[PATCH v2 0/5] cpsw: support for control module register

[PATCH v2 0/5] cpsw: support for control module register

[Daniel Mack]

v1 -> v2:
	* combine devm_request_mem_region() and devm_ioremap() and use
	  devm_ioremap_resource() (reported by Sergei Shtylyov)
	* fix multi-line comment style (reported by Sergei Shtylyov)
	* fix ti,rmii-clock-ext property name (reported by Sekhar)
	* rebased to net-next (reported by Mugunthan V N, David Miller)
	* add a new compatible type, and handle AM33xx specific
	  registers that way (reported by Sekhar)
	* move gmii_sel_reg modifications to the open routine
	  (reported by Mugunthan V N)


Daniel Mack (5):
  net: ethernet: cpsw: switch to devres allocations
  net: ethernet: cpsw: add optional third memory region for CONTROL
    module
  net: ethernet: cpsw: introduce ti,am3352-cpsw compatible string
  net: ethernet: cpsw: add support for hardware interface mode config
  ARM: dts: am33xx: adopt to cpsw changes

 Documentation/devicetree/bindings/net/cpsw.txt |  10 +-
 arch/arm/boot/dts/am33xx.dtsi                  |   5 +-
 drivers/net/ethernet/ti/cpsw.c                 | 254 ++++++++++++++-----------
 drivers/net/ethernet/ti/cpsw.h                 |   2 +
 4 files changed, 159 insertions(+), 112 deletions(-)

-- 
1.8.3.1

[PATCH v2 1/5] net: ethernet: cpsw: switch to devres allocations

[Daniel Mack]

This patch cleans up the allocation and error unwind paths, which
allows us to carry less information in struct cpsw_priv and reduce the
amount of jump labels in the probe functions.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 drivers/net/ethernet/ti/cpsw.c | 145 +++++++++++++----------------------------
 1 file changed, 44 insertions(+), 101 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 79974e3..1a91aac 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -367,8 +367,6 @@ struct cpsw_priv {
 	spinlock_t			lock;
 	struct platform_device		*pdev;
 	struct net_device		*ndev;
-	struct resource			*cpsw_res;
-	struct resource			*cpsw_wr_res;
 	struct napi_struct		napi;
 	struct device			*dev;
 	struct cpsw_platform_data	data;
@@ -1712,62 +1710,55 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 
 	if (of_property_read_u32(node, "active_slave", &prop)) {
 		pr_err("Missing active_slave property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->active_slave = prop;
 
 	if (of_property_read_u32(node, "cpts_clock_mult", &prop)) {
 		pr_err("Missing cpts_clock_mult property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->cpts_clock_mult = prop;
 
 	if (of_property_read_u32(node, "cpts_clock_shift", &prop)) {
 		pr_err("Missing cpts_clock_shift property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->cpts_clock_shift = prop;
 
-	data->slave_data = kcalloc(data->slaves, sizeof(struct cpsw_slave_data),
-				   GFP_KERNEL);
+	data->slave_data = devm_kzalloc(&pdev->dev, data->slaves
+					* sizeof(struct cpsw_slave_data),
+					GFP_KERNEL);
 	if (!data->slave_data)
-		return -EINVAL;
+		return -ENOMEM;
 
 	if (of_property_read_u32(node, "cpdma_channels", &prop)) {
 		pr_err("Missing cpdma_channels property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->channels = prop;
 
 	if (of_property_read_u32(node, "ale_entries", &prop)) {
 		pr_err("Missing ale_entries property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->ale_entries = prop;
 
 	if (of_property_read_u32(node, "bd_ram_size", &prop)) {
 		pr_err("Missing bd_ram_size property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->bd_ram_size = prop;
 
 	if (of_property_read_u32(node, "rx_descs", &prop)) {
 		pr_err("Missing rx_descs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->rx_descs = prop;
 
 	if (of_property_read_u32(node, "mac_control", &prop)) {
 		pr_err("Missing mac_control property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
+		return -EINVAL;
 	}
 	data->mac_control = prop;
 
@@ -1794,8 +1785,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		parp = of_get_property(slave_node, "phy_id", &lenp);
 		if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
 			pr_err("Missing slave[%d] phy_id property\n", i);
-			ret = -EINVAL;
-			goto error_ret;
+			return -EINVAL;
 		}
 		mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
 		phyid = be32_to_cpup(parp+1);
@@ -1825,10 +1815,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 	}
 
 	return 0;
-
-error_ret:
-	kfree(data->slave_data);
-	return ret;
 }
 
 static int cpsw_probe_dual_emac(struct platform_device *pdev,
@@ -1870,7 +1856,6 @@ static int cpsw_probe_dual_emac(struct platform_device *pdev,
 	priv_sl2->coal_intvl = 0;
 	priv_sl2->bus_freq_mhz = priv->bus_freq_mhz;
 
