Re: [PATCH regression] net: phy: fix initialization (config_init) for Marvel 88E1116R PHYs

[Alexander Holler <holler@ahsoftware.de>]

Am 03.04.2014 10:49, schrieb Sebastian Hesselbarth:
> On 04/03/2014 09:17 AM, Alexander Holler wrote:
>> Am 03.04.2014 00:27, schrieb Sebastian Hesselbarth:
>>> On 04/03/2014 12:12 AM, Alexander Holler wrote:
>>>>> I am curious, how you determined above commit to be the cause of the
>>>>> regression you are seeing. Can you bisect, if you didn't already?
>>>>
>>>> There was no bisecting necessary. I've just looked at what changed in
>>>> mv643xx_eth since 3.13 and the first commit I've reverted was already a
>>>> hit. Reading a bit source revealed the differences between the old reset
>>>> and the newly used one and ended up with my patch (first try) and was a
>>>> hit too.
>>>
>>> Honestly, your own fix changes a different driver than mv643xx_eth.
>>
>> It changes stuff which now (through the mentioned commit) gets used
>> through the change in mv643xx_eth.
>
> Sigh. You have proven youself that the commit isn't the root cause
> of the issue you are seeing. Nor is "fixing" 88e1116r init sequence
> a reasonable fix.

Sorry, continuing this discussion doesn't make sense. You have the same 
hw, so just try enabling netconsole with 3.14 and use dhcpcd from 
userland (this does the final reset here which hangs.

But don't suggest me (or insist on) a time consuming and totally useless 
bisect when I already know what makes the problem to appear (100% 
reliable here).

I have better ways to waste my time.

Alexander Holler