From: Zoltan Kiss <zoltan.kiss@citrix.com>
To: Wei Liu <wei.liu2@citrix.com>
Cc: <ian.campbell@citrix.com>, <xen-devel@lists.xenproject.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<jonathan.davies@citrix.com>
Subject: Re: [PATCH net-next v2 6/9] xen-netback: Handle guests with too many frags
Date: Mon, 16 Dec 2013 16:10:42 +0000 [thread overview]
Message-ID: <52AF2602.2000409@citrix.com> (raw)
In-Reply-To: <20131213154307.GN21900@zion.uk.xensource.com>
On 13/12/13 15:43, Wei Liu wrote:
> On Thu, Dec 12, 2013 at 11:48:14PM +0000, Zoltan Kiss wrote:
>> Xen network protocol had implicit dependency on MAX_SKB_FRAGS. Netback has to
>> handle guests sending up to XEN_NETBK_LEGACY_SLOTS_MAX slots. To achieve that:
>> - create a new skb
>> - map the leftover slots to its frags (no linear buffer here!)
>> - chain it to the previous through skb_shinfo(skb)->frag_list
>> - map them
>> - copy the whole stuff into a brand new skb and send it to the stack
>> - unmap the 2 old skb's pages
>>
>
> Do you see performance regression with this approach?
Well, it was pretty hard to reproduce that behaviour even with NFS. I
don't think it happens often enough that it causes a noticable
performance regression. Anyway, it would be just as slow as the current
grant copy with coalescing, maybe a bit slower due to the unmapping. But
at least we use a core network function to do the coalescing.
Or, if you mean the generic performance, if this problem doesn't appear,
then no, I don't see performance regression.
>> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
>>
>> ---
>> drivers/net/xen-netback/netback.c | 99 +++++++++++++++++++++++++++++++++++--
>> 1 file changed, 94 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
>> index e26cdda..f6ed1c8 100644
>> --- a/drivers/net/xen-netback/netback.c
>> +++ b/drivers/net/xen-netback/netback.c
>> @@ -906,11 +906,15 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
>> u16 pending_idx = *((u16 *)skb->data);
>> int start;
>> pending_ring_idx_t index;
>> - unsigned int nr_slots;
>> + unsigned int nr_slots, frag_overflow = 0;
>>
>> /* At this point shinfo->nr_frags is in fact the number of
>> * slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX.
>> */
>> + if (shinfo->nr_frags > MAX_SKB_FRAGS) {
>> + frag_overflow = shinfo->nr_frags - MAX_SKB_FRAGS;
>> + shinfo->nr_frags = MAX_SKB_FRAGS;
>> + }
>> nr_slots = shinfo->nr_frags;
>>
>
> It is also probably better to check whether shinfo->nr_frags is too
> large which makes frag_overflow > MAX_SKB_FRAGS. I know skb should be
> already be valid at this point but it wouldn't hurt to be more careful.
Ok, I've added this:
/* At this point shinfo->nr_frags is in fact the number of
* slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX.
*/
+ if (shinfo->nr_frags > MAX_SKB_FRAGS) {
+ if (shinfo->nr_frags > XEN_NETBK_LEGACY_SLOTS_MAX) return NULL;
+ frag_overflow = shinfo->nr_frags - MAX_SKB_FRAGS;
>
>> /* Skip first skb fragment if it is on same page as header fragment. */
>> @@ -926,6 +930,33 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
>>
>> BUG_ON(shinfo->nr_frags > MAX_SKB_FRAGS);
>>
>> + if (frag_overflow) {
>> + struct sk_buff *nskb = alloc_skb(NET_SKB_PAD + NET_IP_ALIGN,
>> + GFP_ATOMIC | __GFP_NOWARN);
>> + if (unlikely(nskb == NULL)) {
>> + netdev_err(vif->dev,
>> + "Can't allocate the frag_list skb.\n");
>> + return NULL;
>> + }
>> +
>> + /* Packets passed to netif_rx() must have some headroom. */
>> + skb_reserve(nskb, NET_SKB_PAD + NET_IP_ALIGN);
>> +
>
> The code to call alloc_skb and skb_reserve is copied from other
> location. I would like to have a dedicated function to allocate skb in
> netback if possible.
OK
next prev parent reply other threads:[~2013-12-16 16:10 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-12 23:48 [PATCH net-next v2 0/9] xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 1/9] xen-netback: Introduce TX grant map definitions Zoltan Kiss
2013-12-13 15:31 ` Wei Liu
2013-12-13 18:22 ` Zoltan Kiss
2013-12-13 19:14 ` Wei Liu
2013-12-16 15:21 ` Zoltan Kiss
2013-12-16 17:50 ` Wei Liu
2014-01-07 14:50 ` Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 2/9] xen-netback: Change TX path from grant copy to mapping Zoltan Kiss
2013-12-13 15:36 ` Wei Liu
2013-12-16 15:38 ` Zoltan Kiss
2013-12-16 18:21 ` Wei Liu
2013-12-16 18:57 ` Zoltan Kiss
2013-12-16 19:06 ` Wei Liu
2013-12-17 21:49 ` [Xen-devel] " Konrad Rzeszutek Wilk
2013-12-30 17:58 ` Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 3/9] xen-netback: Remove old TX grant copy definitons and fix indentations Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 4/9] xen-netback: Change RX path for mapped SKB fragments Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 5/9] xen-netback: Add stat counters for zerocopy Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 6/9] xen-netback: Handle guests with too many frags Zoltan Kiss
2013-12-13 15:43 ` Wei Liu
2013-12-16 16:10 ` Zoltan Kiss [this message]
2013-12-16 18:09 ` Wei Liu
2014-01-07 15:23 ` Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 7/9] xen-netback: Add stat counters for frag_list skbs Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 8/9] xen-netback: Timeout packets in RX path Zoltan Kiss
2013-12-13 15:44 ` Wei Liu
2013-12-16 17:16 ` Zoltan Kiss
2013-12-16 19:03 ` Wei Liu
2013-12-12 23:48 ` [PATCH net-next v2 9/9] xen-netback: Aggregate TX unmap operations Zoltan Kiss
2013-12-13 15:44 ` Wei Liu
2013-12-16 16:30 ` Zoltan Kiss
2013-12-16 6:32 ` [Xen-devel] [PATCH net-next v2 0/9] xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy annie li
2013-12-16 16:13 ` Zoltan Kiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52AF2602.2000409@citrix.com \
--to=zoltan.kiss@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=jonathan.davies@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).