-	priv_sl2->cpsw_res = priv->cpsw_res;
 	priv_sl2->regs = priv->regs;
 	priv_sl2->host_port = priv->host_port;
 	priv_sl2->host_port_regs = priv->host_port_regs;
@@ -1914,8 +1899,8 @@ static int cpsw_probe(struct platform_device *pdev)
 	struct cpsw_priv		*priv;
 	struct cpdma_params		dma_params;
 	struct cpsw_ale_params		ale_params;
-	void __iomem			*ss_regs, *wr_regs;
-	struct resource			*res;
+	void __iomem			*ss_regs;
+	struct resource			*res, *ss_res;
 	u32 slave_offset, sliver_offset, slave_size;
 	int ret = 0, i, k = 0;
 
@@ -1951,7 +1936,7 @@ static int cpsw_probe(struct platform_device *pdev)
 	if (cpsw_probe_dt(&priv->data, pdev)) {
 		pr_err("cpsw: platform data missing\n");
 		ret = -ENODEV;
-		goto clean_ndev_ret;
+		goto clean_runtime_disable_ret;
 	}
 	data = &priv->data;
 
@@ -1965,11 +1950,12 @@ static int cpsw_probe(struct platform_device *pdev)
 
 	memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
 
-	priv->slaves = kzalloc(sizeof(struct cpsw_slave) * data->slaves,
-			       GFP_KERNEL);
+	priv->slaves =
+		devm_kzalloc(&pdev->dev, sizeof(struct cpsw_slave) * data->slaves,
+			     GFP_KERNEL);
 	if (!priv->slaves) {
-		ret = -EBUSY;
-		goto clean_ndev_ret;
+		ret = -ENOMEM;
+		goto clean_runtime_disable_ret;
 	}
 	for (i = 0; i < data->slaves; i++)
 		priv->slaves[i].slave_num = i;
@@ -1977,55 +1963,41 @@ static int cpsw_probe(struct platform_device *pdev)
 	priv->slaves[0].ndev = ndev;
 	priv->emac_port = 0;
 
-	priv->clk = clk_get(&pdev->dev, "fck");
+	priv->clk = devm_clk_get(&pdev->dev, "fck");
 	if (IS_ERR(priv->clk)) {
-		dev_err(&pdev->dev, "fck is not found\n");
+		dev_err(priv->dev, "fck is not found\n");
 		ret = -ENODEV;
-		goto clean_slave_ret;
+		goto clean_runtime_disable_ret;
 	}
 	priv->coal_intvl = 0;
 	priv->bus_freq_mhz = clk_get_rate(priv->clk) / 1000000;
 
-	priv->cpsw_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!priv->cpsw_res) {
+	ss_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ss_res) {
 		dev_err(priv->dev, "error getting i/o resource\n");
 		ret = -ENOENT;
-		goto clean_clk_ret;
+		goto clean_runtime_disable_ret;
 	}
-	if (!request_mem_region(priv->cpsw_res->start,
-				resource_size(priv->cpsw_res), ndev->name)) {
-		dev_err(priv->dev, "failed request i/o region\n");
-		ret = -ENXIO;
-		goto clean_clk_ret;
-	}
-	ss_regs = ioremap(priv->cpsw_res->start, resource_size(priv->cpsw_res));
+	ss_regs = devm_ioremap_resource(&pdev->dev, ss_res);
 	if (!ss_regs) {
 		dev_err(priv->dev, "unable to map i/o region\n");
-		goto clean_cpsw_iores_ret;
+		goto clean_runtime_disable_ret;
 	}
 	priv->regs = ss_regs;
 	priv->version = __raw_readl(&priv->regs->id_ver);
 	priv->host_port = HOST_PORT_NUM;
 
-	priv->cpsw_wr_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!priv->cpsw_wr_res) {
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
 		dev_err(priv->dev, "error getting i/o resource\n");
 		ret = -ENOENT;
-		goto clean_iomap_ret;
-	}
-	if (!request_mem_region(priv->cpsw_wr_res->start,
-			resource_size(priv->cpsw_wr_res), ndev->name)) {
-		dev_err(priv->dev, "failed request i/o region\n");
-		ret = -ENXIO;
-		goto clean_iomap_ret;
+		goto clean_runtime_disable_ret;
 	}
-	wr_regs = ioremap(priv->cpsw_wr_res->start,
-				resource_size(priv->cpsw_wr_res));
-	if (!wr_regs) {
+	priv->wr_regs = devm_ioremap_resource(&pdev->dev, res);
+	if (!priv->wr_regs) {
 		dev_err(priv->dev, "unable to map i/o region\n");
-		goto clean_cpsw_wr_iores_ret;
+		goto clean_runtime_disable_ret;
 	}
-	priv->wr_regs = wr_regs;
 
