From: Vlad Yasevich <vyasevic@redhat.com>
To: Stephen Hemminger <shemminger@vyatta.com>
Cc: netdev@vger.kernel.org, davem@davemloft.net, stephen@redhat.com,
bridge@lists.linux-foundation.org, shmulik.ladkani@gmail.com,
mst@redhat.com
Subject: Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.
Date: Fri, 11 Jan 2013 12:41:48 -0500 [thread overview]
Message-ID: <50F04EDC.9040309@redhat.com> (raw)
In-Reply-To: <20130111092004.2d55ae65@nehalam.linuxnetplumber.net>
On 01/11/2013 12:20 PM, Stephen Hemminger wrote:
> What I think is the least intrusive and allows for maximum flexibility
> is having the VLAN bridge filtering depend on VLAN support (CONFIG_VLAN_8021Q).
> There already is drivers that depend on that value to enable filtering.
>
The only thing that I see depending on CONFIG_VLAN_8021Q is
CONFIG_VLAN_8021Q_GVRP which is part of the 8021Q support.
There are currently no other drivers depending on 8021Q functionality
and vlan filtering in drivers doesn't depend on 8021Q support in
the kernel.
I admit that I've thought of having a dependency on 8021Q as it would
have allowed me to re-use a bit more code, but decided that bridge
should be able to stand on its own in this regard. 8021Q is not
necessary to turn on VLAN accelerated filtering on the nics as anyone
can do it through the ndo_vlan_rx_add_vid() call.
The reason for this patch was to make the nic vlan filter code reusable
and address Jiri Pirko's comment in the V2 series.
(http://marc.info/?l=linux-netdev&m=135590565719164&w=2). This way,
bridge wouldn't need to make direct ndo_ calls and all call sights will
be consistent.
> And make the support of VLAN filtering in the bridge conditional like
> IGMP snooping is optional
I could certainly make the VLAN filtering conditional, but I am not sure
what it would buy us other then a lot of ifdefs.
Thanks
-vlad
>
> --- a/net/bridge/Kconfig
> +++ b/net/bridge/Kconfig
> @@ -46,3 +46,17 @@ config BRIDGE_IGMP_SNOOPING
> Say N to exclude this support and reduce the binary size.
>
> If unsure, say Y.
> +
> +config BRIDGE_VLAN_FILTERING
> + bool "VLAN filtering"
> + depends on BRIDGE
> + depends on VLAN_8021Q
> + default n
> + ---help---
> + If you say Y here, then the Ethernet bridge will be able to
> + selectively filter traffic based on VLAN tag.
> +
> + Say N to exclude this support and reduce the binary size.
> +
> + If unsure, say Y.
>
next prev parent reply other threads:[~2013-01-11 17:41 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-09 17:17 [PATCH net-next V5 00/14] Add basic VLAN support to bridges Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions Vlad Yasevich
2013-01-10 18:25 ` Stephen Hemminger
2013-01-10 18:41 ` Vlad Yasevich
2013-01-10 22:07 ` Stephen Hemminger
2013-01-11 1:08 ` Vlad Yasevich
2013-01-11 17:20 ` Stephen Hemminger
2013-01-11 17:41 ` Vlad Yasevich [this message]
2013-01-11 18:23 ` Stephen Hemminger
2013-01-11 18:53 ` Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure Vlad Yasevich
2013-01-10 18:36 ` Stephen Hemminger
2013-01-10 19:01 ` Vlad Yasevich
2013-01-10 19:23 ` Vlad Yasevich
2013-01-10 22:10 ` Stephen Hemminger
2013-01-11 1:14 ` Vlad Yasevich
2013-01-11 13:53 ` Shmulik Ladkani
2013-01-11 15:33 ` Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 03/14] bridge: Validate that vlan is permitted on ingress Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 04/14] bridge: Verify that a vlan is allowed to egress on give port Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 05/14] bridge: Cache vlan in the cb for faster egress lookup Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 06/14] bridge: Add vlan to unicast fdb entries Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 07/14] bridge: Add vlan id to multicast groups Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 08/14] bridge: Add netlink interface to configure vlans on bridge ports Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 09/14] bridge: Add vlan support to static neighbors Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 10/14] bridge: Add the ability to configure pvid Vlad Yasevich
2013-01-09 17:17 ` [PATCH 10/14] bridge: Add the ability to pvid Vlad Yasevich
2013-01-09 17:24 ` Vlad Yasevich
2013-01-09 17:17 ` [PATCH net-next v5 11/14] bridge: API to configure egress policy Vlad Yasevich
2013-01-09 17:18 ` [PATCH net-next v5 12/14] bridge: Implement vlan ingress/egress policy Vlad Yasevich
2013-01-09 17:18 ` [PATCH net-next v5 13/14] bridge: Dump vlan information from a bridge port Vlad Yasevich
2013-01-09 17:18 ` [PATCH net-next v5 14/14] bridge: Add vlan support for local fdb entries Vlad Yasevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F04EDC.9040309@redhat.com \
--to=vyasevic@redhat.com \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
--cc=shmulik.ladkani@gmail.com \
--cc=stephen@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).