From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Vince Bridgers <vbridgers2013@gmail.com>,
Rayagond K <rayagond@vayavyalabs.com>
Cc: <netdev@vger.kernel.org>
Subject: Re: [PATCH net] drivers : stmmac : Fixes for IEEE 1588 Timestamping
Date: Thu, 19 Dec 2013 12:50:50 +0100 [thread overview]
Message-ID: <52B2DD9A.50003@st.com> (raw)
In-Reply-To: <CAOwfj2Muc4szDNiJc5SjXsw4Oy_LkrBJeiDUY7-09N=paCSSKg@mail.gmail.com>
On 12/19/2013 12:35 AM, Vince Bridgers wrote:
> >From e9278f13a922433adbf3a81ef9d7823a99bd8d88 Mon Sep 17 00:00:00 2001
> From: Vince Bridgers <vbridger2013@gmail.com>
> Date: Wed, 18 Dec 2013 14:29:26 -0600
> Subject: [PATCH 1/1] Fix release of incorrect spinlock in
> stmmac_ptp.c, and
> masked configuration of control variable adv_ts
>
> Two issues addressed with this patch:
> 1) The functions stmmac_adjust_freq and stmmac_adjust_time were
> releasing the incorrect spinlock
> at the end of the function - priv->lock instead of priv->ptp_lock.
> 2) Setting the control data variable priv->adv_ts according to
> hardware capabilities was masked
> by message level settings, so it was not being set correctly in the
> case that the Synopsys
> MAC only supported advanced timestamping.
>
> Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Hello Vince
thanks for the patch that provides useful fixes. Pls can you check if it
applies
fine on net.git master branch? It failed on my side.
peppe
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20
> +++++++++-----------
> drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
> 2 files changed, 11 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 8a7a23a..797b56a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -622,17 +622,15 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
> if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
> return -EOPNOTSUPP;
>
> - if (netif_msg_hw(priv)) {
> - if (priv->dma_cap.time_stamp) {
> - pr_debug("IEEE 1588-2002 Time Stamp supported\n");
> - priv->adv_ts = 0;
> - }
> - if (priv->dma_cap.atime_stamp && priv->extend_desc) {
> - pr_debug
> - ("IEEE 1588-2008 Advanced Time Stamp supported\n");
> - priv->adv_ts = 1;
> - }
> - }
> + priv->adv_ts = 0;
> + if (priv->dma_cap.atime_stamp && priv->extend_desc)
> + priv->adv_ts = 1;
> +
> + if (netif_msg_hw(priv) && priv->dma_cap.time_stamp)
> + pr_debug("IEEE 1588-2002 Time Stamp supported\n");
> +
> + if (netif_msg_hw(priv) && priv->adv_ts)
> + pr_debug("IEEE 1588-2008 Advanced Time Stamp supported\n");
>
> priv->hw->ptp = &stmmac_ptp;
> priv->hwts_tx_en = 0;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> index b8b0eee..7680581 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> @@ -56,7 +56,7 @@ static int stmmac_adjust_freq(struct ptp_clock_info
> *ptp, s32 ppb)
>
> priv->hw->ptp->config_addend(priv->ioaddr, addend);
>
> - spin_unlock_irqrestore(&priv->lock, flags);
> + spin_unlock_irqrestore(&priv->ptp_lock, flags);
>
> return 0;
> }
> @@ -91,7 +91,7 @@ static int stmmac_adjust_time(struct ptp_clock_info
> *ptp, s64 delta)
>
> priv->hw->ptp->adjust_systime(priv->ioaddr, sec, nsec, neg_adj);
>
> - spin_unlock_irqrestore(&priv->lock, flags);
> + spin_unlock_irqrestore(&priv->ptp_lock, flags);
>
> return 0;
> }
>
next prev parent reply other threads:[~2013-12-19 11:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 23:35 [PATCH net] drivers : stmmac : Fixes for IEEE 1588 Timestamping Vince Bridgers
2013-12-19 11:50 ` Giuseppe CAVALLARO [this message]
2013-12-22 23:46 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B2DD9A.50003@st.com \
--to=peppe.cavallaro@st.com \
--cc=netdev@vger.kernel.org \
--cc=rayagond@vayavyalabs.com \
--cc=vbridgers2013@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).