Re: [PATCH V3] rtlwifi: rtl8192cu: Add new USB ID

[Larry Finger <Larry.Finger@lwfinger.net>]

On 05/15/2013 03:23 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 05/15/2013 07:03 PM, Larry Finger wrote:
>
>> From: Albert Pool <albertpool@solcon.nl>
>>
>> This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M.
>>
>> Signed-off-by: Albert Pool <albertpool@solcon.nl>
>> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
>> Reported-by: Ana Rey <Anazul77@hotmail.com>
>> ---
>>
>> John,
>>
>> Please use this version. V2 still had some whitespace errors that I fixed.
>>
>> Albert,
>>
>> Please use scripts/checkpatch.pl to check the patch before you send it.
>>
>> Thanks,
>>
>> Larry
>> ---
>>
>>   drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
>> b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
>> index 23d640a..18da6de 100644
>> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
>> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
>> @@ -349,6 +349,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
>>       {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
>>       {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
>>       {RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
>> +    {RTL_USB_DEVICE(0x0846, 0xf001, rtl92cu_hal_cfg)}, /*On Netwrks N300MA*/
>
>     "Networks", perhaps? Or does it hit 80 columns limit this way?

That is exactly the problem. I suppose I could allow one line to be 81 
characters in length, but that would diminish the effectiveness of my suggestion 
that checkpatch be used.

Thanks for noticing. At least someone is reading the patches.

Larry