netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ding Tianhong <dingtianhong@huawei.com>
To: Jay Vosburgh <fubar@us.ibm.com>,
	Andy Gospodarek <andy@greyhouse.net>,
	"David S. Miller" <davem@davemloft.net>,
	Nikolay Aleksandrov <nikolay@redhat.com>,
	Veaceslav Falico <vfalico@redhat.com>,
	Netdev <netdev@vger.kernel.org>
Subject: [PATCH net-next v2 5/6] bonding: restructure and add rcu for bond_for_each_slave_next()
Date: Wed, 4 Sep 2013 17:44:15 +0800	[thread overview]
Message-ID: <522700EF.3000702@huawei.com> (raw)

Remove the wordy int and add bond_for_each_slave_next_rcu() for future use.

Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Cc: Nikolay Aleksandrov <nikolay@redhat.com>
---
 drivers/net/bonding/bond_alb.c  |  3 +--
 drivers/net/bonding/bond_main.c |  6 ++----
 drivers/net/bonding/bonding.h   | 30 ++++++++++++++++++++++++++----
 3 files changed, 29 insertions(+), 10 deletions(-)

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 91f179d..c75d383 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -383,7 +383,6 @@ static struct slave *rlb_next_rx_slave(struct bonding *bond)
 {
 	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
 	struct slave *rx_slave, *slave, *start_at;
-	int i = 0;
 
 	if (bond_info->next_rx_slave)
 		start_at = bond_info->next_rx_slave;
@@ -392,7 +391,7 @@ static struct slave *rlb_next_rx_slave(struct bonding *bond)
 
 	rx_slave = NULL;
 
-	bond_for_each_slave_from(bond, slave, i, start_at) {
+	bond_for_each_slave_from(bond, slave, start_at) {
 		if (SLAVE_IS_OK(slave)) {
 			if (!rx_slave) {
 				rx_slave = slave;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 39e5b1c..4190389 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -782,7 +782,6 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 	struct slave *new_active, *old_active;
 	struct slave *bestslave = NULL;
 	int mintime = bond->params.updelay;
-	int i;
 
 	new_active = bond->curr_active_slave;
 
@@ -801,7 +800,7 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 	/* remember where to stop iterating over the slaves */
 	old_active = new_active;
 
-	bond_for_each_slave_from(bond, new_active, i, old_active) {
+	bond_for_each_slave_from(bond, new_active, old_active) {
 		if (new_active->link == BOND_LINK_UP) {
 			return new_active;
 		} else if (new_active->link == BOND_LINK_BACK &&
@@ -2756,7 +2755,6 @@ do_failover:
 static void bond_ab_arp_probe(struct bonding *bond)
 {
 	struct slave *slave, *next_slave;
-	int i;
 
 	read_lock(&bond->curr_slave_lock);
 
@@ -2788,7 +2786,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
 
 	/* search for next candidate */
 	next_slave = bond_next_slave(bond, bond->current_arp_slave);
-	bond_for_each_slave_from(bond, slave, i, next_slave) {
+	bond_for_each_slave_from(bond, slave, next_slave) {
 		if (IS_UP(slave->dev)) {
 			slave->link = BOND_LINK_BACK;
 			bond_set_slave_active_flags(slave);
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index e97eee9..80b170a 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -115,18 +115,40 @@
 	(bond_is_first_slave(bond, pos) ? bond_last_slave_rcu(bond) : \
 					  bond_to_slave_rcu((pos)->list.prev))
 
+/* Check whether the slave is the only one in bond */
+#define bond_is_only_slave(bond, pos) \
+	(((pos)->list.prev == &(bond)->slave_list) && \
+				    ((pos)->list.next == &(bond)->slave_list))
+
 /**
  * bond_for_each_slave_from - iterate the slaves list from a starting point
  * @bond:	the bond holding this list.
  * @pos:	current slave.
- * @cnt:	counter for max number of moves
  * @start:	starting point.
  *
  * Caller must hold bond->lock
  */
-#define bond_for_each_slave_from(bond, pos, cnt, start) \
-	for (cnt = 0, pos = start; pos && cnt < (bond)->slave_cnt; \
-	     cnt++, pos = bond_next_slave(bond, pos))
+#define bond_for_each_slave_from(bond, pos, start) \
+	for (pos = start; pos && (bond_is_only_slave(bond, start) ? \
+	    &pos->list != &bond->slave_list : \
+	    &pos->list != &start->list); bond_is_only_slave(bond, start) ? \
+	    (pos = list_entry(pos->list.next, typeof(*pos), list)) : \
+	    (pos = bond_next_slave(bond, pos)))
+
+/**
+ * bond_for_each_slave_from_rcu - iterate the slaves list from a starting point
+ * @bond:	the bond holding this list.
+ * @pos:	current slave.
+ * @start:	starting point.
+ *
+ * Caller must hold rcu_read_lock
+ */
+#define bond_for_each_slave_from_rcu(bond, pos, start) \
+	for (pos = start; pos && (bond_is_only_slave(bond, start) ? \
+	    &pos->list != &bond->slave_list : \
+	    &pos->list != &start->list); bond_is_only_slave(bond, start) ? \
+	    (pos = list_entry_rcu(pos->list.next, typeof(*pos), list)) : \
+	    (pos = bond_next_slave_rcu(bond, pos)))
 
 /**
  * bond_for_each_slave - iterate over all slaves
-- 
1.8.2.1

             reply	other threads:[~2013-09-04  9:48 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-04  9:44 Ding Tianhong [this message]
2013-09-04 10:35 ` [PATCH net-next v2 5/6] bonding: restructure and add rcu for bond_for_each_slave_next() Veaceslav Falico
2013-09-04 15:02   ` Ding Tianhong
2013-09-04 16:29     ` Veaceslav Falico

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=522700EF.3000702@huawei.com \
    --to=dingtianhong@huawei.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=fubar@us.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@redhat.com \
    --cc=vfalico@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).