet/ti/cpsw.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index c0e676a..8de3e92 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -832,6 +832,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		const char *phy_id = NULL;
 		const void *mac_addr = NULL;
 
+		if (!of_device_is_available(slave_node))
+			continue;
+
+		if (i >= data->slaves) {
+			dev_err(&pdev->dev, "Too many slaves in the DT (> %d).\n",
+				data->slaves);
+			ret = -EINVAL;
+			goto error_ret;
+		}
+
 		if (of_property_read_string(slave_node, "phy_id", &phy_id)) {
 			dev_err(&pdev->dev, "Missing slave[%d] phy_id property.\n", i);
 			ret = -EINVAL;
@@ -861,6 +871,13 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		i++;
 	}
 
+	if (i < data->slaves) {
+		dev_err(&pdev->dev, "Not enough slaves in the DT (< %d).\n",
+			data->slaves);
+		ret = -EINVAL;
+		goto error_ret;
+	}
+
 	/*
 	 * Populate all the child nodes here...
 	 */
-- 
1.7.10.4

[PATCH 3/3] net: cpsw: implement ioctl for MII

[Jan Luebbe]

This allows using tools like mii-diag on CPSW.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
 drivers/net/ethernet/ti/cpsw.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 8de3e92..f476c03 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -629,6 +629,20 @@ static void cpsw_ndo_change_rx_flags(struct net_device *ndev, int flags)
 		dev_err(&ndev->dev, "multicast traffic cannot be filtered!\n");
 }
 
+static int cpsw_ndo_do_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
+{
+	struct cpsw_priv *priv = netdev_priv(ndev);
+	struct phy_device *phy = priv->slaves[0].phy;
+
+	if (!netif_running(ndev))
+		return -EINVAL;
+
+	if (!phy)
+		return -ENODEV;
+
+	return phy_mii_ioctl(phy, rq, cmd);
+}
+
 static void cpsw_ndo_tx_timeout(struct net_device *ndev)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
@@ -670,6 +684,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
 	.ndo_start_xmit		= cpsw_ndo_start_xmit,
 	.ndo_change_rx_flags	= cpsw_ndo_change_rx_flags,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= cpsw_ndo_do_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_tx_timeout		= cpsw_ndo_tx_timeout,
 	.ndo_get_stats		= cpsw_ndo_get_stats,
-- 
1.7.10.4

Re: [PATCH 3/3] net: cpsw: implement ioctl for MII

[Ben Hutchings]

On Mon, 2012-12-03 at 14:49 +0100, Jan Luebbe wrote:
> This allows using tools like mii-diag on CPSW.
> 
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
>  drivers/net/ethernet/ti/cpsw.c |   15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 8de3e92..f476c03 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -629,6 +629,20 @@ static void cpsw_ndo_change_rx_flags(struct net_device *ndev, int flags)
>  		dev_err(&ndev->dev, "multicast traffic cannot be filtered!\n");
>  }
>  
> +static int cpsw_ndo_do_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
> +{
> +	struct cpsw_priv *priv = netdev_priv(ndev);
> +	struct phy_device *phy = priv->slaves[0].phy;
> +
> +	if (!netif_running(ndev))
> +		return -EINVAL;

This is consistent with other drivers, and I'm not going to object to
one more instance, but I don't think this is the proper error code - we
don't know that there's anything wrong with the arguments, it's just
that the *device* is in the wrong state.  I don't know what the right
error code is, though.  Really I would prefer that MDIO would work even
when the device is down, unless you know that all MDIO-manageable
devices are powered off.

Ben.

