From: Wang Weidong <wangweidong1@huawei.com>
To: Daniel Borkmann <dborkman@redhat.com>
Cc: <jon.maloy@ericsson.com>, <allan.stephens@windriver.com>,
<davem@davemloft.net>, <netdev@vger.kernel.org>,
<tipc-discussion@lists.sourceforge.net>
Subject: Re: [PATCH net-next 1/6] tipc: add link_kfree_skbuff helper function
Date: Fri, 6 Dec 2013 17:16:50 +0800 [thread overview]
Message-ID: <52A19602.1070903@huawei.com> (raw)
In-Reply-To: <52A19433.50903@redhat.com>
On 2013/12/6 17:09, Daniel Borkmann wrote:
> On 12/06/2013 07:23 AM, Wang Weidong wrote:
>> replaces some chunks of code that kfree the sk_buff.
>> This is just code simplification, no functional changes.
>>
>> Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
>> ---
>> net/tipc/link.c | 58 +++++++++++++++++++--------------------------------------
>> 1 file changed, 19 insertions(+), 39 deletions(-)
>>
>> diff --git a/net/tipc/link.c b/net/tipc/link.c
>> index 69cd9bf..1c27d7b 100644
>> --- a/net/tipc/link.c
>> +++ b/net/tipc/link.c
>> @@ -100,6 +100,17 @@ static unsigned int align(unsigned int i)
>> return (i + 3) & ~3u;
>> }
>>
>> +static void link_kfree_skbuff(struct sk_buff *buf)
>> +{
>> + struct sk_buff *next;
>> +
>> + while (buf) {
>> + next = buf->next;
>> + kfree_skb(buf);
>> + buf = next;
>> + }
>> +}
>
> So kfree_skb_list() does not work for you ?
>
> Also, in case we do not have such generic functions, they should
> go to skbuff.c instead ...
>
No, It is work for me. I just din't not the kfree_skb_list() and I found
that use a helper function can make code more simplification. So I do that.
Regards.
Wang
>> static void link_init_max_pkt(struct tipc_link *l_ptr)
>> {
>> u32 max_pkt;
>> @@ -387,13 +398,8 @@ exit:
>> static void link_release_outqueue(struct tipc_link *l_ptr)
>> {
>> struct sk_buff *buf = l_ptr->first_out;
>> - struct sk_buff *next;
>>
>> - while (buf) {
>> - next = buf->next;
>> - kfree_skb(buf);
>> - buf = next;
>> - }
>> + link_kfree_skbuff(buf);
>> l_ptr->first_out = NULL;
>> l_ptr->out_queue_size = 0;
>> }
>> @@ -416,21 +422,12 @@ void tipc_link_reset_fragments(struct tipc_link *l_ptr)
>> void tipc_link_stop(struct tipc_link *l_ptr)
>> {
>> struct sk_buff *buf;
>> - struct sk_buff *next;
>>
>> buf = l_ptr->oldest_deferred_in;
>> - while (buf) {
>> - next = buf->next;
>> - kfree_skb(buf);
>> - buf = next;
>> - }
>> + link_kfree_skbuff(buf);
>>
>> buf = l_ptr->first_out;
>> - while (buf) {
>> - next = buf->next;
>> - kfree_skb(buf);
>> - buf = next;
>> - }
>> + link_kfree_skbuff(buf);
>>
>> tipc_link_reset_fragments(l_ptr);
>>
>> @@ -472,11 +469,7 @@ void tipc_link_reset(struct tipc_link *l_ptr)
>> kfree_skb(l_ptr->proto_msg_queue);
>> l_ptr->proto_msg_queue = NULL;
>> buf = l_ptr->oldest_deferred_in;
>> - while (buf) {
>> - struct sk_buff *next = buf->next;
>> - kfree_skb(buf);
>> - buf = next;
>> - }
>> + link_kfree_skbuff(buf);
>> if (!list_empty(&l_ptr->waiting_ports))
>> tipc_link_wakeup_ports(l_ptr, 1);
>>
>> @@ -1127,10 +1120,7 @@ again:
>> if (copy_from_user(buf->data + fragm_crs, sect_crs, sz)) {
>> res = -EFAULT;
>> error:
>> - for (; buf_chain; buf_chain = buf) {
>> - buf = buf_chain->next;
>> - kfree_skb(buf_chain);
>> - }
>> + link_kfree_skbuff(buf_chain);
>> return res;
>> }
>> sect_crs += sz;
>> @@ -1180,18 +1170,12 @@ error:
>> if (l_ptr->max_pkt < max_pkt) {
>> sender->max_pkt = l_ptr->max_pkt;
>> tipc_node_unlock(node);
>> - for (; buf_chain; buf_chain = buf) {
>> - buf = buf_chain->next;
>> - kfree_skb(buf_chain);
>> - }
>> + link_kfree_skbuff(buf_chain);
>> goto again;
>> }
>> } else {
>> reject:
>> - for (; buf_chain; buf_chain = buf) {
>> - buf = buf_chain->next;
>> - kfree_skb(buf_chain);
>> - }
>> + link_kfree_skbuff(buf_chain);
>> return tipc_port_reject_sections(sender, hdr, msg_sect,
>> len, TIPC_ERR_NO_NODE);
>> }
>> @@ -2306,11 +2290,7 @@ static int link_send_long_buf(struct tipc_link *l_ptr, struct sk_buff *buf)
>> fragm = tipc_buf_acquire(fragm_sz + INT_H_SIZE);
>> if (fragm == NULL) {
>> kfree_skb(buf);
>> - while (buf_chain) {
>> - buf = buf_chain;
>> - buf_chain = buf_chain->next;
>> - kfree_skb(buf);
>> - }
>> + link_kfree_skbuff(buf_chain);
>> return -ENOMEM;
>> }
>> msg_set_size(&fragm_hdr, fragm_sz + INT_H_SIZE);
>>
>
> .
>
next prev parent reply other threads:[~2013-12-06 9:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 6:23 [PATCH net-next 0/6] tipc: do some clean ups Wang Weidong
2013-12-06 6:23 ` [PATCH net-next 1/6] tipc: add link_kfree_skbuff helper function Wang Weidong
2013-12-06 6:34 ` Ying Xue
2013-12-06 6:42 ` Wang Weidong
2013-12-06 14:13 ` Jon Maloy
2013-12-07 4:52 ` Wang Weidong
2013-12-06 6:44 ` Eric Dumazet
2013-12-06 9:09 ` Daniel Borkmann
2013-12-06 9:16 ` Wang Weidong [this message]
2013-12-06 6:23 ` [PATCH net-next 2/6] tipc: remove the unnecessary variable Wang Weidong
2013-12-06 6:23 ` [PATCH net-next 3/6] tipc: use a same goto path Wang Weidong
2013-12-06 6:23 ` [PATCH net-next 4/6] tipc: Use <linux/uaccess.h> instead of <asm/uaccess.h> Wang Weidong
2013-12-06 6:23 ` [PATCH net-next 5/6] tipc: change lock_sock order in connect() Wang Weidong
2013-12-06 6:23 ` [PATCH net-next 6/6] tipc: separate the check nseq and sseq allocate failed Wang Weidong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A19602.1070903@huawei.com \
--to=wangweidong1@huawei.com \
--cc=allan.stephens@windriver.com \
--cc=davem@davemloft.net \
--cc=dborkman@redhat.com \
--cc=jon.maloy@ericsson.com \
--cc=netdev@vger.kernel.org \
--cc=tipc-discussion@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).