From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: davem@davemloft.net, Jean Sacren <sakiwit@gmail.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Mitch Williams <mitch.a.williams@intel.com>
Subject: Re: [net-next 08/13] i40e/i40evf: fix error checking path
Date: Tue, 01 Apr 2014 16:14:36 +0400 [thread overview]
Message-ID: <533AADAC.2090301@cogentembedded.com> (raw)
In-Reply-To: <1396308899-20926-9-git-send-email-jeffrey.t.kirsher@intel.com>
Hello.
On 01-04-2014 3:34, Jeff Kirsher wrote:
> From: Jean Sacren <sakiwit@gmail.com>
> The commit 6494294f277fd ("i40e/i40evf: Use
> dma_set_mask_and_coherent") uses dma_set_mask_and_coherent() to
> replace dma_set_coherent_mask() for the benefit of return error.
> The conversion brings some confusion in error checking as whether
> against DMA_BIT_MASK(64) or DMA_BIT_MASK(32). For one, if error is
> zero, the check will be against DMA_BIT_MASK(64) twice.
So what?
> Fix this
> error checking by binding the check to the pertinent one.
There's nothing wrong with the current code. I don't know what you're
fixing here.
> Cc: Mitch Williams <mitch.a.williams@intel.com>
> Signed-off-by: Jean Sacren <sakiwit@gmail.com>
> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
> drivers/net/ethernet/intel/i40e/i40e_main.c | 11 ++++++-----
> drivers/net/ethernet/intel/i40evf/i40evf_main.c | 11 ++++++-----
> 2 files changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index a1ec793..861b722 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -8091,12 +8091,13 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> /* set up for high or low dma */
> err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> - if (err)
> - err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> if (err) {
> - dev_err(&pdev->dev,
> - "DMA configuration failed: 0x%x\n", err);
> - goto err_dma;
> + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (err) {
> + dev_err(&pdev->dev,
> + "DMA configuration failed: 0x%x\n", err);
> + goto err_dma;
> + }
> }
>
> /* set up pci connections */
> diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
> index 51c84c1..e35e66f 100644
> --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
> +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
> @@ -2191,12 +2191,13 @@ static int i40evf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> return err;
>
> err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> - if (err)
> - err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> if (err) {
> - dev_err(&pdev->dev,
> - "DMA configuration failed: 0x%x\n", err);
> - goto err_dma;
> + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (err) {
> + dev_err(&pdev->dev,
> + "DMA configuration failed: 0x%x\n", err);
> + goto err_dma;
> + }
> }
>
> err = pci_request_regions(pdev, i40evf_driver_name);
>
WBR, Sergei
next prev parent reply other threads:[~2014-04-01 12:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-31 23:34 [net-next 00/13][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2014-03-31 23:34 ` [net-next 01/13] e1000e: Fix no connectivity when driver loaded with cable out Jeff Kirsher
2014-04-01 12:06 ` Sergei Shtylyov
2014-04-01 12:30 ` Fabio Estevam
2014-04-01 16:07 ` Thomas Gleixner
2014-04-18 13:15 ` Ben Hutchings
2014-04-18 15:27 ` Ertman, DavidX M
2014-03-31 23:34 ` [net-next 02/13] ixgbe: remove redundant if clause from PTP work Jeff Kirsher
2014-03-31 23:34 ` [net-next 03/13] ixgbe: never generate both software and hardware timestamps Jeff Kirsher
2014-03-31 23:34 ` [net-next 04/13] ixgbe: fix race conditions on queuing skb for HW time stamp Jeff Kirsher
2014-03-31 23:34 ` [net-next 05/13] ixgbe: fix ixgbe_check_reset_blocked() declaration Jeff Kirsher
2014-03-31 23:34 ` [net-next 06/13] ixgbevf: Change ixgbe_read_reg to ixgbevf_read_reg Jeff Kirsher
2014-03-31 23:34 ` [net-next 07/13] i40e: fix function kernel doc description Jeff Kirsher
2014-03-31 23:34 ` [net-next 08/13] i40e/i40evf: fix error checking path Jeff Kirsher
2014-04-01 12:14 ` Sergei Shtylyov [this message]
2014-03-31 23:34 ` [net-next 09/13] i40e/i40evf: Remove addressof casts to same type Jeff Kirsher
2014-03-31 23:34 ` [net-next 10/13] i40e: Remove casts of pointer " Jeff Kirsher
2014-03-31 23:34 ` [net-next 11/13] INTEL-IGB: Convert iounmap to pci_iounmap Jeff Kirsher
2014-03-31 23:34 ` [net-next 12/13] ixgbe: Fix rcu warnings induced by LER Jeff Kirsher
2014-03-31 23:34 ` [net-next 13/13] ixgbevf: " Jeff Kirsher
2014-04-01 1:19 ` [net-next 00/13][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533AADAC.2090301@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=mitch.a.williams@intel.com \
--cc=netdev@vger.kernel.org \
--cc=sakiwit@gmail.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).