From: Vlad Yasevich <vyasevic@redhat.com>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: netdev@vger.kernel.org
Subject: Re: [PATCH] macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
Date: Wed, 14 Aug 2013 10:07:01 -0400 [thread overview]
Message-ID: <520B8F05.6060402@redhat.com> (raw)
In-Reply-To: <20130814121043.GH5430@redhat.com>
On 08/14/2013 08:10 AM, Michael S. Tsirkin wrote:
> On Tue, Aug 13, 2013 at 01:55:58PM -0400, Vlad Yasevich wrote:
>> When the user turns off IFF_VNET_HDR flag, attempts to change
>> offload features via TUNSETOFFLOAD do not work. This could cause
>> GSO packets to be delivered to the user when the user is
>> not prepared to handle them.
>>
>> To solve, allow processing of TUNSETOFFLOAD when IFF_VNET_HDR is
>> disabled and make sure to turn off all offloads in this case.
>> Also, when IFF_VNET_HDR is disabled, run throught the offload change
>> as well to make sure that the functionality is not dependent on
>> the order of the ioclt() calls.
>>
>> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
>
> Hmm, this seems to make it even messier.
> So
> set TUNSETOFFLOAD
> clear IFF_VNET_HDR
> set IFF_VNET_HDR
>
> offloads are now clear?
>
> I'm also not sure userspace that sets offloads but clears
> vnet hdr knows what it's doing.
>
> How about we fail attempts to clear vnet hdr
> unless offloads are disabled?
>
OK. That makes it simpler...
-vlad
>
>
>
>> ---
>> drivers/net/macvtap.c | 27 +++++++++++++++++++--------
>> 1 file changed, 19 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
>> index a98fb0e..076b9e7 100644
>> --- a/drivers/net/macvtap.c
>> +++ b/drivers/net/macvtap.c
>> @@ -1019,6 +1019,7 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg)
>> struct macvlan_dev *vlan;
>> netdev_features_t features;
>> netdev_features_t feature_mask = 0;
>> + netdev_features_t tap_mask = TUN_OFFLOADS;
>>
>> vlan = rtnl_dereference(q->vlan);
>> if (!vlan)
>> @@ -1026,7 +1027,12 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg)
>>
>> features = vlan->dev->features;
>>
>> - if (arg & TUN_F_CSUM) {
>> + if (!(q->flags & IFF_VNET_HDR)) {
>> + /* Turn off all checsum offloading also if user does
>> + * not user vnet_hdr.
>
> Does not set?
>
>> + */
>> + tap_mask |= NETIF_F_ALL_CSUM;
>> + } else if (arg & TUN_F_CSUM) {
>> feature_mask = NETIF_F_HW_CSUM;
>>
>> if (arg & (TUN_F_TSO4 | TUN_F_TSO6)) {
>> @@ -1058,8 +1064,7 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg)
>> /* tap_features are the same as features on tun/tap and
>> * reflect user expectations.
>> */
>> - vlan->tap_features = vlan->dev->features &
>> - (feature_mask | ~TUN_OFFLOADS);
>> + vlan->tap_features = vlan->dev->features & (feature_mask | ~tap_mask);
>> vlan->set_features = features;
>> netdev_update_features(vlan->dev);
>>
>> @@ -1092,8 +1097,18 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
>> if ((u & ~(IFF_VNET_HDR | IFF_MULTI_QUEUE)) !=
>> (IFF_NO_PI | IFF_TAP))
>> ret = -EINVAL;
>> - else
>> + else {
>> + if ((q->flags ^ u) & IFF_VNET_HDR) {
>> + /* vnet_hdr support impacts the offloads,
>> + * so we need to run throught the offload
>
> throught ?
>
>> + * change.
>> + */
>> + rtnl_lock();
>> + ret = set_offload(q, 0);
>> + rtnl_unlock();
>> + }
>> q->flags = u;
>> + }
>>
>> return ret;
>>
>> @@ -1155,10 +1170,6 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
>> TUN_F_TSO_ECN | TUN_F_UFO))
>> return -EINVAL;
>>
>> - /* TODO: only accept frames with the features that
>> - got enabled for forwarded frames */
>> - if (!(q->flags & IFF_VNET_HDR))
>> - return -EINVAL;
>> rtnl_lock();
>> ret = set_offload(q, arg);
>> rtnl_unlock();
>> --
>> 1.8.1.4
next prev parent reply other threads:[~2013-08-14 14:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 17:55 [PATCH] macvtap: Correctly set tap features when IFF_VNET_HDR is disabled Vlad Yasevich
2013-08-13 18:05 ` Sergei Shtylyov
2013-08-14 12:10 ` Michael S. Tsirkin
2013-08-14 14:07 ` Vlad Yasevich [this message]
2013-08-14 16:04 ` Vlad Yasevich
2013-08-14 17:43 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520B8F05.6060402@redhat.com \
--to=vyasevic@redhat.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).