netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] can: ti_hecc: Use the OMAP2PLUS dependency for omap2plus devices
@ 2013-12-20 12:21 Ezequiel Garcia
  2013-12-20 12:35 ` Marc Kleine-Budde
  0 siblings, 1 reply; 4+ messages in thread
From: Ezequiel Garcia @ 2013-12-20 12:21 UTC (permalink / raw)
  To: netdev, linux-can; +Cc: Marc Kleine-Budde, Ezequiel Garcia

OMAP's ti_hecc driver is used to support the CAN controller on many
omap2plus SoCs (OMAP2430, OMAP3, OMAP4, OMAP5 and AM335x).
Constrain the driver to OMAP2PLUS, which is the super-set of all the
other SoCs variants.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
 drivers/net/can/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 3c06947..f0b106b 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -71,7 +71,7 @@ config CAN_AT91
 	  and AT91SAM9X5 processors.
 
 config CAN_TI_HECC
-	depends on ARCH_OMAP3
+	depends on ARCH_OMAP2PLUS
 	tristate "TI High End CAN Controller"
 	---help---
 	  Driver for TI HECC (High End CAN Controller) module found on many
-- 
1.8.1.5


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH] can: ti_hecc: Use the OMAP2PLUS dependency for omap2plus devices
  2013-12-20 12:21 [PATCH] can: ti_hecc: Use the OMAP2PLUS dependency for omap2plus devices Ezequiel Garcia
@ 2013-12-20 12:35 ` Marc Kleine-Budde
  2013-12-20 12:52   ` Ezequiel Garcia
  0 siblings, 1 reply; 4+ messages in thread
From: Marc Kleine-Budde @ 2013-12-20 12:35 UTC (permalink / raw)
  To: Ezequiel Garcia; +Cc: netdev, linux-can

[-- Attachment #1: Type: text/plain, Size: 637 bytes --]

On 12/20/2013 01:21 PM, Ezequiel Garcia wrote:
> OMAP's ti_hecc driver is used to support the CAN controller on many
> omap2plus SoCs (OMAP2430, OMAP3, OMAP4, OMAP5 and AM335x).
> Constrain the driver to OMAP2PLUS, which is the super-set of all the
> other SoCs variants.

Why not enable it for all ARM platforms to get a bigger compile coverage?

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] can: ti_hecc: Use the OMAP2PLUS dependency for omap2plus devices
  2013-12-20 12:35 ` Marc Kleine-Budde
@ 2013-12-20 12:52   ` Ezequiel Garcia
  2013-12-20 19:56     ` Marc Kleine-Budde
  0 siblings, 1 reply; 4+ messages in thread
From: Ezequiel Garcia @ 2013-12-20 12:52 UTC (permalink / raw)
  To: Marc Kleine-Budde; +Cc: netdev, linux-can

On Fri, Dec 20, 2013 at 01:35:58PM +0100, Marc Kleine-Budde wrote:
> On 12/20/2013 01:21 PM, Ezequiel Garcia wrote:
> > OMAP's ti_hecc driver is used to support the CAN controller on many
> > omap2plus SoCs (OMAP2430, OMAP3, OMAP4, OMAP5 and AM335x).
> > Constrain the driver to OMAP2PLUS, which is the super-set of all the
> > other SoCs variants.
> 
> Why not enable it for all ARM platforms to get a bigger compile coverage?
> 

Hm.. Isn't the COMPILE_TEST option for getting compile coverage?

If the IP is only available on OMAP SoCs, it makes sense to only allow
building it there, but I don't really have a strong opinion.
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] can: ti_hecc: Use the OMAP2PLUS dependency for omap2plus devices
  2013-12-20 12:52   ` Ezequiel Garcia
@ 2013-12-20 19:56     ` Marc Kleine-Budde
  0 siblings, 0 replies; 4+ messages in thread
From: Marc Kleine-Budde @ 2013-12-20 19:56 UTC (permalink / raw)
  To: Ezequiel Garcia; +Cc: netdev, linux-can

[-- Attachment #1: Type: text/plain, Size: 1084 bytes --]

On 12/20/2013 01:52 PM, Ezequiel Garcia wrote:
> On Fri, Dec 20, 2013 at 01:35:58PM +0100, Marc Kleine-Budde wrote:
>> On 12/20/2013 01:21 PM, Ezequiel Garcia wrote:
>>> OMAP's ti_hecc driver is used to support the CAN controller on many
>>> omap2plus SoCs (OMAP2430, OMAP3, OMAP4, OMAP5 and AM335x).
>>> Constrain the driver to OMAP2PLUS, which is the super-set of all the
>>> other SoCs variants.
>>
>> Why not enable it for all ARM platforms to get a bigger compile coverage?
>>
> 
> Hm.. Isn't the COMPILE_TEST option for getting compile coverage?
> 
> If the IP is only available on OMAP SoCs, it makes sense to only allow
> building it there, but I don't really have a strong opinion.

We've replaced the depends on ARCH_* in the flexcan and at91 driver by a
depends on ARM.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2013-12-20 19:56 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-20 12:21 [PATCH] can: ti_hecc: Use the OMAP2PLUS dependency for omap2plus devices Ezequiel Garcia
2013-12-20 12:35 ` Marc Kleine-Budde
2013-12-20 12:52   ` Ezequiel Garcia
2013-12-20 19:56     ` Marc Kleine-Budde

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).