From: Ivan Frederiks <frederiks@speechpro.com>
To: Linux r8169 crew <netdev@vger.kernel.org>
Subject: Realtek RTL8102E registers
Date: Tue, 29 Oct 2013 19:05:14 +0400 [thread overview]
Message-ID: <526FCEAA.30102@speechpro.com> (raw)
Hello!
I met troubles with RTL8102E operation (you can find detailed
description below). I suppose that those troubles are related to chip
misconfiguration. Maybe you have access to RTL8102E register
description? If yes, would you be so kind to share it with me?
Thank you in advance,
Ivan Frederiks
Embedded developer
Speech Technology Center
Phone: +7-812-331-0665, ext. 6123, 6942
Fax: +7-812-327-9297
P.S.
Issue description:
I'm currently working with a custom motherboard equipped with 2 RTL8102E
ICs and an Intel x86 SOM. SOM runs 32-bit Linux (Arch or Ubuntu).
By default I use r8169 driver. I know that Ethernet link is up (I
checked it with an oscilloscope and I see that RTL8102E link LEDs are
on). In most cases everything works fine. But sometimes driver reports
that link is down. After a power cycle driver reports, that link is up.
When I replace driver with r8101, it always reports that link is up, but
I observe other issues.
next reply other threads:[~2013-10-29 15:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-29 15:05 Ivan Frederiks [this message]
2013-10-29 21:40 ` Realtek RTL8102E registers Francois Romieu
2013-11-06 10:13 ` Ivan Frederiks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526FCEAA.30102@speechpro.com \
--to=frederiks@speechpro.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).