> +	if (!phy)
> +		return -ENODEV;
> +
> +	return phy_mii_ioctl(phy, rq, cmd);
> +}
> +
>  static void cpsw_ndo_tx_timeout(struct net_device *ndev)
>  {
>  	struct cpsw_priv *priv = netdev_priv(ndev);
> @@ -670,6 +684,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
>  	.ndo_start_xmit		= cpsw_ndo_start_xmit,
>  	.ndo_change_rx_flags	= cpsw_ndo_change_rx_flags,
>  	.ndo_validate_addr	= eth_validate_addr,
> +	.ndo_do_ioctl		= cpsw_ndo_do_ioctl,
>  	.ndo_change_mtu		= eth_change_mtu,
>  	.ndo_tx_timeout		= cpsw_ndo_tx_timeout,
>  	.ndo_get_stats		= cpsw_ndo_get_stats,

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [PATCH 1/3] net: cpsw: replace pr_xxx with dev_xxx functions

[Mugunthan V N]

On 12/3/2012 7:19 PM, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
>   drivers/net/ethernet/ti/cpsw.c |   47 ++++++++++++++++++++--------------------
>   1 file changed, 23 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index fb1a692..c0e676a 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -729,7 +729,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   		return -EINVAL;
>   
>   	if (of_property_read_u32(node, "slaves", &prop)) {
> -		pr_err("Missing slaves property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing slaves property in the DT.\n");
>   		return -EINVAL;
>   	}
>   	data->slaves = prop;
> @@ -737,91 +737,91 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   	data->slave_data = kzalloc(sizeof(struct cpsw_slave_data) *
>   				   data->slaves, GFP_KERNEL);
>   	if (!data->slave_data) {
> -		pr_err("Could not allocate slave memory.\n");
> +		dev_err(&pdev->dev, "Could not allocate slave memory.\n");
>   		return -EINVAL;
>   	}
>   
>   	data->no_bd_ram = of_property_read_bool(node, "no_bd_ram");
>   
>   	if (of_property_read_u32(node, "cpdma_channels", &prop)) {
> -		pr_err("Missing cpdma_channels property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing cpdma_channels property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->channels = prop;
>   
>   	if (of_property_read_u32(node, "host_port_no", &prop)) {
> -		pr_err("Missing host_port_no property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing host_port_no property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->host_port_num = prop;
>   
>   	if (of_property_read_u32(node, "cpdma_reg_ofs", &prop)) {
> -		pr_err("Missing cpdma_reg_ofs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing cpdma_reg_ofs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->cpdma_reg_ofs = prop;
>   
>   	if (of_property_read_u32(node, "cpdma_sram_ofs", &prop)) {
> -		pr_err("Missing cpdma_sram_ofs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing cpdma_sram_ofs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->cpdma_sram_ofs = prop;
>   
>   	if (of_property_read_u32(node, "ale_reg_ofs", &prop)) {
> -		pr_err("Missing ale_reg_ofs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing ale_reg_ofs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->ale_reg_ofs = prop;
>   
>   	if (of_property_read_u32(node, "ale_entries", &prop)) {
> -		pr_err("Missing ale_entries property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing ale_entries property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->ale_entries = prop;
>   
>   	if (of_property_read_u32(node, "host_port_reg_ofs", &prop)) {
> -		pr_err("Missing host_port_reg_ofs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing host_port_reg_ofs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->host_port_reg_ofs = prop;
>   
>   	if (of_property_read_u32(node, "hw_stats_reg_ofs", &prop)) {
> -		pr_err("Missing hw_stats_reg_ofs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing hw_stats_reg_ofs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->hw_stats_reg_ofs = prop;
>   
