From: "François Cachereul" <f.cachereul@init-sys.com>
To: James Chapman <jchapman@katalix.com>
Cc: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Subject: [PATCH next] l2tp: add support for IPv4-mapped IPv6 addresses
Date: Fri, 27 Sep 2013 13:17:33 +0200 [thread overview]
Message-ID: <5245694D.3070105@init-sys.com> (raw)
IPv4 mapped addresses cause kernel panic.
The patch juste check whether the IPv6 address is an IPv4 mapped
address. If so, use IPv4 API instead of IPv6.
Signed-off-by: François CACHEREUL <f.cachereul@alphalink.fr>
---
net/l2tp/l2tp_core.c | 28 ++++++++++++++++++++++++----
net/l2tp/l2tp_core.h | 3 +++
2 files changed, 27 insertions(+), 4 deletions(-)
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index feae495..731aa40 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -496,6 +496,7 @@ out:
static inline int l2tp_verify_udp_checksum(struct sock *sk,
struct sk_buff *skb)
{
+ struct l2tp_tunnel *tunnel = (struct l2tp_tunnel *)sk->sk_user_data;
struct udphdr *uh = udp_hdr(skb);
u16 ulen = ntohs(uh->len);
__wsum psum;
@@ -504,7 +505,7 @@ static inline int l2tp_verify_udp_checksum(struct sock *sk,
return 0;
#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == PF_INET6) {
+ if (sk->sk_family == PF_INET6 && !tunnel->v4mapped) {
if (!uh->check) {
LIMIT_NETDEBUG(KERN_INFO "L2TP: IPv6: checksum is 0\n");
return 1;
@@ -1128,7 +1129,7 @@ static int l2tp_xmit_core(struct l2tp_session *session, struct sk_buff *skb,
/* Queue the packet to IP for output */
skb->local_df = 1;
#if IS_ENABLED(CONFIG_IPV6)
- if (skb->sk->sk_family == PF_INET6)
+ if (skb->sk->sk_family == PF_INET6 && !tunnel->v4mapped)
error = inet6_csk_xmit(skb, NULL);
else
#endif
@@ -1255,7 +1256,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len
/* Calculate UDP checksum if configured to do so */
#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == PF_INET6)
+ if (sk->sk_family == PF_INET6 && !tunnel->v4mapped)
l2tp_xmit_ipv6_csum(sk, skb, udp_len);
else
#endif
@@ -1620,6 +1621,10 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32
int err;
struct socket *sock = NULL;
struct sock *sk = NULL;
+#if IS_ENABLED(CONFIG_IPV6)
+ struct inet_sock *inet = NULL;
+ struct ipv6_pinfo *np = NULL;
+#endif
struct l2tp_net *pn;
enum l2tp_encap_type encap = L2TP_ENCAPTYPE_UDP;
@@ -1704,6 +1709,21 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32
if (cfg != NULL)
tunnel->debug = cfg->debug;
+#if IS_ENABLED(CONFIG_IPV6)
+ np = inet6_sk(sk);
+ if (sk->sk_family == PF_INET6 &&
+ ipv6_addr_v4mapped(&np->saddr) &&
+ ipv6_addr_v4mapped(&np->daddr)) {
+ tunnel->v4mapped = true;
+ inet = inet_sk(sk);
+ inet->inet_saddr = np->saddr.s6_addr32[3];
+ inet->inet_rcv_saddr = np->rcv_saddr.s6_addr32[3];
+ inet->inet_daddr = np->daddr.s6_addr32[3];
+ } else {
+ tunnel->v4mapped = false;
+ }
+#endif
+
/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
tunnel->encap = encap;
if (encap == L2TP_ENCAPTYPE_UDP) {
@@ -1712,7 +1732,7 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32
udp_sk(sk)->encap_rcv = l2tp_udp_encap_recv;
udp_sk(sk)->encap_destroy = l2tp_udp_encap_destroy;
#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == PF_INET6)
+ if (sk->sk_family == PF_INET6 && !tunnel->v4mapped)
udpv6_encap_enable();
else
#endif
diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h
index 66a559b..6f251cb 100644
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -194,6 +194,9 @@ struct l2tp_tunnel {
struct sock *sock; /* Parent socket */
int fd; /* Parent fd, if tunnel socket
* was created by userspace */
+#if IS_ENABLED(CONFIG_IPV6)
+ bool v4mapped;
+#endif
struct work_struct del_work;
--
1.7.10.4
next reply other threads:[~2013-09-27 11:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 11:17 François Cachereul [this message]
2013-10-01 4:57 ` [PATCH next] l2tp: add support for IPv4-mapped IPv6 addresses David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5245694D.3070105@init-sys.com \
--to=f.cachereul@init-sys.com \
--cc=davem@davemloft.net \
--cc=jchapman@katalix.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).