 	memset(&dma_params, 0, sizeof(dma_params));
 	memset(&ale_params, 0, sizeof(ale_params));
@@ -2056,12 +2028,12 @@ static int cpsw_probe(struct platform_device *pdev)
 		slave_size           = CPSW2_SLAVE_SIZE;
 		sliver_offset        = CPSW2_SLIVER_OFFSET;
 		dma_params.desc_mem_phys =
-			(u32 __force) priv->cpsw_res->start + CPSW2_BD_OFFSET;
+			(u32 __force) ss_res->start + CPSW2_BD_OFFSET;
 		break;
 	default:
 		dev_err(priv->dev, "unknown version 0x%08x\n", priv->version);
 		ret = -ENODEV;
-		goto clean_cpsw_wr_iores_ret;
+		goto clean_runtime_disable_ret;
 	}
 	for (i = 0; i < priv->data.slaves; i++) {
 		struct cpsw_slave *slave = &priv->slaves[i];
@@ -2089,7 +2061,7 @@ static int cpsw_probe(struct platform_device *pdev)
 	if (!priv->dma) {
 		dev_err(priv->dev, "error initializing dma\n");
 		ret = -ENOMEM;
-		goto clean_wr_iomap_ret;
+		goto clean_runtime_disable_ret;
 	}
 
 	priv->txch = cpdma_chan_create(priv->dma, tx_chan_num(0),
@@ -2124,8 +2096,8 @@ static int cpsw_probe(struct platform_device *pdev)
 
 	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
 		for (i = res->start; i <= res->end; i++) {
-			if (request_irq(i, cpsw_interrupt, 0,
-					dev_name(&pdev->dev), priv)) {
+			if (devm_request_irq(&pdev->dev, i, cpsw_interrupt, 0,
+					     dev_name(priv->dev), priv)) {
 				dev_err(priv->dev, "error attaching irq\n");
 				goto clean_ale_ret;
 			}
@@ -2147,7 +2119,7 @@ static int cpsw_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(priv->dev, "error registering net device\n");
 		ret = -ENODEV;
-		goto clean_irq_ret;
+		goto clean_ale_ret;
 	}
 
 	if (cpts_register(&pdev->dev, priv->cpts,
@@ -2155,44 +2127,27 @@ static int cpsw_probe(struct platform_device *pdev)
 		dev_err(priv->dev, "error registering cpts device\n");
 
 	cpsw_notice(priv, probe, "initialized device (regs %x, irq %d)\n",
-		  priv->cpsw_res->start, ndev->irq);
+		    ss_res->start, ndev->irq);
 
 	if (priv->data.dual_emac) {
 		ret = cpsw_probe_dual_emac(pdev, priv);
 		if (ret) {
 			cpsw_err(priv, probe, "error probe slave 2 emac interface\n");
-			goto clean_irq_ret;
+			goto clean_ale_ret;
 		}
 	}
 
 	return 0;
 
-clean_irq_ret:
-	for (i = 0; i < priv->num_irqs; i++)
-		free_irq(priv->irqs_table[i], priv);
 clean_ale_ret:
 	cpsw_ale_destroy(priv->ale);
 clean_dma_ret:
 	cpdma_chan_destroy(priv->txch);
 	cpdma_chan_destroy(priv->rxch);
 	cpdma_ctlr_destroy(priv->dma);
-clean_wr_iomap_ret:
-	iounmap(priv->wr_regs);
-clean_cpsw_wr_iores_ret:
-	release_mem_region(priv->cpsw_wr_res->start,
-			   resource_size(priv->cpsw_wr_res));
-clean_iomap_ret:
-	iounmap(priv->regs);
-clean_cpsw_iores_ret:
-	release_mem_region(priv->cpsw_res->start,
-			   resource_size(priv->cpsw_res));
-clean_clk_ret:
-	clk_put(priv->clk);
-clean_slave_ret:
+clean_runtime_disable_ret:
 	pm_runtime_disable(&pdev->dev);
-	kfree(priv->slaves);
 clean_ndev_ret:
-	kfree(priv->data.slave_data);
 	free_netdev(priv->ndev);
 	return ret;
 }
@@ -2201,30 +2156,18 @@ static int cpsw_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct cpsw_priv *priv = netdev_priv(ndev);
-	int i;
 
 	if (priv->data.dual_emac)
 		unregister_netdev(cpsw_get_slave_ndev(priv, 1));
 	unregister_netdev(ndev);
 
 	cpts_unregister(priv->cpts);
-	for (i = 0; i < priv->num_irqs; i++)
-		free_irq(priv->irqs_table[i], priv);
 