>   	if (of_property_read_u32(node, "bd_ram_ofs", &prop)) {
> -		pr_err("Missing bd_ram_ofs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing bd_ram_ofs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->bd_ram_ofs = prop;
>   
>   	if (of_property_read_u32(node, "bd_ram_size", &prop)) {
> -		pr_err("Missing bd_ram_size property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing bd_ram_size property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->bd_ram_size = prop;
>   
>   	if (of_property_read_u32(node, "rx_descs", &prop)) {
> -		pr_err("Missing rx_descs property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing rx_descs property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
>   	data->rx_descs = prop;
>   
>   	if (of_property_read_u32(node, "mac_control", &prop)) {
> -		pr_err("Missing mac_control property in the DT.\n");
> +		dev_err(&pdev->dev, "Missing mac_control property in the DT.\n");
>   		ret = -EINVAL;
>   		goto error_ret;
>   	}
> @@ -833,14 +833,14 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   		const void *mac_addr = NULL;
>   
>   		if (of_property_read_string(slave_node, "phy_id", &phy_id)) {
> -			pr_err("Missing slave[%d] phy_id property\n", i);
> +			dev_err(&pdev->dev, "Missing slave[%d] phy_id property.\n", i);
>   			ret = -EINVAL;
>   			goto error_ret;
>   		}
>   		slave_data->phy_id = phy_id;
>   
>   		if (of_property_read_u32(slave_node, "slave_reg_ofs", &prop)) {
> -			pr_err("Missing slave[%d] slave_reg_ofs property\n", i);
> +			dev_err(&pdev->dev, "Missing slave[%d] slave_reg_ofs property.\n", i);
>   			ret = -EINVAL;
>   			goto error_ret;
>   		}
> @@ -848,8 +848,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   
>   		if (of_property_read_u32(slave_node, "sliver_reg_ofs",
>   					 &prop)) {
> -			pr_err("Missing slave[%d] sliver_reg_ofs property\n",
> -				i);
> +			dev_err(&pdev->dev, "Missing slave[%d] sliver_reg_ofs property.\n", i);
>   			ret = -EINVAL;
>   			goto error_ret;
>   		}
> @@ -868,7 +867,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
>   	/* We do not want to force this, as in some cases may not have child */
>   	if (ret)
> -		pr_warn("Doesn't have any child node\n");
> +		dev_warn(&pdev->dev, "Doesn't have any child node\n");
>   
>   	return 0;
>   
> @@ -890,7 +889,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
>   
>   	ndev = alloc_etherdev(sizeof(struct cpsw_priv));
>   	if (!ndev) {
> -		pr_err("error allocating net_device\n");
> +		pr_err("cpsw: error allocating net_device\n");
>   		return -ENOMEM;
>   	}
>   
> @@ -909,7 +908,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
>   	pm_runtime_enable(&pdev->dev);
>   
>   	if (cpsw_probe_dt(&priv->data, pdev)) {
> -		pr_err("cpsw: platform data missing\n");
> +		dev_err(&pdev->dev, "platform data missing\n");
>   		ret = -ENODEV;
>   		goto clean_ndev_ret;
>   	}
> @@ -917,10 +916,10 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
>   
>   	if (is_valid_ether_addr(data->slave_data[0].mac_addr)) {
>   		memcpy(priv->mac_addr, data->slave_data[0].mac_addr, ETH_ALEN);
> -		pr_info("Detected MACID = %pM", priv->mac_addr);
> +		dev_info(&pdev->dev, "Detected MACID = %pM", priv->mac_addr);
>   	} else {
>   		eth_random_addr(priv->mac_addr);
> -		pr_info("Random MACID = %pM", priv->mac_addr);
> +		dev_info(&pdev->dev, "Random MACID = %pM", priv->mac_addr);
>   	}
>   
>   	memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
> @@ -1120,7 +1119,7 @@ static int __devexit cpsw_remove(struct platform_device *pdev)
>   	struct net_device *ndev = platform_get_drvdata(pdev);
>   	struct cpsw_priv *priv = netdev_priv(ndev);
>   
> -	pr_info("removing device");
> +	dev_info(&pdev->dev, "removing device");
>   	platform_set_drvdata(pdev, NULL);
>   
>   	free_irq(ndev->irq, priv);

The patches look good to me.

