Re: IPv6 FIB related crash with MACVLANs in 3.9.11+ kernel.

[Ben Greear <greearb@candelatech.com>]

On 02/03/2014 02:06 PM, Ben Greear wrote:
> On 02/03/2014 02:03 PM, Hannes Frederic Sowa wrote:
>> Hi Ben,
>>
>> On Mon, Feb 03, 2014 at 12:37:52PM -0800, Ben Greear wrote:
>>> The kernel has some additional patches, but not much to IPv6.
>>>
>>> The bug is that when we have lots of mac-vlans on some ixgbe ports
>>> (500 per interface in this case), and boot up the system with the ports unplugged,
>>> we get this crash almost every time.  Boot-up is going to do normal bootup
>>> stuff plus create and configure the 1000 mac-vlans, dump their routing
>>> tables, etc.
>>>
>>> We are using one routing table per network device, and some
>>> ip rules.
>>>
>>> If we plug in the ixgbe ports, we do not ever see a crash.
>>>
>>> We have not yet tried reproducing it on other drivers, but I suspect
>>> the issue is not related to ixgbe.
>>>
>>> Any ideas on this one?
>>
>> Could you bring the machine to a panic again with enabling RT6_DEBUG at the
>> top of ip6_fib.c and send a dump of the trace?
> 
> Yes, but it will be a bit until we can create a duplicate machine.
> We ended up delivering the machine with a note to make sure the
> interfaces were plugged in (we found the bug hours before shipping
> the system, of course).

According to my system test guy, it took a lot longer to reproduce
the problem with the debug enabled kernel, but I do not see any extra
debug messages on the serial console logging or in /var/log/messages

Thanks,
Ben


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com