 	cpsw_ale_destroy(priv->ale);
 	cpdma_chan_destroy(priv->txch);
 	cpdma_chan_destroy(priv->rxch);
 	cpdma_ctlr_destroy(priv->dma);
-	iounmap(priv->regs);
-	release_mem_region(priv->cpsw_res->start,
-			   resource_size(priv->cpsw_res));
-	iounmap(priv->wr_regs);
-	release_mem_region(priv->cpsw_wr_res->start,
-			   resource_size(priv->cpsw_wr_res));
 	pm_runtime_disable(&pdev->dev);
-	clk_put(priv->clk);
-	kfree(priv->slaves);
-	kfree(priv->data.slave_data);
 	if (priv->data.dual_emac)
 		free_netdev(cpsw_get_slave_ndev(priv, 1));
 	free_netdev(ndev);
-- 
1.8.3.1

[PATCH v2 2/5] net: ethernet: cpsw: add optional third memory region for CONTROL module

[Daniel Mack]

At least the AM33xx SoC has a control module register to configure
details such as the hardware ethernet interface mode.

I'm not sure whether all SoCs which feature the cpsw block have such a
register, so that third memory region is considered optional for now.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |  5 ++++-
 drivers/net/ethernet/ti/cpsw.c                 | 16 ++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 05d660e..4e5ca54 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -4,7 +4,10 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
 Required properties:
 - compatible		: Should be "ti,cpsw"
 - reg			: physical base address and size of the cpsw
-			  registers map
+			  registers map.
+			  An optional third memory region can be supplied if
+			  the platform has a control module register to
+			  configure phy interface details
 - interrupts		: property with a value describing the interrupt
 			  number
 - interrupt-parent	: The parent interrupt controller
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1a91aac..bd0b664 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -372,6 +372,7 @@ struct cpsw_priv {
 	struct cpsw_platform_data	data;
 	struct cpsw_ss_regs __iomem	*regs;
 	struct cpsw_wr_regs __iomem	*wr_regs;
+	u32 __iomem			*gmii_sel_reg;
 	u8 __iomem			*hw_stats;
 	struct cpsw_host_regs __iomem	*host_port_regs;
 	u32				msg_enable;
@@ -1999,6 +2000,21 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_runtime_disable_ret;
 	}
 
+	/* If the control memory region is unspecified, continue without it.
+	 * If it is specified, but we're unable to reserve it, bail.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!res) {
+		dev_err(priv->dev, "error getting control i/o resource\n");
+		goto no_gmii_sel;
+	}
+	priv->gmii_sel_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (!priv->gmii_sel_reg) {
+		dev_err(priv->dev, "unable to map control i/o region\n");
+		goto clean_runtime_disable_ret;
+	}
+
+no_gmii_sel:
 	memset(&dma_params, 0, sizeof(dma_params));
 	memset(&ale_params, 0, sizeof(ale_params));
 
-- 
1.8.3.1

Re: [PATCH v2 2/5] net: ethernet: cpsw: add optional third memory region for CONTROL module

[Sergei Shtylyov]

Hello.

On 23-08-2013 12:43, Daniel Mack wrote:

> At least the AM33xx SoC has a control module register to configure
> details such as the hardware ethernet interface mode.

> I'm not sure whether all SoCs which feature the cpsw block have such a
> register, so that third memory region is considered optional for now.

> Signed-off-by: Daniel Mack <zonque@gmail.com>
[...]

> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 1a91aac..bd0b664 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
[...]
> @@ -1999,6 +2000,21 @@ static int cpsw_probe(struct platform_device *pdev)
>   		goto clean_runtime_disable_ret;
>   	}
>
> +	/* If the control memory region is unspecified, continue without it.
> +	 * If it is specified, but we're unable to reserve it, bail.
> +	 */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +	if (!res) {
> +		dev_err(priv->dev, "error getting control i/o resource\n");

    If the resource is optional, why use dev_err()?

> +		goto no_gmii_sel;
> +	}
> +	priv->gmii_sel_reg = devm_ioremap_resource(&pdev->dev, res);
> +	if (!priv->gmii_sel_reg) {

    devm_ioremap_resource() doesn't return NULL, it returns error, so you 
should check with IS_ERR() and propagate the error to the caller with PTR_ERR().

> +		dev_err(priv->dev, "unable to map control i/o region\n");

    devm_ioremap_resource() prints out the error messages itself, so you don't 
have to.

