netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Jongsung Kim <neidhard.kim@lge.com>
Cc: davem@davemloft.net, peppe.cavallaro@st.com,
	chohnstaedt@innominate.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: net: phy: realtek: add rtl8201f driver
Date: Wed, 08 May 2013 19:43:00 +0400	[thread overview]
Message-ID: <518A7284.4000504@cogentembedded.com> (raw)
In-Reply-To: <201305081910.27203.neidhard.kim@lge.com>

Hello.

On 08-05-2013 14:10, Jongsung Kim wrote:

> This patch adds the minimal driver to manage the
> Realtek RTL8201F 10/100Mbps Transceivers.

> Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
> ---
>   drivers/net/phy/realtek.c |   60 +++++++++++++++++++++++++++++++++++++++-----
>   1 files changed, 53 insertions(+), 7 deletions(-)

> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 8e7af83..27847ca 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -16,9 +16,13 @@
>   #include <linux/phy.h>
>   #include <linux/module.h>
>
> -#define RTL821x_PHYSR		0x11
> -#define RTL821x_PHYSR_DUPLEX	0x2000
> -#define RTL821x_PHYSR_SPEED	0xc000

     Removal of unused #define's is a matter of a separate cleanup patch...

> +/* page 0 register 30 - interrupt indicators and SNR display register */
> +#define RTL8201F_ISR		0x1e
> +/* page 0 register 31 - page select register */
> +#define RTL8201F_PSR		0x1f
> +/* page 7 register 19 - interrupt, WOL enable, and LEDs function register */
> +#define RTL8201F_IER		0x13
> +
>   #define RTL821x_INER		0x12
>   #define RTL821x_INER_INIT	0x6400
>   #define RTL821x_INSR		0x13
> @@ -29,6 +33,15 @@ MODULE_DESCRIPTION("Realtek PHY driver");
>   MODULE_AUTHOR("Johnson Leung");
>   MODULE_LICENSE("GPL");
>
> +static int rtl8201f_ack_interrupt(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	err = phy_read(phydev, RTL8201F_ISR);

    This could be an initializer and so make the function shorter.

> +
> +	return (err < 0) ? err : 0;
> +}
> +
>   static int rtl821x_ack_interrupt(struct phy_device *phydev)
>   {
>   	int err;
[...]
> @@ -96,16 +141,16 @@ static struct phy_driver rtl8211e_driver = {
>
>   static int __init realtek_init(void)
>   {
> -	int ret;
> -
> -	ret = phy_driver_register(&rtl8211b_driver);
> -	if (ret < 0)
> +	if(phy_driver_register(&rtl8201f_driver) < 0)
> +		return -ENODEV;
> +	if(phy_driver_register(&rtl8211b_driver) < 0)

     You haven't run this patch thru scripts/checkpatch.pl -- there 
should be a space between *if* and (.

WBR, Sergei

  parent reply	other threads:[~2013-05-08 15:43 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-08 10:10 net: phy: realtek: add rtl8201f driver Jongsung Kim
2013-05-08 10:41 ` Francois Romieu
2013-05-09  2:26   ` Jongsung Kim
2013-05-08 15:43 ` Sergei Shtylyov [this message]
2013-05-09  2:35   ` Jongsung Kim
2013-05-09 16:58     ` Sergei Shtylyov
2013-05-10  3:44       ` Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 1/4] net: phy: realtek: simplify multiple drivers registration Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 2/4] net: phy: realtek: add support for the RTL8201F Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 3/4] net: phy: realtek: add suspend/resume handlers for the RTL8211B Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 4/4] net: phy: realtek: cleanup code Jongsung Kim
2013-05-10 11:18   ` Sergei Shtylyov
2013-05-13  2:48     ` Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 1/4] net: phy: realtek: simplify multiple drivers registration Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 2/4] net: phy: realtek: add support for the RTL8201F Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 3/4] net: phy: realtek: add suspend/resume handlers for the RTL8211B Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 4/4] net: phy: realtek: cleanup code Jongsung Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=518A7284.4000504@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=chohnstaedt@innominate.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neidhard.kim@lge.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).