Re: [PATCH RFC 3/3] [RFC] ARM: shmobile: genmai: Enable r7s72100-gether

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 12/15/2013 11:24 AM, Simon Horman wrote:

> ---
>   arch/arm/mach-shmobile/board-genmai.c | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)

> diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
> index 3e92e3c..838325b 100644
> --- a/arch/arm/mach-shmobile/board-genmai.c
> +++ b/arch/arm/mach-shmobile/board-genmai.c
> @@ -20,15 +20,35 @@
>
>   #include <linux/kernel.h>
>   #include <linux/platform_device.h>
> +#include <linux/sh_eth.h>
>   #include <mach/common.h>
> +#include <mach/irqs.h>
>   #include <mach/r7s72100.h>
>   #include <asm/mach-types.h>
>   #include <asm/mach/arch.h>
>
> +/* GEther */

    Just Ether.

> +static const struct sh_eth_plat_data gether_pdata __initconst = {
> +	.phy			= 0x00, /* PD60610 */
> +	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
> +	.phy_interface		= PHY_INTERFACE_MODE_MII,

    I think .no_ether_link should be set to 1 -- I don't see the LINK signal 
in the manual.

> +};
> +
> +static const struct resource gether_resources[] __initconst = {
> +	DEFINE_RES_MEM(0xe8203000, 0x800),
> +	DEFINE_RES_MEM(0xe8204800, 0x200),
> +	DEFINE_RES_IRQ(gic_iid(359)),
> +};
> +
>   static void __init genmai_add_standard_devices(void)
>   {
>   	r7s72100_clock_init();
>   	r7s72100_add_dt_devices();
> +
> +	platform_device_register_resndata(&platform_bus, "r7s72100-gether", -1,

    We can't call it "-gether" if it lacks 1000 Mbps support. And the manual 
explicitly calls it ETHER.

WBR, Sergei