> +		goto clean_runtime_disable_ret;
> +	}
> +
> +no_gmii_sel:
>   	memset(&dma_params, 0, sizeof(dma_params));
>   	memset(&ale_params, 0, sizeof(ale_params));

WBR, Sergei

Re: [PATCH v2 2/5] net: ethernet: cpsw: add optional third memory region for CONTROL module

[Daniel Mack]

On 23.08.2013 16:03, Sergei Shtylyov wrote:
> On 23-08-2013 12:43, Daniel Mack wrote:

>> +		dev_err(priv->dev, "unable to map control i/o region\n");
> 
>     devm_ioremap_resource() prints out the error messages itself, so you don't 
> have to.

Right. Thanks. Will send a v4.



Best,
Daniel

[PATCH v2 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw compatible string

[Daniel Mack]

In order to support features that are specific to the AM335x IP, we have
to add hardware types and another compatible string.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |  3 ++-
 drivers/net/ethernet/ti/cpsw.c                 | 32 ++++++++++++++++++++------
 drivers/net/ethernet/ti/cpsw.h                 |  1 +
 3 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 4e5ca54..b717458 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -2,7 +2,8 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
 ------------------------------------------------------
 
 Required properties:
-- compatible		: Should be "ti,cpsw"
+- compatible		: Should be "ti,cpsw" for generic cpsw support, or
+			  "ti,am3352-cpsw" for AM3352 SoCs
 - reg			: physical base address and size of the cpsw
 			  registers map.
 			  An optional third memory region can be supplied if
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index bd0b664..2e19de0 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -155,6 +155,11 @@ do {								\
 		((priv->data.dual_emac) ? priv->emac_port :	\
 		priv->data.active_slave)
 
+enum {
+	CPSW_TYPE_GENERIC,
+	CPSW_TYPE_AM33XX
+};
+
 static int debug_level;
 module_param(debug_level, int, 0);
 MODULE_PARM_DESC(debug_level, "cpsw debug level (NETIF_MSG bits)");
@@ -1692,17 +1697,36 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
 	slave->port_vlan = data->dual_emac_res_vlan;
 }
 
+static const struct of_device_id cpsw_of_mtable[] = {
+	{
+		.compatible	= "ti,cpsw",
+		.data		= (void *) CPSW_TYPE_GENERIC
+	}, {
+		.compatible	= "ti,am3352-cpsw",
+		.data		= (void *) CPSW_TYPE_AM33XX
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cpsw_of_mtable);
+
 static int cpsw_probe_dt(struct cpsw_platform_data *data,
 			 struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
 	struct device_node *slave_node;
+	unsigned long match_data;
 	int i = 0, ret;
 	u32 prop;
 
-	if (!node)
+	match = of_match_device(cpsw_of_mtable, &pdev->dev);
+
+	if (!node || !match)
 		return -EINVAL;
 
+	match_data = (unsigned long) match->data;
+	data->hw_type = match_data;
+
 	if (of_property_read_u32(node, "slaves", &prop)) {
 		pr_err("Missing slaves property in the DT.\n");
 		return -EINVAL;
@@ -2228,12 +2252,6 @@ static const struct dev_pm_ops cpsw_pm_ops = {
 	.resume		= cpsw_resume,
 };
 
-static const struct of_device_id cpsw_of_mtable[] = {
-	{ .compatible = "ti,cpsw", },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, cpsw_of_mtable);
-
 static struct platform_driver cpsw_driver = {
 	.driver = {
 		.name	 = "cpsw",
diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h
index eb3e101..96c374a 100644
--- a/drivers/net/ethernet/ti/cpsw.h
+++ b/drivers/net/ethernet/ti/cpsw.h
@@ -37,6 +37,7 @@ struct cpsw_platform_data {
 	u32	mac_control;	/* Mac control register */
 	u16	default_vlan;	/* Def VLAN for ALE lookup in VLAN aware mode*/
 	bool	dual_emac;	/* Enable Dual EMAC mode */
+	u32	hw_type;	/* hardware type as specified in 'compatible' */
 };
 
 #endif /* __CPSW_H__ */
-- 
1.8.3.1

[PATCH v2 4/5] net: ethernet: cpsw: add support for hardware interface mode config

[Daniel Mack]

The cpsw currently lacks code to properly set up the hardware interface
mode on AM33xx. Other platforms might be equally affected.

Usually, the bootloader will configure the control module register, so
probably that's why such support wasn't needed in the past. In suspend
mode though, this register is modified, and so it needs reprogramming
after resume.

This patch adds code that makes use of the previously added and optional
support for passing the control mode register, and configures the
correct register bits when the slave is opened.

The AM33xx also has a bit for each slave to configure the RMII reference
clock direction. Setting it is now supported by a per-slave DT property.

