Re: KMSAN: uninit-value in batadv_hard_if_event

[Sven Eckelmann <sven@narfation.org>]

[-- Attachment #1: Type: text/plain, Size: 2909 bytes --]

Hi,

not sure whether this is now a bug in batman-adv or in the rtl8150 driver. See 
my comments inline.

On Friday, 18 October 2019 16:12:08 CEST syzbot wrote:
[...]
> usb 1-1: config 0 has no interface number 0
> usb 1-1: New USB device found, idVendor=0411, idProduct=0012,  
> bcdDevice=56.5f
> usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> usb 1-1: config 0 descriptor??
> =====================================================
> BUG: KMSAN: uninit-value in batadv_check_known_mac_addr  
> net/batman-adv/hard-interface.c:511 [inline]
> BUG: KMSAN: uninit-value in batadv_hardif_add_interface  
> net/batman-adv/hard-interface.c:942 [inline]
> BUG: KMSAN: uninit-value in batadv_hard_if_event+0x23c0/0x3260  
> net/batman-adv/hard-interface.c:1032
> CPU: 0 PID: 13223 Comm: kworker/0:3 Not tainted 5.4.0-rc3+ #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS  
> Google 01/01/2011
> Workqueue: usb_hub_wq hub_event
> Call Trace:
>   __dump_stack lib/dump_stack.c:77 [inline]
>   dump_stack+0x191/0x1f0 lib/dump_stack.c:113
>   kmsan_report+0x14a/0x2f0 mm/kmsan/kmsan_report.c:109
>   __msan_warning+0x73/0xf0 mm/kmsan/kmsan_instr.c:245
>   batadv_check_known_mac_addr net/batman-adv/hard-interface.c:511 [inline]
>   batadv_hardif_add_interface net/batman-adv/hard-interface.c:942 [inline]
>   batadv_hard_if_event+0x23c0/0x3260 net/batman-adv/hard-interface.c:1032
>   notifier_call_chain kernel/notifier.c:95 [inline]
[...]

The line in batman-adv is (batadv_check_known_mac_addr):

		if (!batadv_compare_eth(hard_iface->net_dev->dev_addr,
					net_dev->dev_addr))

So it goes through the list of ethernet interfaces (which are currently 
attached to a batadv interface) and compares it with the new device's MAC 
address. And it seems like the new device doesn't have the mac address part 
initialized yet.

Is this allowed in NETDEV_REGISTER/NETDEV_POST_TYPE_CHANGE?

> Uninit was stored to memory at:
>   kmsan_save_stack_with_flags mm/kmsan/kmsan.c:150 [inline]
>   kmsan_internal_chain_origin+0xbd/0x170 mm/kmsan/kmsan.c:317
>   kmsan_memcpy_memmove_metadata+0x25c/0x2e0 mm/kmsan/kmsan.c:253
>   kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:273
>   __msan_memcpy+0x56/0x70 mm/kmsan/kmsan_instr.c:129
>   set_ethernet_addr drivers/net/usb/rtl8150.c:282 [inline]
>   rtl8150_probe+0x1143/0x14a0 drivers/net/usb/rtl8150.c:912

This looks like it should store the mac address at this point.

    static inline void set_ethernet_addr(rtl8150_t * dev)
    {
    	u8 node_id[6];
    
    	get_registers(dev, IDR, sizeof(node_id), node_id);
    	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
    }

But it seems more like get_registers failed and the uninitialized was still 
copied to the mac address. Thus causing the KMSAN error in batman-adv.

Is this interpretation of the KMSAN output correct or do I miss something?

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]