From: Amir Vadai <amirv.mellanox@gmail.com>
To: Joe Perches <joe@perches.com>
Cc: Amir Vadai <amirv@mellanox.com>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, Eugenia Emantayev <eugenia@mellanox.com>
Subject: Re: [PATCH net-next V1 1/4] net/mlx4_en: Disable global flow control when PFC enabled
Date: Wed, 21 Aug 2013 10:10:53 +0300 [thread overview]
Message-ID: <521467FD.2020203@gmail.com> (raw)
In-Reply-To: <1377017880.2016.49.camel@joe-AO722>
On 20/08/2013 19:58, Joe Perches wrote:
> On Tue, 2013-08-20 at 18:42 +0300, Amir Vadai wrote:
>> Fix a bug when FC and PFC are enabled/disabled at the same time.
>> According to ConnectX-3 Programmer Manual these two features are mutial
>> exclusive. So make sure when enabling PFC to turn off global FC and
>> vise versa. Otherwise it hurts the performance.
> []
>> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
>> index 9d4a1ea..fcef764 100644
>> --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
>> +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
>> @@ -169,7 +169,8 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev,
>> pfc->mbc,
>> pfc->delay);
>>
>> - priv->prof->rx_pause = priv->prof->tx_pause = !!pfc->pfc_en;
>> + priv->prof->rx_pause = !pfc->pfc_en;
>> + priv->prof->tx_pause = !pfc->pfc_en;
>> priv->prof->rx_ppp = priv->prof->tx_ppp = pfc->pfc_en;
>
> Just do the minimal change.
>
> Otherwise, because you're using separate sets for the
> pause vars I think you should change the line below as
> well so a single style is used.
>
> Maybe I'd just go ahead and use a temporary for prof too.
> ---
> drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
> index 9d4a1ea..45894c6 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
> @@ -161,6 +161,7 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev,
> {
> struct mlx4_en_priv *priv = netdev_priv(dev);
> struct mlx4_en_dev *mdev = priv->mdev;
> + struct mlx4_en_port_profile *prof = priv->prof;
> int err;
>
> en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n",
> @@ -169,15 +170,17 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev,
> pfc->mbc,
> pfc->delay);
>
> - priv->prof->rx_pause = priv->prof->tx_pause = !!pfc->pfc_en;
> - priv->prof->rx_ppp = priv->prof->tx_ppp = pfc->pfc_en;
> + prof->rx_pause = !pfc->pfc_en;
> + prof->tx_pause = !pfc->pfc_en;
> + prof->rx_ppp = pfc->pfc_en;
> + prof->tx_ppp = pfc->pfc_en;
>
> err = mlx4_SET_PORT_general(mdev->dev, priv->port,
> priv->rx_skb_size + ETH_FCS_LEN,
> - priv->prof->tx_pause,
> - priv->prof->tx_ppp,
> - priv->prof->rx_pause,
> - priv->prof->rx_ppp);
> + prof->tx_pause,
> + prof->tx_ppp,
> + prof->rx_pause,
> + prof->rx_ppp);
> if (err)
> en_err(priv, "Failed setting pause params\n");
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Did as you suggested.
Thanks,
Amir
next prev parent reply other threads:[~2013-08-21 7:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-20 15:42 [PATCH net-next V1 0/4] Mellanox driver updates 2013-08-19 Amir Vadai
2013-08-20 15:42 ` [PATCH net-next V1 1/4] net/mlx4_en: Disable global flow control when PFC enabled Amir Vadai
2013-08-20 16:58 ` Joe Perches
2013-08-21 7:10 ` Amir Vadai [this message]
2013-08-20 15:42 ` [PATCH net-next V1 2/4] net/mlx4_en: Notify user when TX ring in error state Amir Vadai
2013-08-20 15:42 ` [PATCH net-next V1 3/4] net/mlx4_en: Fix handling of dma_map failure Amir Vadai
2013-08-20 15:42 ` [PATCH net-next V1 4/4] net/mlx4_en: Reduce scope of local variables in mlx4_en_xmit Amir Vadai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521467FD.2020203@gmail.com \
--to=amirv.mellanox@gmail.com \
--cc=amirv@mellanox.com \
--cc=davem@davemloft.net \
--cc=eugenia@mellanox.com \
--cc=joe@perches.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).