This code path introducted by this patch is currently exclusive for
am33xx.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |  2 +
 drivers/net/ethernet/ti/cpsw.c                 | 61 ++++++++++++++++++++++++++
 drivers/net/ethernet/ti/cpsw.h                 |  1 +
 3 files changed, 64 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index b717458..0895a51 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -34,6 +34,8 @@ Required properties:
 - phy_id		: Specifies slave phy id
 - phy-mode		: The interface between the SoC and the PHY (a string
 			  that of_get_phy_mode() can understand)
+- ti,rmii-clock-ext	: If present, the driver will configure the RMII
+			  interface to external clock usage
 - mac-address		: Specifies slave MAC address
 
 Optional properties:
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 2e19de0..6e36f49 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -138,6 +138,13 @@ do {								\
 #define CPSW_CMINTMAX_INTVL	(1000 / CPSW_CMINTMIN_CNT)
 #define CPSW_CMINTMIN_INTVL	((1000 / CPSW_CMINTMAX_CNT) + 1)
 
+#define AM33XX_GMII_SEL_MODE_MII	(0)
+#define AM33XX_GMII_SEL_MODE_RMII	(1)
+#define AM33XX_GMII_SEL_MODE_RGMII	(2)
+
+#define AM33XX_GMII_SEL_RMII2_IO_CLK_EN	BIT(7)
+#define AM33XX_GMII_SEL_RMII1_IO_CLK_EN	BIT(6)
+
 #define cpsw_enable_irq(priv)	\
 	do {			\
 		u32 i;		\
@@ -980,6 +987,56 @@ static inline void cpsw_add_dual_emac_def_ale_entries(
 		priv->host_port, ALE_VLAN, slave->port_vlan);
 }
 
+static void cpsw_set_phy_interface_mode(struct cpsw_slave *slave,
+					struct cpsw_priv *priv)
+{
+	u32 reg, mask, mode = 0;
+
+	switch (priv->data.hw_type) {
+	case CPSW_TYPE_AM33XX:
+		if (!priv->gmii_sel_reg)
+			break;
+
+		reg = readl(priv->gmii_sel_reg);
+
+		if (slave->phy) {
+			switch (slave->phy->interface) {
+			case PHY_INTERFACE_MODE_MII:
+			default:
+				mode = AM33XX_GMII_SEL_MODE_MII;
+				break;
+			case PHY_INTERFACE_MODE_RMII:
+				mode = AM33XX_GMII_SEL_MODE_RMII;
+				break;
+			case PHY_INTERFACE_MODE_RGMII:
+				mode = AM33XX_GMII_SEL_MODE_RGMII;
+				break;
+			};
+		}
+
+		mask = 0x3 << (slave->slave_num * 2) |
+		       BIT(slave->slave_num + 6);
+		mode <<= slave->slave_num * 2;
+
+		if (slave->data->rmii_clock_external) {
+			if (slave->slave_num == 0)
+				mode |= AM33XX_GMII_SEL_RMII1_IO_CLK_EN;
+			else
+				mode |= AM33XX_GMII_SEL_RMII2_IO_CLK_EN;
+		}
+
+		reg &= ~mask;
+		reg |= mode;
+
+		writel(reg, priv->gmii_sel_reg);
+		break;
+
+	default:
+		break;
+
+	}
+}
+
 static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 {
 	char name[32];
@@ -1028,6 +1085,8 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 			 slave->phy->phy_id);
 		phy_start(slave->phy);
 	}
+
+	cpsw_set_phy_interface_mode(slave, priv);
 }
 
 static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
@@ -1823,6 +1882,8 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 			memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
 
 		slave_data->phy_if = of_get_phy_mode(slave_node);
+		if (of_find_property(slave_node, "ti,rmii-clock-ext", NULL))
+			slave_data->rmii_clock_external = true;
 
 		if (data->dual_emac) {
 			if (of_property_read_u32(slave_node, "dual_emac_res_vlan",
diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h
index 96c374a..3baa2350 100644
--- a/drivers/net/ethernet/ti/cpsw.h
+++ b/drivers/net/ethernet/ti/cpsw.h
@@ -19,6 +19,7 @@
 struct cpsw_slave_data {
 	char		phy_id[MII_BUS_ID_SIZE];
 	int		phy_if;
+	bool		rmii_clock_external;
 	u8		mac_addr[ETH_ALEN];
 	u16		dual_emac_res_vlan;	/* Reserved VLAN for DualEMAC */
 };
-- 
1.8.3.1

Re: [PATCH v2 4/5] net: ethernet: cpsw: add support for hardware interface mode config

[Mugunthan V N]

