netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ding Tianhong <dingtianhong@huawei.com>
To: Jay Vosburgh <fubar@us.ibm.com>,
	Andy Gospodarek <andy@greyhouse.net>,
	"David S. Miller" <davem@davemloft.net>,
	Nikolay Aleksandrov <nikolay@redhat.com>,
	Veaceslav Falico <vfalico@redhat.com>,
	Netdev <netdev@vger.kernel.org>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Subject: [PATCH 5/5] bonding: use RCU protection for alb xmit path
Date: Wed, 28 Aug 2013 12:21:32 +0800	[thread overview]
Message-ID: <521D7ACC.5010000@huawei.com> (raw)

The commit 278b20837511776dc9d5f6ee1c7fabd5479838bb
(bonding: initial RCU conversion) has convert the roundrobin, active-backup,
broadcast and xor xmit path to rcu protection, the performance will be better
for these mode, so this time, convert xmit path for alb mode.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Nikolay Aleksandrov <nikolay@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
---
 drivers/net/bonding/bond_alb.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index d266c56..e94a5d0 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -229,7 +229,7 @@ static struct slave *tlb_get_least_loaded_slave(struct bonding *bond)
 	max_gap = LLONG_MIN;
 
 	/* Find the slave with the largest gap */
-	bond_for_each_slave(bond, slave) {
+	bond_for_each_slave_rcu(bond, slave) {
 		if (SLAVE_IS_OK(slave)) {
 			long long gap = compute_gap(slave);
 
@@ -625,10 +625,12 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
 {
 	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
 	struct arp_pkt *arp = arp_pkt(skb);
-	struct slave *assigned_slave;
+	struct slave *assigned_slave, *curr_active_slave;
 	struct rlb_client_info *client_info;
 	u32 hash_index = 0;
 
+	curr_active_slave = rcu_dereference(bond->curr_active_slave);
+
 	_lock_rx_hashtbl(bond);
 
 	hash_index = _simple_hash((u8 *)&arp->ip_dst, sizeof(arp->ip_dst));
@@ -654,9 +656,9 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
 			 * move the old client to primary (curr_active_slave) so
 			 * that the new client can be assigned to this entry.
 			 */
-			if (bond->curr_active_slave &&
-			    client_info->slave != bond->curr_active_slave) {
-				client_info->slave = bond->curr_active_slave;
+			if (curr_active_slave &&
+			    client_info->slave != curr_active_slave) {
+				client_info->slave = curr_active_slave;
 				rlb_update_client(client_info);
 			}
 		}
@@ -1336,8 +1338,6 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 
 	/* make sure that the curr_active_slave do not change during tx
 	 */
-	read_lock(&bond->lock);
-	read_lock(&bond->curr_slave_lock);
 
 	switch (ntohs(skb->protocol)) {
 	case ETH_P_IP: {
@@ -1420,12 +1420,12 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 
 	if (!tx_slave) {
 		/* unbalanced or unassigned, send through primary */
-		tx_slave = bond->curr_active_slave;
+		tx_slave = rcu_dereference(bond->curr_active_slave);
 		bond_info->unbalanced_load += skb->len;
 	}
 
 	if (tx_slave && SLAVE_IS_OK(tx_slave)) {
-		if (tx_slave != bond->curr_active_slave) {
+		if (tx_slave != rcu_dereference(bond->curr_active_slave)) {
 			memcpy(eth_data->h_source,
 			       tx_slave->dev->dev_addr,
 			       ETH_ALEN);
@@ -1440,8 +1440,6 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 		}
 	}
 
-	read_unlock(&bond->curr_slave_lock);
-	read_unlock(&bond->lock);
 	if (res) {
 		/* no suitable interface, frame not sent */
 		kfree_skb(skb);
-- 
1.8.2.1

             reply	other threads:[~2013-08-28  4:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-28  4:21 Ding Tianhong [this message]
2013-08-29 14:35 ` [PATCH 5/5] bonding: use RCU protection for alb xmit path Nikolay Aleksandrov
2013-08-30  3:39   ` Ding Tianhong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=521D7ACC.5010000@huawei.com \
    --to=dingtianhong@huawei.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=fubar@us.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@redhat.com \
    --cc=vfalico@redhat.com \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).