netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ding Tianhong <dthxman@gmail.com>
To: Nikolay Aleksandrov <nikolay@redhat.com>
Cc: Ding Tianhong <dingtianhong@huawei.com>,
	Jay Vosburgh <fubar@us.ibm.com>,
	Andy Gospodarek <andy@greyhouse.net>,
	"David S. Miller" <davem@davemloft.net>,
	Veaceslav Falico <vfalico@redhat.com>,
	Netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH net-next v2 3/10] bonding: rebuild the lock use for bond_alb_monitor()
Date: Sat, 09 Nov 2013 22:15:01 +0800	[thread overview]
Message-ID: <527E4365.6060107@gmail.com> (raw)
In-Reply-To: <527D0C42.3010402@redhat.com>

于 2013/11/9 0:07, Nikolay Aleksandrov 写道:
> On 11/08/2013 03:07 AM, Ding Tianhong wrote:
>> The bond_alb_monitor use bond lock to protect the bond slave list,
>> it is no effect here, we need to use RTNL or RCU to replace bond lock,
>> the bond_alb_monitor will called 10 times one second, RTNL may loss
>> performance here, so the bond lock replace with RCU to protect the
>> bond slave list, also the RTNL is preserved, the logic of the monitor
>> did not changed.
>>
>> Suggested-by: Jay Vosburgh <fubar@us.ibm.com>
>> Suggested-by: Veaceslav Falico <vfalico@redhat.com>
>> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
>> ---
>>   drivers/net/bonding/bond_alb.c | 21 +++++++++------------
>>   1 file changed, 9 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
>> index 1fae915..ffdb91b 100644
>> --- a/drivers/net/bonding/bond_alb.c
>> +++ b/drivers/net/bonding/bond_alb.c
>> @@ -816,7 +816,7 @@ static void rlb_rebalance(struct bonding *bond)
>>   	for (; hash_index != RLB_NULL_INDEX;
>>   	     hash_index = client_info->used_next) {
>>   		client_info = &(bond_info->rx_hashtbl[hash_index]);
>> -		assigned_slave = rlb_next_rx_slave(bond);
>> +		assigned_slave = __rlb_next_rx_slave(bond);
>>   		if (assigned_slave && (client_info->slave != assigned_slave)) {
>>   			client_info->slave = assigned_slave;
>>   			client_info->ntt = 1;
>> @@ -1495,9 +1495,10 @@ void bond_alb_monitor(struct work_struct *work)
>>   	struct list_head *iter;
>>   	struct slave *slave;
>>   
>> -	read_lock(&bond->lock);
>> +	rcu_read_lock();
>>   
>> -	if (!bond_has_slaves(bond)) {
>> +	if (!bond_has_slaves_rcu(bond)) {
>> +		rcu_read_unlock();
>>   		bond_info->tx_rebalance_counter = 0;
>>   		bond_info->lp_counter = 0;
>>   		goto re_arm;
> If I'm not mistaken there's one more bond_for_each_slave() inside this function
> which should be converted to RCU.

But I really could not find any place should converted to RCU,

__rlb_next_rx_slave() is in RCU yet.

pls remind me if I miss something.

Regards
Ding


>> @@ -1528,7 +1529,7 @@ void bond_alb_monitor(struct work_struct *work)
>>   
>>   		read_lock(&bond->curr_slave_lock);
>>   
>> -		bond_for_each_slave(bond, slave, iter) {
>> +		bond_for_each_slave_rcu(bond, slave, iter) {
>>   			tlb_clear_slave(bond, slave, 1);
>>   			if (slave == bond->curr_active_slave) {
>>   				SLAVE_TLB_INFO(slave).load =
>> @@ -1552,11 +1553,9 @@ void bond_alb_monitor(struct work_struct *work)
>>   			 * dev_set_promiscuity requires rtnl and
>>   			 * nothing else.  Avoid race with bond_close.
>>   			 */
>> -			read_unlock(&bond->lock);
>> -			if (!rtnl_trylock()) {
>> -				read_lock(&bond->lock);
>> +			rcu_read_unlock();
>> +			if (!rtnl_trylock())
>>   				goto re_arm;
>> -			}
>>   
>>   			bond_info->rlb_promisc_timeout_counter = 0;
>>   
>> @@ -1568,7 +1567,7 @@ void bond_alb_monitor(struct work_struct *work)
>>   			bond_info->primary_is_promisc = 0;
>>   
>>   			rtnl_unlock();
>> -			read_lock(&bond->lock);
>> +			rcu_read_lock();
>>   		}
>>   
>>   		if (bond_info->rlb_rebalance) {
>> @@ -1590,11 +1589,9 @@ void bond_alb_monitor(struct work_struct *work)
>>   			}
>>   		}
>>   	}
>> -
>> +	rcu_read_unlock();
>>   re_arm:
>>   	queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
>> -
>> -	read_unlock(&bond->lock);
>>   }
>>   
>>   /* assumption: called before the slave is attached to the bond
>>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

  reply	other threads:[~2013-11-09 14:25 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-08  2:07 [PATCH net-next v2 3/10] bonding: rebuild the lock use for bond_alb_monitor() Ding Tianhong
2013-11-08 16:07 ` Nikolay Aleksandrov
2013-11-09 14:15   ` Ding Tianhong [this message]
2013-11-09 14:30     ` Nikolay Aleksandrov
2013-11-09 15:14       ` Ding Tianhong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=527E4365.6060107@gmail.com \
    --to=dthxman@gmail.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=dingtianhong@huawei.com \
    --cc=fubar@us.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@redhat.com \
    --cc=vfalico@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).