From: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: yoshfuji@linux-ipv6.org
Subject: [GIT PULL net-next 06/17] ndisc: Introduce ndisc_send_skb_alloc() for sk_buff allocation.
Date: Tue, 18 Dec 2012 19:54:18 +0900 [thread overview]
Message-ID: <50D04B5A.70207@linux-ipv6.org> (raw)
In-Reply-To: <50CF84A5.7030706@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
---
net/ipv6/ndisc.c | 50 ++++++++++++++++++++++++++------------------------
1 file changed, 26 insertions(+), 24 deletions(-)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index a293676..45ce72c 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -370,6 +370,28 @@ static void pndisc_destructor(struct pneigh_entry *n)
ipv6_dev_mc_dec(dev, &maddr);
}
+static struct sk_buff *ndisc_alloc_skb(struct net_device *dev,
+ int len)
+{
+ int hlen = LL_RESERVED_SPACE(dev);
+ int tlen = dev->needed_tailroom;
+ struct sock *sk = dev_net(dev)->ipv6.ndisc_sk;
+ struct sk_buff *skb;
+ int err;
+
+ skb = sock_alloc_send_skb(sk,
+ hlen + sizeof(struct ipv6hdr) + len + tlen,
+ 1, &err);
+ if (!skb) {
+ ND_PRINTK(0, err, "ndisc: %s failed to allocate an skb, err=%d\n",
+ __func__, err);
+ return NULL;
+ }
+
+ skb_reserve(skb, hlen);
+ return skb;
+}
+
static struct sk_buff *ndisc_build_skb(struct net_device *dev,
const struct in6_addr *daddr,
const struct in6_addr *saddr,
@@ -381,10 +403,7 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev,
struct sock *sk = net->ipv6.ndisc_sk;
struct sk_buff *skb;
struct icmp6hdr *hdr;
- int hlen = LL_RESERVED_SPACE(dev);
- int tlen = dev->needed_tailroom;
int len;
- int err;
u8 *opt;
if (!dev->addr_len)
@@ -394,16 +413,10 @@ static struct sk_buff *ndisc_build_skb(struct net_device *dev,
if (llinfo)
len += ndisc_opt_addr_space(dev);
- skb = sock_alloc_send_skb(sk,
- hlen + sizeof(struct ipv6hdr) + len + tlen,
- 1, &err);
- if (!skb) {
- ND_PRINTK(0, err, "ND: %s failed to allocate an skb, err=%d\n",
- __func__, err);
+ skb = ndisc_alloc_skb(dev, len);
+ if (!skb)
return NULL;
- }
- skb_reserve(skb, hlen);
ip6_nd_hdr(sk, skb, dev, saddr, daddr, IPPROTO_ICMPV6, len);
skb->transport_header = skb->tail;
@@ -1356,9 +1369,7 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target)
struct dst_entry *dst;
struct flowi6 fl6;
u8 *opt;
- int hlen, tlen;
int rd_len;
- int err;
u8 ha_buf[MAX_ADDR_LEN], *ha = NULL;
bool ret;
@@ -1426,19 +1437,10 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target)
rd_len &= ~0x7;
len += rd_len;
- hlen = LL_RESERVED_SPACE(dev);
- tlen = dev->needed_tailroom;
- buff = sock_alloc_send_skb(sk,
- hlen + sizeof(struct ipv6hdr) + len + tlen,
- 1, &err);
- if (buff == NULL) {
- ND_PRINTK(0, err,
- "Redirect: %s failed to allocate an skb, err=%d\n",
- __func__, err);
+ buff = ndisc_alloc_skb(dev, len);
+ if (!buff)
goto release;
- }
- skb_reserve(buff, hlen);
ip6_nd_hdr(sk, buff, dev, &saddr_buf, &ipv6_hdr(skb)->saddr,
IPPROTO_ICMPV6, len);
--
1.7.9.5
next prev parent reply other threads:[~2012-12-18 10:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-17 20:46 [GIT PULL net-next] NDISC Updates (sender-side clean-up) YOSHIFUJI Hideaki
2012-12-17 22:31 ` David Miller
2012-12-18 10:52 ` [GIT PULL net-next 01/17] ndisc: Fix size calculation for headers YOSHIFUJI Hideaki
2012-12-19 0:23 ` David Miller
2012-12-19 0:24 ` David Miller
2012-12-19 3:00 ` YOSHIFUJI Hideaki
2012-12-19 3:08 ` YOSHIFUJI Hideaki
2012-12-18 10:52 ` [GIT PULL net-next 02/17] ipv6: Introduce __ip6_hdr() for setting IPv6 header YOSHIFUJI Hideaki
2012-12-18 10:53 ` [GIT PULL net-next 03/17] ndisc: Introduce struct red_msg for redirect message YOSHIFUJI Hideaki
2012-12-18 10:54 ` [GIT PULL net-next 04/17] ndisc: Introduce ndisc_fill_redirect_hdr_option() YOSHIFUJI Hideaki
2012-12-19 3:08 ` YOSHIFUJI Hideaki
2012-12-19 11:47 ` Bjørn Mork
2012-12-19 16:25 ` YOSHIFUJI Hideaki
2012-12-19 17:27 ` YOSHIFUJI Hideaki
2012-12-18 10:54 ` [GIT PULL net-next 05/17] ndisc: Rename and break up __ndisc_send() YOSHIFUJI Hideaki
2012-12-18 10:54 ` YOSHIFUJI Hideaki [this message]
2012-12-18 10:54 ` [GIT PULL net-next 07/17] ipv6: Move ip6_nd_hdr() to its users' source files YOSHIFUJI Hideaki
2012-12-18 10:54 ` [GIT PULL net-next 08/17] ndisc: Set skb->dev and skb->protocol inside ndisc_alloc_skb() YOSHIFUJI Hideaki
2012-12-18 10:54 ` [GIT PULL net-next 09/17] ndisc: Defer building IPv6 header YOSHIFUJI Hideaki
2012-12-18 10:55 ` [GIT PULL net-next 10/17] ndisc: Reset skb->transport_header inside ndisc_alloc_send_skb() YOSHIFUJI Hideaki
2012-12-18 10:55 ` [GIT PULL net-next 11/17] ndisc: Calculate message body length and option length separately YOSHIFUJI Hideaki
2012-12-18 10:55 ` [GIT PULL net-next 12/17] ndisc: Make ndisc_fill_xxx_option() for sk_buff YOSHIFUJI Hideaki
2012-12-18 10:56 ` [GIT PULL net-next 13/17] ndisc: Calculate checksum and build IPv6 header in __ndisc_send() YOSHIFUJI Hideaki
2012-12-18 10:56 ` [GIT PULL net-next 14/17] ndisc: Concentrate ndisc_send() on sending message YOSHIFUJI Hideaki
2012-12-18 10:56 ` [GIT PULL net-next 15/17] ndisc: Break down ndisc_build_skb() YOSHIFUJI Hideaki
2012-12-18 10:56 ` [GIT PULL net-next 16/17] ndisc: Fill in ND message on skb directly YOSHIFUJI Hideaki
2012-12-18 10:56 ` [GIT PULL net-next 17/17] ndisc: Use return value of __skb_put(), instead of icmp6_hdr() YOSHIFUJI Hideaki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50D04B5A.70207@linux-ipv6.org \
--to=yoshfuji@linux-ipv6.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).