On Friday 23 August 2013 02:13 PM, Daniel Mack wrote:
> The cpsw currently lacks code to properly set up the hardware interface
> mode on AM33xx. Other platforms might be equally affected.
>
> Usually, the bootloader will configure the control module register, so
> probably that's why such support wasn't needed in the past. In suspend
> mode though, this register is modified, and so it needs reprogramming
> after resume.
>
> This patch adds code that makes use of the previously added and optional
> support for passing the control mode register, and configures the
> correct register bits when the slave is opened.
>
> The AM33xx also has a bit for each slave to configure the RMII reference
> clock direction. Setting it is now supported by a per-slave DT property.
>
> This code path introducted by this patch is currently exclusive for
> am33xx.
>
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
>  Documentation/devicetree/bindings/net/cpsw.txt |  2 +
>  drivers/net/ethernet/ti/cpsw.c                 | 61 ++++++++++++++++++++++++++
>  drivers/net/ethernet/ti/cpsw.h                 |  1 +
>  3 files changed, 64 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
> index b717458..0895a51 100644
> --- a/Documentation/devicetree/bindings/net/cpsw.txt
> +++ b/Documentation/devicetree/bindings/net/cpsw.txt
> @@ -34,6 +34,8 @@ Required properties:
>  - phy_id		: Specifies slave phy id
>  - phy-mode		: The interface between the SoC and the PHY (a string
>  			  that of_get_phy_mode() can understand)
> +- ti,rmii-clock-ext	: If present, the driver will configure the RMII
> +			  interface to external clock usage
>  - mac-address		: Specifies slave MAC address
>  
>  Optional properties:
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 2e19de0..6e36f49 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -138,6 +138,13 @@ do {								\
>  #define CPSW_CMINTMAX_INTVL	(1000 / CPSW_CMINTMIN_CNT)
>  #define CPSW_CMINTMIN_INTVL	((1000 / CPSW_CMINTMAX_CNT) + 1)
>  
> +#define AM33XX_GMII_SEL_MODE_MII	(0)
> +#define AM33XX_GMII_SEL_MODE_RMII	(1)
> +#define AM33XX_GMII_SEL_MODE_RGMII	(2)
> +
> +#define AM33XX_GMII_SEL_RMII2_IO_CLK_EN	BIT(7)
> +#define AM33XX_GMII_SEL_RMII1_IO_CLK_EN	BIT(6)

These defined can go into cpsw.h so that we can maintain platform
defines in one file.

> +
>  #define cpsw_enable_irq(priv)	\
>  	do {			\
>  		u32 i;		\
> @@ -980,6 +987,56 @@ static inline void cpsw_add_dual_emac_def_ale_entries(
>  		priv->host_port, ALE_VLAN, slave->port_vlan);
>  }
>  
> +static void cpsw_set_phy_interface_mode(struct cpsw_slave *slave,
> +					struct cpsw_priv *priv)
> +{
> +	u32 reg, mask, mode = 0;
> +

Please define each variable in separate line to make it clean.
Please check for IS_ERR(gmii_sel_reg) and return if gmii register is not
specified in DT then the below code will crash when trying to access
gmii_sel_reg.

> +	switch (priv->data.hw_type) {
> +	case CPSW_TYPE_AM33XX:
> +		if (!priv->gmii_sel_reg)
> +			break;
> +
> +		reg = readl(priv->gmii_sel_reg);
> +
> +		if (slave->phy) {
> +			switch (slave->phy->interface) {
> +			case PHY_INTERFACE_MODE_MII:
> +			default:
> +				mode = AM33XX_GMII_SEL_MODE_MII;
> +				break;
> +			case PHY_INTERFACE_MODE_RMII:
> +				mode = AM33XX_GMII_SEL_MODE_RMII;
> +				break;
> +			case PHY_INTERFACE_MODE_RGMII:

You need to take care of other RGMII modes as well, for your info
AM335xevm phy mode is "rgmii-txid"

Regards
Mugunthan V N

[PATCH v2 5/5] ARM: dts: am33xx: adopt to cpsw changes

[Daniel Mack]

This third memory region just denotes one single register in the CONTROL
module block. The driver uses that in order to set the correct physical
ethernet interface modes.

Also update the compatible string to make use of the am335x specific
features of the cpsw driver.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 arch/arm/boot/dts/am33xx.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index a785b95..1a1e9dd 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -446,7 +446,7 @@
 		};
 
 		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
+			compatible = "ti,am3352-cpsw";
 			ti,hwmods = "cpgmac0";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
@@ -459,7 +459,8 @@
 			cpts_clock_mult = <0x80000000>;
 			cpts_clock_shift = <29>;
 			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
+			       0x4a101200 0x100
+			       0x44e10650 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-parent = <&intc>;
-- 
1.8.3.1

Re: [PATCH v2 5/5] ARM: dts: am33xx: adopt to cpsw changes

[Sekhar Nori]

On Friday 23 August 2013 02:13 PM, Daniel Mack wrote:
> This third memory region just denotes one single register in the CONTROL
> module block. The driver uses that in order to set the correct physical
> ethernet interface modes.
> 
> Also update the compatible string to make use of the am335x specific
> features of the cpsw driver.
> 
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
>  arch/arm/boot/dts/am33xx.dtsi | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index a785b95..1a1e9dd 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -446,7 +446,7 @@
>  		};
>  
>  		mac: ethernet@4a100000 {
> -			compatible = "ti,cpsw";
> +			compatible = "ti,am3352-cpsw";

Please keep this as

	compatible = "ti,am3352-cpsw", "ti,cpsw";

so users can upgrade the DTB or kernel independently. Apart from this
the series looks good to me.

