From: Daniel Borkmann <dborkman@redhat.com>
To: Dave Jones <davej@redhat.com>
Cc: netdev@vger.kernel.org,
Fedora Kernel Team <kernel-team@fedoraproject.org>,
Vlastimil Babka <vbabka@suse.cz>,
Michel Lespinasse <walken@google.com>
Subject: Re: packet mmap related oops (with reproducer)
Date: Wed, 22 Jan 2014 23:45:49 +0100 [thread overview]
Message-ID: <52E04A1D.8080803@redhat.com> (raw)
In-Reply-To: <20140122223920.GA18162@redhat.com>
Hi Dave,
On 01/22/2014 11:39 PM, Dave Jones wrote:
> We had a Fedora user report this bug, with a reproducer (below).
>
> On Fri, Jan 17, 2014 at 06:52:06AM +0000, bugzilla@redhat.com wrote:
> > https://bugzilla.redhat.com/show_bug.cgi?id=1054537
> >
> >
> >
> > --- Comment #2 from Karl Auerbach <karl@iwl.com> ---
> > --> https://bugzilla.redhat.com/attachment.cgi?id=851413
> > Simple program to cause this kernel issue
> >
> > This is a C program that must be run with root privilege. It runs fine on
> > older kernels but causes a kernel problem on the most recent one.
> >
> > The code creates a raw socket with transmit and receive ring buffers.
> >
> > The rings are then made visible via mmap().
> >
> > When munmap() is called things go awry.
> >
> > The code in this example was quickly lifted from a larger body of code that has
> > been running for several years.
It looks to be THP related, you can also use the Linux kernel
selftest suite for networking to trigger that, I've reported
it here:
https://lkml.org/lkml/2014/1/10/427
Vlastimil seems to have proposed some possibilities, but it
seems discussion stalled for now.
Cheers,
Daniel
> #include <assert.h>
> #include <errno.h>
> #include <stdio.h>
> #include <stdlib.h>
> #include <stdarg.h>
> #include <unistd.h>
>
> #include <arpa/inet.h>
> #include <sys/ioctl.h>
> #include <sys/mman.h>
> #include <sys/socket.h>
> #include <sys/un.h>
> #include <sys/user.h>
>
> #include <features.h> /* for the glibc version number */
> #include <net/ethernet.h>
> #include <linux/if_packet.h>
> #include <linux/if_ether.h>
>
> #include <net/if.h>
> #include <netinet/in.h>
> #include <sys/ioctl.h>
> #include <sys/types.h>
> #include <linux/if_tun.h>
>
> #define NIL 0
>
> typedef int SOCKET;
>
> int main(int argc, char *argv)
> {
> size_t RxMmap_Size;
> size_t TxMmap_Size;
> unsigned int Ether_Sz;
> unsigned int Block_Sz_Order;
> unsigned int Block_Sz;
> unsigned int Block_Cnt;
> unsigned int Frame_Sz;
> unsigned int Frame_Cnt;
> unsigned int Frames_Per_Block;
>
> void * Mmap_Addr;
> size_t Mmap_Size;
> size_t TXDataOffset;
>
> SOCKET Socket;
>
> struct tpacket_req ring_req;
>
> Ether_Sz = 1518;
> Block_Sz = Ether_Sz;
> Block_Sz_Order = 2; // 16384 byte blocks
> Block_Cnt = 1000;
>
> Socket = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
> if (Socket == -1)
> {
> perror("socket failed");
> return 1;
> }
>
> Frame_Sz = TPACKET_ALIGN(TPACKET_ALIGN(TPACKET2_HDRLEN) + Ether_Sz);
> TXDataOffset = TPACKET2_HDRLEN - sizeof(struct sockaddr_ll);
>
> Block_Sz = getpagesize() << Block_Sz_Order;
>
> Frames_Per_Block = Block_Sz / Frame_Sz;
> Frame_Cnt = Frames_Per_Block * Block_Cnt;
>
> RxMmap_Size = Block_Sz * Block_Cnt;
> TxMmap_Size = RxMmap_Size;
>
> Mmap_Size = RxMmap_Size + TxMmap_Size;
>
> // Establish receive ring
> // For convenience we will let it be the same size as the TX ring
> // The mmap size calculations, far above, assume that the
> // rings are the same size.
> ring_req.tp_block_nr = Block_Cnt;
> ring_req.tp_frame_size = Frame_Sz;
> ring_req.tp_block_size = Block_Sz;
> ring_req.tp_frame_nr = Frame_Cnt;
> if (setsockopt(Socket, SOL_PACKET, PACKET_RX_RING,
> (char *)&ring_req, sizeof(ring_req)) < 0)
> {
> perror("Setsockopt RX_RING failed");
> close(Socket);
> return -1;
> }
>
> // Establish transmit ring
> // For convenience we will let it be the same size as the RX ring
> // The mmap size calculations, far above, assume that the
> // rings are the same size.
> ring_req.tp_block_nr = Block_Cnt;
> ring_req.tp_frame_size = Frame_Sz;
> ring_req.tp_block_size = Block_Sz;
> ring_req.tp_frame_nr = Frame_Cnt;
> if (setsockopt(Socket, SOL_PACKET, PACKET_TX_RING,
> (char *)&ring_req, sizeof(ring_req)) < 0)
> {
> perror("Setsockopt TX_RING failed");
> close(Socket);
> return -1;
> }
>
> Mmap_Addr = mmap(NIL, Mmap_Size, PROT_READ | PROT_WRITE,
> MAP_SHARED | MAP_LOCKED, Socket, 0);
>
> if (Mmap_Addr == MAP_FAILED)
> {
> perror("mmap failed");
> return 1;
> }
>
> if (Mmap_Addr != MAP_FAILED)
> {
> (void)munmap(Mmap_Addr, Mmap_Size);
> }
>
> close(Socket);
> return 0;
> }
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
prev parent reply other threads:[~2014-01-22 22:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-1054537-176318@bugzilla.redhat.com>
[not found] ` <bug-1054537-176318-JYaNmE5vAr@bugzilla.redhat.com>
2014-01-22 22:39 ` packet mmap related oops (with reproducer) Dave Jones
2014-01-22 22:45 ` Daniel Borkmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E04A1D.8080803@redhat.com \
--to=dborkman@redhat.com \
--cc=davej@redhat.com \
--cc=kernel-team@fedoraproject.org \
--cc=netdev@vger.kernel.org \
--cc=vbabka@suse.cz \
--cc=walken@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).