Re: [PATCH net-next V1 2/2] net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling

[Or Gerlitz <ogerlitz@mellanox.com>]

On 22/12/2013 16:19, Joe Perches wrote:
> On Sun, 2013-12-22 at 16:00 +0200, Or Gerlitz wrote:
>
> trivia:
>
>> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
> []
>> @@ -1061,6 +1126,10 @@ static void mlx4_en_do_multicast(struct mlx4_en_priv *priv,
>>   				if (err)
>>   					en_err(priv, "Fail to attach multicast address\n");
>>   
>> +				err = mlx4_en_tunnel_steer_add(priv, &mc_list[10], priv->base_qpn,
>> +							       &mclist->tunnel_reg_id);
>> +					if (err)
>> +						en_err(priv, "Failed to attach multicast address\n");
> Overly indented if/en_err here.

thanks! will fix

>
>> @@ -2400,6 +2478,14 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
>>   	if (mdev->dev->caps.steering_mode != MLX4_STEERING_MODE_A0)
>>   		dev->priv_flags |= IFF_UNICAST_FLT;
>>   
>> +	if ((mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)) {
>> +		dev->hw_enc_features = NETIF_F_SG | NETIF_F_IP_CSUM |
>> +					NETIF_F_RXCSUM | NETIF_F_TSO |
>> +					NETIF_F_GSO_UDP_TUNNEL;
>> +		dev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
>> +		dev->features    |= NETIF_F_GSO_UDP_TUNNEL;
> Perhaps hw_enc_features should be |= as well.
> NETIF_F_SG is set in register_netdevice() for hw_enc_features.
>
>> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
> []
>> @@ -68,6 +68,12 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
>>   	context->db_rec_addr = cpu_to_be64(priv->res.db.dma << 2);
>>   	if (!(dev->features & NETIF_F_HW_VLAN_CTAG_RX))
>>   		context->param3 |= cpu_to_be32(1 << 30);
>> +
>> +	if (!is_tx && !rss &&
>> +	    (mdev->dev->caps.tunnel_offload_mode ==  MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)) {
>> +		en_dbg(HW, priv, "Setting RX qp %x tunnel mode to RX tunneled & non-tunneled\n", qpn);
>> +		context->srqn |= cpu_to_be32(7 << 28); /* this fills bits 30:28 */
> Is that bit setting 0 based or 1 based?

1 based, any issue with that?

anyway, the Ethernet driver doesn't use this word (context->srqn), so I 
will make it = and not |= for being clear robust.

>
>> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
> []
>> @@ -628,7 +628,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
>>   	int nr;
>>   	unsigned int length;
>>   	int polled = 0;
>> -	int ip_summed;
>> +	int ip_summed, l2_tunnel;
> Maybe nicer as bool
>
>

OK