From: Matthew Swabey <maswabey@purdue.edu>
To: netdev@vger.kernel.org
Subject: Do you know if the Linux cxgb driver still works in Kernel 3.X (3.11 specifically?)
Date: Wed, 04 Dec 2013 13:02:27 -0500 [thread overview]
Message-ID: <529F6E33.1070507@purdue.edu> (raw)
Googled, searched netdev and lkml with no joy.
Trying to debug a Chelsio T210 PCI-X 10G to a D-Link DXS-3250E switch
without any alternative hardware to test against.
1) Do you know if the Linux cxgb driver still works in Kernel 3.X (3.11
specifically?)
2) Has anyone tried it with a T210?
I am try to get an older T210 card working however it hard locks the
computer under light loads.
Symptoms are under low traffic conditions it works fine but under
loads generated by a 1G copper interface through a switch (ping -f or
netcat) the computer freezes and hardlocks.
Computer HP xw9400 and Ubuntu 13.10, kernel 3.11
Before that I have observed instances of the packet counts from ifconfig
resetting to 0 for no reason as well as some other oddities. Any
pointers as to where I should begin looking for debugging or how I might
test to see if the card itself is broken would be helpful if you can
spare the time,
Looking forward to hearing from you,
Matthew
--
Dr Matthew Swabey
Deputy Director of Instructional Labs
School of Electrical and Computer Engineering
Purdue University
Electrical Engineering Building
465 Northwestern Ave.
West Lafayette, Indiana 47907-2035
USA
T: +1-765-49-42545 E: maswabey@purdue.edu
reply other threads:[~2013-12-04 18:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=529F6E33.1070507@purdue.edu \
--to=maswabey@purdue.edu \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).