netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Benedikt Spranger <b.spranger@linutronix.de>
Cc: netdev@vger.kernel.org,
	Alexander Frank <Alexander.Frank@eberspaecher.com>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Holger Dengler <dengler@linutronix.de>,
	"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>
Subject: Re: [PATCH 04/16] c_can: fix receive buffer configuration
Date: Mon, 09 Sep 2013 12:51:04 +0200	[thread overview]
Message-ID: <522DA818.1020802@pengutronix.de> (raw)
In-Reply-To: <1378711513-2548-5-git-send-email-b.spranger@linutronix.de>

[-- Attachment #1: Type: text/plain, Size: 2132 bytes --]

On 09/09/2013 09:25 AM, Benedikt Spranger wrote:
> The former implementation lacks some initialization of receive buffer.
> First the maximal buffer length was 0. The Buffer direction was not set
> and the mask register a reserverd flag was cleared.
> 
> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
> ---
>  drivers/net/can/c_can/c_can.c | 19 ++++++++++++++-----
>  1 file changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index bdb7bcd..886163f 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -116,6 +116,11 @@
>  				IF_COMM_CONTROL | IF_COMM_TXRQST | \
>  				IF_COMM_DATAA | IF_COMM_DATAB)
>  
> +/* IFx mask */
> +#define IF_MASK_MXTD		BIT(31)
> +#define IF_MASK_MDIR		BIT(30)
> +#define IF_MASK_RES		BIT(29)
> +
>  /* IFx arbitration */
>  #define IF_ARB_MSGVAL		BIT(31)
>  #define IF_ARB_MSGXTD		BIT(30)
> @@ -653,11 +658,15 @@ static void c_can_configure_msg_objects(struct net_device *dev)
>  
>  	/* setup receive message objects */
>  	for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
> -		c_can_setup_receive_object(dev, 0, i, 0, 0,
> -			(IF_MCONT_RXIE | IF_MCONT_UMASK) & ~IF_MCONT_EOB);
> -
> -	c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
> -			IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK);
> +		c_can_setup_receive_object(dev, 0, i,
> +					   IF_MASK_MDIR | IF_MASK_RES, 0,
> +					   IF_MCONT_UMASK | IF_MCONT_RXIE |
> +					   IF_MCONT_DLC_MAX);

DLC_MAX should be added in this patch. not in 3.

> +
> +	c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST,
> +				   IF_MASK_MDIR | IF_MASK_RES, 0,
> +				   IF_MCONT_UMASK | IF_MCONT_EOB |
> +				   IF_MCONT_RXIE | IF_MCONT_DLC_MAX);
>  }
>  
>  /*
> 

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]

  reply	other threads:[~2013-09-09 10:51 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-09  7:24 [PATCH 00/16] Support for Eberspächer Flexcard DCAN function Benedikt Spranger
2013-09-09  7:24 ` [PATCH 01/16] c_can_platform: add FlexCard D-CAN support Benedikt Spranger
2013-09-09  8:22   ` Marc Kleine-Budde
2013-09-09  7:24 ` [PATCH 02/16] c_can: add generic D-CAN RAM initialization support Benedikt Spranger
2013-09-09  8:34   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 03/16] c_can: simplify arbitration register handling Benedikt Spranger
2013-09-09  9:16   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 04/16] c_can: fix receive buffer configuration Benedikt Spranger
2013-09-09 10:51   ` Marc Kleine-Budde [this message]
2013-09-09  7:25 ` [PATCH 05/16] c_can: use 32 bit access for D_CAN Benedikt Spranger
2013-09-09  9:37   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 06/16] c_can: consider set bittiming may fail Benedikt Spranger
2013-09-09  9:39   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 07/16] c_can: reconfigre message objects after leaving init state Benedikt Spranger
2013-09-09  7:25 ` [PATCH 08/16] c_can: Add FlexCard CAN TX fifo support Benedikt Spranger
2013-09-09  9:47   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 09/16] c_can: expicit 32bit access on D_CAN to message buffer data register Benedikt Spranger
2013-09-09 11:20   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 10/16] c_can: add 16bit align 32bit access functions Benedikt Spranger
2013-09-09  9:57   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 11/16] c_can: stop netqueue if hardware is busy Benedikt Spranger
2013-09-09 10:05   ` Marc Kleine-Budde
2013-09-09 10:21   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 12/16] c_can: Add flag to disable automatic retransmission of CAN frames Benedikt Spranger
2013-09-09 10:21   ` Marc Kleine-Budde
2013-09-09 10:34     ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 13/16] c_can: flexcard: add ioctl to reset FIFO message object Benedikt Spranger
2013-09-09 10:24   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 14/16] flexcard: can: CAN local loopback using SKB pflags Benedikt Spranger
2013-09-09  7:25 ` [PATCH 15/16] flexcard: can: Configure CAN loopback packages (TXACK) Benedikt Spranger
2013-09-09 10:29   ` Marc Kleine-Budde
2013-09-09  7:25 ` [PATCH 16/16] c_can: fix TX packet accounting Benedikt Spranger
2013-09-09 10:31   ` Marc Kleine-Budde
2013-09-09  7:54 ` [PATCH 00/16] Support for Eberspächer Flexcard DCAN function Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=522DA818.1020802@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=Alexander.Frank@eberspaecher.com \
    --cc=b.spranger@linutronix.de \
    --cc=bigeasy@linutronix.de \
    --cc=dengler@linutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).