Acked-by: Mugunthan V N<mugunthanvnm@ti.com>

Re: [PATCH 2/3] net: cpsw: verify correct number of slaves in DT

[Mugunthan V N]

On 12/3/2012 7:19 PM, Jan Luebbe wrote:
> Check that the number of available slaves passed from DT matches the
> value of the "slaves" property in the cpsw node. Otherwise, priv->slaves
> would be the wrong size.
>
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
>   drivers/net/ethernet/ti/cpsw.c |   17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index c0e676a..8de3e92 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -832,6 +832,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   		const char *phy_id = NULL;
>   		const void *mac_addr = NULL;
>   
> +		if (!of_device_is_available(slave_node))
> +			continue;
> +
> +		if (i >= data->slaves) {
> +			dev_err(&pdev->dev, "Too many slaves in the DT (> %d).\n",
> +				data->slaves);
> +			ret = -EINVAL;
> +			goto error_ret;
> +		}
> +
>   		if (of_property_read_string(slave_node, "phy_id", &phy_id)) {
>   			dev_err(&pdev->dev, "Missing slave[%d] phy_id property.\n", i);
>   			ret = -EINVAL;
> @@ -861,6 +871,13 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
>   		i++;
>   	}
>   
> +	if (i < data->slaves) {
> +		dev_err(&pdev->dev, "Not enough slaves in the DT (< %d).\n",
> +			data->slaves);
> +		ret = -EINVAL;
> +		goto error_ret;
> +	}
> +
>   	/*
>   	 * Populate all the child nodes here...
>   	 */

The patches look good to me.

Acked-by: Mugunthan V N<mugunthanvnm@ti.com>

Regards
Mugunthan V N

Re: [PATCH 3/3] net: cpsw: implement ioctl for MII

[Mugunthan V N]

On 12/3/2012 7:19 PM, Jan Luebbe wrote:
> This allows using tools like mii-diag on CPSW.
>
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
>   drivers/net/ethernet/ti/cpsw.c |   15 +++++++++++++++
>   1 file changed, 15 insertions(+)
>
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 8de3e92..f476c03 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -629,6 +629,20 @@ static void cpsw_ndo_change_rx_flags(struct net_device *ndev, int flags)
>   		dev_err(&ndev->dev, "multicast traffic cannot be filtered!\n");
>   }
>   
> +static int cpsw_ndo_do_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
> +{
> +	struct cpsw_priv *priv = netdev_priv(ndev);
> +	struct phy_device *phy = priv->slaves[0].phy;
> +
> +	if (!netif_running(ndev))
> +		return -EINVAL;
> +
> +	if (!phy)
> +		return -ENODEV;
> +
> +	return phy_mii_ioctl(phy, rq, cmd);
> +}
> +
>   static void cpsw_ndo_tx_timeout(struct net_device *ndev)
>   {
>   	struct cpsw_priv *priv = netdev_priv(ndev);
> @@ -670,6 +684,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
>   	.ndo_start_xmit		= cpsw_ndo_start_xmit,
>   	.ndo_change_rx_flags	= cpsw_ndo_change_rx_flags,
>   	.ndo_validate_addr	= eth_validate_addr,
> +	.ndo_do_ioctl		= cpsw_ndo_do_ioctl,
>   	.ndo_change_mtu		= eth_change_mtu,
>   	.ndo_tx_timeout		= cpsw_ndo_tx_timeout,
>   	.ndo_get_stats		= cpsw_ndo_get_stats,

Already ndo_do_ioctl is already implemented. Can you rebase the patch 
with latest git repo
and resubmit the patch

Regards
Mugunthan V N

Re: [PATCH 3/3] net: cpsw: implement ioctl for MII

[Jan Lübbe]

On Mon, 2012-12-03 at 22:34 +0530, Mugunthan V N wrote:
> Already ndo_do_ioctl is already implemented. Can you rebase the patch 
> with latest git repo
> and resubmit the patch

Sorry, I should have checked that before. I'll update the other patches
and resubmit.
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |