From: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
To: Erik Hugne <erik.hugne@ericsson.com>,
netdev@vger.kernel.org,
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Subject: Re: [IPv6] interface-local multicast escapes the local node
Date: Thu, 07 Feb 2013 00:32:17 +0900 [thread overview]
Message-ID: <51127781.2000504@linux-ipv6.org> (raw)
In-Reply-To: <20130206134950.GD10290@order.stressinduktion.org>
Hannes Frederic Sowa wrote:
> On Wed, Feb 06, 2013 at 02:07:39PM +0100, Erik Hugne wrote:
>> On Wed, Feb 06, 2013 at 01:12:48PM +0100, Hannes Frederic Sowa wrote:
>>> Fixing the output path should be relatively straightforward, please test
>>> the following patch.
>>
>> Tested OK.
>>
>>> Looking at the input path, I think there is also no input protection
>>> for ff01::/16 addresses from the wire if you bind such an address.
>>
>> Yes, this needs to be filtered on the input side aswell.
>
> This patch should do the trick. Perhaps you could also take it for a test
> drive? Thanks!
>
> [PATCH net-next] ipv6: don't accept node local multicast traffic from the wire
>
> Cc: Erik Hugne <erik.hugne@ericsson.com>
> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
> ---
> net/ipv6/ip6_input.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
> index 4ac5bf3..a2f71d2 100644
> --- a/net/ipv6/ip6_input.c
> +++ b/net/ipv6/ip6_input.c
> @@ -126,6 +126,16 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
> if (ipv6_addr_is_multicast(&hdr->saddr))
> goto err;
>
> + /*
> + * RFC4291 2.7
> + * Interface-Local scope spans only a single interface on a node
> + * and is useful only for loopback transmission of multicast.
> + */
> + if (ipv6_addr_is_multicast(&hdr->daddr) &&
> + IPV6_ADDR_MC_SCOPE(&hdr->daddr) <= IPV6_ADDR_SCOPE_NODELOCAL &&
> + skb->pkt_type != PACKET_LOOPBACK)
> + goto err;
> +
> skb->transport_header = skb->network_header + sizeof(*hdr);
> IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
NAK.
Well, do you have relevant RFC?
RFC4291 says that we should drop ff00::/16, but not ff01::/16.
--yoshfuji
next prev parent reply other threads:[~2013-02-06 15:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 8:49 [IPv6] interface-local multicast escapes the local node Erik Hugne
2013-02-06 12:12 ` Hannes Frederic Sowa
2013-02-06 13:07 ` Erik Hugne
2013-02-06 13:49 ` Hannes Frederic Sowa
2013-02-06 15:06 ` Erik Hugne
2013-02-06 15:12 ` Hannes Frederic Sowa
2013-02-06 15:32 ` YOSHIFUJI Hideaki [this message]
2013-02-06 16:04 ` Hannes Frederic Sowa
2013-02-06 16:18 ` Eric Dumazet
2013-02-06 16:25 ` Hannes Frederic Sowa
2013-02-06 16:49 ` YOSHIFUJI Hideaki
2013-02-07 1:00 ` Hannes Frederic Sowa
2013-02-07 7:28 ` Erik Hugne
2013-02-07 15:41 ` YOSHIFUJI Hideaki
2013-02-06 15:24 ` YOSHIFUJI Hideaki
2013-02-06 16:54 ` Hannes Frederic Sowa
2013-02-09 12:10 ` Hannes Frederic Sowa
2013-02-09 14:12 ` YOSHIFUJI Hideaki
2013-02-09 23:08 ` Hannes Frederic Sowa
2013-02-10 9:59 ` Hannes Frederic Sowa
2013-02-10 10:57 ` YOSHIFUJI Hideaki
2013-02-10 15:32 ` Hannes Frederic Sowa
2013-02-10 18:42 ` YOSHIFUJI Hideaki
2013-02-10 18:49 ` Hannes Frederic Sowa
2013-02-11 11:13 ` [PATCH RFC 1/2] ipv6: introdcue __ipv6_addr_needs_scope_id and ipv6_iface_scope_id helper functions Hannes Frederic Sowa
2013-02-11 13:36 ` YOSHIFUJI Hideaki
2013-02-11 11:13 ` [PATCH RFC 2/2] ipv6: use newly introduced helper functions __ipv6_addr_needs_scope_id and ipv6_iface_scope_id Hannes Frederic Sowa
2013-02-09 15:50 ` [IPv6] interface-local multicast escapes the local node YOSHIFUJI Hideaki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51127781.2000504@linux-ipv6.org \
--to=yoshfuji@linux-ipv6.org \
--cc=erik.hugne@ericsson.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).