Re: [MacVLAN] failure to deliver reassembled IPv6 multicast traffic

[Ben Greear <greearb@candelatech.com>]

On 02/15/2013 11:35 AM, Eric Dumazet wrote:
> On Fri, 2013-02-15 at 11:27 -0800, Ben Greear wrote:
>
>> For some reason I was thinking this wasn't fully fixed for IPv4, but
>> maybe it is..the bug in our internal tracker only mentions IPv6
>> as having issues...
>>
>> We'll do some testing on IPv4 sometime soon to make sure, and can test
>> IPv6 patches as well...
>
> This worries me a bit, as I wrote this patch because you reported the
> issue.

We just did some testing on this on the 3.7.6+ kernel.  IPv4 multicast to
mac-vlans works OK with large packets if there is a single multicast receiver,
but does NOT work if there are multiple multicast receivers (ie, several
mac-vlans with an mcast receive bound to each mvlan).

Our setup also involves routing rules and send-to-self rules,
with sender on the same machine, but I'm not sure that matters
too much or not.

Multiple receivers work fine with smaller packets that do not
need to be segmented.

Thanks,
Ben


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com