Thanks,
Sekhar

Re: [PATCH v2 5/5] ARM: dts: am33xx: adopt to cpsw changes

[Daniel Mack]

On 23.08.2013 11:28, Sekhar Nori wrote:
> On Friday 23 August 2013 02:13 PM, Daniel Mack wrote:
>> This third memory region just denotes one single register in the CONTROL
>> module block. The driver uses that in order to set the correct physical
>> ethernet interface modes.
>>
>> Also update the compatible string to make use of the am335x specific
>> features of the cpsw driver.
>>
>> Signed-off-by: Daniel Mack <zonque@gmail.com>
>> ---
>>  arch/arm/boot/dts/am33xx.dtsi | 5 +++--
>>  1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index a785b95..1a1e9dd 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -446,7 +446,7 @@
>>  		};
>>  
>>  		mac: ethernet@4a100000 {
>> -			compatible = "ti,cpsw";
>> +			compatible = "ti,am3352-cpsw";
> 
> Please keep this as
> 
> 	compatible = "ti,am3352-cpsw", "ti,cpsw";
> 
> so users can upgrade the DTB or kernel independently. Apart from this
> the series looks good to me.

Ok, thanks. Given that this last patch will be merged through another
tree, can I just resend it separately, while David takes the rest as it is?

Thanks,
Daniel

Re: [PATCH v2 5/5] ARM: dts: am33xx: adopt to cpsw changes

[Sekhar Nori]

On Friday 23 August 2013 03:04 PM, Daniel Mack wrote:
> On 23.08.2013 11:28, Sekhar Nori wrote:
>> On Friday 23 August 2013 02:13 PM, Daniel Mack wrote:
>>> This third memory region just denotes one single register in the CONTROL
>>> module block. The driver uses that in order to set the correct physical
>>> ethernet interface modes.
>>>
>>> Also update the compatible string to make use of the am335x specific
>>> features of the cpsw driver.
>>>
>>> Signed-off-by: Daniel Mack <zonque@gmail.com>
>>> ---
>>>  arch/arm/boot/dts/am33xx.dtsi | 5 +++--
>>>  1 file changed, 3 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>>> index a785b95..1a1e9dd 100644
>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>> @@ -446,7 +446,7 @@
>>>  		};
>>>  
>>>  		mac: ethernet@4a100000 {
>>> -			compatible = "ti,cpsw";
>>> +			compatible = "ti,am3352-cpsw";
>>
>> Please keep this as
>>
>> 	compatible = "ti,am3352-cpsw", "ti,cpsw";
>>
>> so users can upgrade the DTB or kernel independently. Apart from this
>> the series looks good to me.
> 
> Ok, thanks. Given that this last patch will be merged through another
> tree, can I just resend it separately, while David takes the rest as it is?

Ideally you could, but there are some bugs in the way compatible string
in handled and due to this I suspect you need to reorder
cpsw_of_mtable[] to match correctly. Not sure if the bug has been fixed
in recent -rcs. Please check if modifying just this patch works and then
go ahead and post.

Please Cc Benoit Cousson <bcousson@baylibre.com> on your next submission
as he is the one who picks up DT patches for OMAP.

Thanks,
Sekhar

Re: [PATCH v2 5/5] ARM: dts: am33xx: adopt to cpsw changes

[Daniel Mack]

On 23.08.2013 11:40, Sekhar Nori wrote:
> On Friday 23 August 2013 03:04 PM, Daniel Mack wrote:
>> On 23.08.2013 11:28, Sekhar Nori wrote:

>> Ok, thanks. Given that this last patch will be merged through another
>> tree, can I just resend it separately, while David takes the rest as it is?
> 
> Ideally you could, but there are some bugs in the way compatible string
> in handled and due to this I suspect you need to reorder
> cpsw_of_mtable[] to match correctly. Not sure if the bug has been fixed
> in recent -rcs. Please check if modifying just this patch works and then
> go ahead and post.

No, you're right. I had to swap the two entries. Thanks for mentioning it.

> Please Cc Benoit Cousson <bcousson@baylibre.com> on your next submission
> as he is the one who picks up DT patches for OMAP.

Will do.



Daniel